Brass hilt briquet type hanger....British cutlass?

[Jim McDougall]

Originally Posted by David R

I would look across the Channel for this one. Britain did not really go for brass hilts after the 1790's as far as I know..... I am confident of correction if I am wrong.

There were issues against brass hilts in England some time before having to do with Cutlers Co. etc. but they very much did use brass hilts in many cases. This saber I think may be naval, as it corresponds to others I have seen that were by EGG, and around 1790s, this is Wooley & Deakin (1801-03) and Mark Eley had another. I have had two dragoon officers swords c. 1770s in brass. Brass was key for gilt work on many officers swords.
You are right though, the inspiration DID come from across the channel for this sword.

[M ELEY]

Hello Jim. I do recall discussing these interesting briquet patterns, including ones with a small anchor stamp. The French were indeed the first to embrace naval cutlasses with a solid brass hilt and Gilkerson (Boarder's Away, my 'bible' and go-to always!) has covered them nicely, showing their development. Likewise, regarding the briguet, which came directly from these French 'sea' patterns, they probably would have ben well-received in desparate times to arm volunteers against invasion. The reason the brass hilts were popular on sea swords was for their anti-rust properties in the briney salt air.

Another deductive thought was that most naval hangers were also popular/carried by infantrymen, so could the briquet (being an infantry-type) make the same crossover to naval usage? I've always wondered about this. If so, I'd wager it would only have been in the scenario you proposed (desparate measures for voluntary forces or militias or merchant-type craft). Still, I know there doesn't appear to be any record to such use in Britain unless someone out there can enlighten us!?

Didn't we also definitely determine that there were briquets (not the French pre-naval brass gripped types, but actual briquets!) with the anchor stamp? Perhaps my memory has become cloudy again!

[M ELEY]

P.S. I still have that awesome hanger of the Wooley/Deacon type with gold wash to the hilt and classic Montmorancy blade! Just whistles British naval officer!

Here it is! The thread concerning this briquet and the anchor stamp-

http://www.vikingsword.com/vb/showth...t+anchor+stamp

[Jim McDougall]

Thank you Capn!! I hoped you'd enter this foray into the mystery of this anomaly. As you agree this curious old 'briquet' might well have to do with this period of pre-Napoleonic times in England, which seem never to have been well documented.
When the early writers on British swords such as Ffoulkes had little clue on these, which later were carried forth in Wilkinson writings (and again by Claude Blair) claiming they were British 'foot artillery hangers......these became the classification Gospel for collectors, at least in degree.

Actually these were never a highly collectible item, and most that were ever seen were of course French, which were well known (hence the colloquial term briquet). It was noted later in an article that no British example of 'briquet' was ever known that had substantiating markings identifying it as such, had ever been seen.

It was that several examples had been seen in the Tower dated 1830 which gave the impression these had been British.

However, as I had explained in that previous thread (thank you for the link!) the cartouche on this example with the distinctive cartouche with initials PS is compelling. It does NOT coincide with any type of marking used in weapons of other countries, including France.

It does however correspond to the early hallmark stamp of Paul Storr from c. 1792+. While this type stamp of course was used only by artisans using precious metals, it is known that in cases some did place stamps with initials regardless of metal used.
In these 'times of concern' where there was a notable civilian movement of ersatz defensive measures, it is noted in one reference that workers and artisans in many trades joined in to produce needed supplies and even weaponry.
It seems quite possible that Paul Storr, already working with other artisans closely aligned with the Royal House, might 'do his part' by creating a number of these hangers for 'the cause' and proudly place his well earned mark as testament to that.

The paucity of examples of these munitions grade weapons is directly related to their commonality overall, and that they were 'in bulk' excellent source for much needed brass metal, and were likely scrapped in huge volume.

A rather grim note on the post war use of the materials and other was recently found when I was researching the battlefields of Waterloo and other actions associated. It is well known that huge numbers of casualties were buried in huge mass graves there, however recent excavations revealed there are virtually no remains to be found archaeologically (save several noted graves of several individuals).
The horrifying fact seems to have been that these huge caches of remains were dug up to be put to use, with bone ground into fertilizer which became in scale a commodity much in the way Egyptian mummies were unceremoniously used.

While most weaponry found on these fields was of course taken as surplus, many more common items became of course smelting fodder, which would include of course these kinds of solid brass hilt swords.

