Photos from museum of Tabor. Czechia

Spiridonov · 30th July 2009, 05:20 AM

Hi, Michael! Thaks for nice phtos

Quote:

Originally Posted by Matchlock

you can see that the rectanguar pan around the touch hole on the top flat is a later repair, a working addition of ca. 1500

Why did you thinking that it is a later repair?

Matchlock · 30th July 2009, 12:39 PM

Quote:

Originally Posted by Spiridonov

Why did you thinking that it is a later repair?

Hi Spridonov,

Simply because, as I stated, pans and covers were not extant before ca. 1500. As this barrel is stylistically clearly earlier than 1500, the pan must be a later addition. If you look closely at the lower brim of the pan you will see traces of soldering.

Best,
Michael

Spiridonov · 30th July 2009, 01:02 PM

Yes, you are right. I see that

Spiridonov · 30th July 2009, 01:10 PM

Where was stored a ramrod using the weapon of this kind?
It could be in the barrel channel on a march but during time when the barrel has been charged it it was impossible.

Matchlock · 30th July 2009, 05:11 PM

Very good question indeed, Spiridonov!

Ramrods of Gothic and Renaissance artillery pieces, such as haquebuts/wallguns, were not an integral part of the stock and barrel, as was the case with handguns/arquebuses. To fully understand this answer one should bear in mind that such relatively heavy pieces were mounted on special carriages for field use which were often equipped with more than one haquebut. These carriages also held all the accouterments necessary for loading and cleaning the guns, including ramrods, readily measured and packed loads etc.

I attach some watercolors from the Landshuter Zeughausinventar, the armory inventory, set up by Ulrich Bessnitzer in 1485 (Landshut is a medieval city in Lower Bavaria mostly known for their armorers) depicting 'brass' or 'bronze' haquebut barrrels on their carriages together with all the loading implements which were stored in special painted wooden chests (Zeuglade, Zeug meaning weapons and Lade meaning chest).
The text to the first illustration states that 'Sechs Streitwagen zu Hagkenpuchsn', six war carriages for haquebuts, were kept in the Landshut armory in 1485!

The last illustration shows 'Hultzein Ladung', wooden containers for measured barrel loads of powder - the predecessors of bandoliers!

Best,
Michael

Matchlock · 30th July 2009, 05:36 PM

Hi Spiridonov,

Now back to your question about ramrods of portable handguns/arquebuses such as the small Hussite barrel of ca. 1430 which originally had a tiller stock: a stick stock usually had no provision for a ramrod and the latter had to be carried separately.

As we see on the Polish gun of ca. 1500 though, this problem was sometimes solved by drilling the tiller/stick stock out and storing the ramrod there (last picture).

Other clever solutions were mounting the ramrod on the left side of the forestock when a hook made a ramrod chanel impossible below the barrel, or make the hook with a loop for the rod to pass thru.

Samples attached.

Best,
Michael

Spiridonov · 3rd August 2009, 09:06 PM

Hollow, Michael

I have some questions about this barrel:

1. What is the calibre of this gun?
2. I saw some brands on this weapon. It would be desirable to consider them more in detail if it is possible
3. How does the barrel connected with stock?
4. Was the barrel painted or not?
5. What is the strange metall tip at the ramrod?
6. was the stock been impregnated by something or not? For example, linen oil
7. How does it dated?

With the best regards, Alexander!

30th July 2009, 05:11 PM	#5
Matchlock (deceased) Join Date: Sep 2008 Location: Bavaria, Germany - the center of 15th and 16th century gunmaking Posts: 4,310	Very good question indeed, Spiridonov! Ramrods of Gothic and Renaissance artillery pieces, such as haquebuts/wallguns, were not an integral part of the stock and barrel, as was the case with handguns/arquebuses. To fully understand this answer one should bear in mind that such relatively heavy pieces were mounted on special carriages for field use which were often equipped with more than one haquebut. These carriages also held all the accouterments necessary for loading and cleaning the guns, including ramrods, readily measured and packed loads etc. I attach some watercolors from the Landshuter Zeughausinventar, the armory inventory, set up by Ulrich Bessnitzer in 1485 (Landshut is a medieval city in Lower Bavaria mostly known for their armorers) depicting 'brass' or 'bronze' haquebut barrrels on their carriages together with all the loading implements which were stored in special painted wooden chests (Zeuglade, Zeug meaning weapons and Lade meaning chest). The text to the first illustration states that 'Sechs Streitwagen zu Hagkenpuchsn', six war carriages for haquebuts, were kept in the Landshut armory in 1485! The last illustration shows 'Hultzein Ladung', wooden containers for measured barrel loads of powder - the predecessors of bandoliers! Best, Michael Attached Images

30th July 2009, 05:36 PM	#6
Matchlock (deceased) Join Date: Sep 2008 Location: Bavaria, Germany - the center of 15th and 16th century