With regard to the anchor stamp, in review of the previous thread on this topic, it seems that was a known Swedish mark used generally and not specific to naval items.

[CutlassCollector]

I have never owned one of these and so can not add much to the discussion although I have found it confusing as to where they fit into the cutlass world.

They are often offered for sale as British Cutlass or French cutlass but are not covered in the British or French literature on the official patterns. In Le Sabre D'abordage, Petard describes a few brass hilted cutlasses from the end of the 18th century but not the briquet.

Of course that does not preclude them from sea service in the private sector or other associated naval units as well as land based use as already mentioned.

What puzzles me is the common pattern attributed to several different countries. Were they made and sold to any buyer like Solingen blades or just copied?

[corrado26]

By "Mervyn Milton, The policeman's lot, London 1985, p. 108" one can read, that "the actual briquet never made it across the English Channel. This type of weapon does not appear in the UK. Prey pieces in a new way are not known. The "Police Swords and Hangers" are complex pieces, mostly made at "Parker, Field & Sons, 233 Holborn, London". So the sword in question should come from the continent, where it was in use in lots of countries as nearly all German states, France, Switzerland, Spain, Austria and Belgium.

[Jim McDougall]

Originally Posted by corrado26

By "Mervyn Milton, The policeman's lot, London 1985, p. 108" one can read, that "the actual briquet never made it across the English Channel. This type of weapon does not appear in the UK. Prey pieces in a new way are not known. The "Police Swords and Hangers" are complex pieces, mostly made at "Parker, Field & Sons, 233 Holborn, London". So the sword in question should come from the continent, where it was in use in lots of countries as nearly all German states, France, Switzerland, Spain, Austria and Belgium.

Thank you Udo, excellent cite and thanks for the source detail. The swords for civil service are another area which is it seems not well covered in research material, so this reference is much appreciated.

It seems there is somewhat a consensus that the so called 'briquet' from the Continent was never part of the armory in Great Britain. It is almost bizarre that I never pursued this beyond simply assuming that Wilkinson and Blair in their books and classified these as 'foot artillery gunner' sword, British, was correct.

I think it can be established that the briquet, as a weapon form generally used in Great Britain indeed never happened, as shown in the Morrison article I added in previous post (thanks to Bryce who found it originally).

However, the point being made here is that in these times in pre Napoleonic campaigns England, there was a pallor of fear of French invasion. At this point there was no standardization or regulation of military arms and there was a large push for civil readiness which led to the participation of local artisans, and producers of many wares in making supplies and even weaponry in an ersatz manner.

That is what in my opinion makes this sword so unique, the PS initials align compellingly with Paul Storr, an English precious metals artisan. That places this weapon SOUNDLY on the English side of the channel.

There are many cases of course, where weapons became popular outside regulation or known record at large. The fact that a very limited degree of weapons in England were copied from French forms in a number of elements such as the Woolley & Deakin swords with fluted ebony grips (a French affectation) the 'Montmorency' blade, also of French association. ...suggests that the influences were there, even if not largely apparent.

These are the thoughts I am operating on with this idea, and I am very grateful for these kinds of detail which can test the theory objectively.
Thank you again.

[David R]

Originally Posted by Jim McDougall

There were issues against brass hilts in England some time before having to do with Cutlers Co. etc. but they very much did use brass hilts in many cases. This saber I think may be naval, as it corresponds to others I have seen that were by EGG, and around 1790s, this is Wooley & Deakin (1801-03) and Mark Eley had another. I have had two dragoon officers swords c. 1770s in brass. Brass was key for gilt work on many officers swords.
You are right though, the inspiration DID come from across the channel for this sword.

I was meaning the all brass hanger style hilts so popular on the continent... Brass guards and back-straps were ubiquitous for Infantry and Naval officers of course.... Iron/steel preferred for cavalry and black painted cast and wrought iron for naval cutlasses.

[Jim McDougall]

Originally Posted by David R

I was meaning the all brass hanger style hilts so popular on the continent... Brass guards and back-straps were ubiquitous for Infantry and Naval officers of course.... Iron/steel preferred for cavalry and black painted cast and wrought iron for naval cutlasses.

Thanks David for clarifying, I misunderstood. I recall decades ago when I got the Wooley & Deakin sword where it was classified a cavalry officers sword. But the blade was so short for cavalry, later I discovered that in naval situations there were cavalry and infantry patterns used of course.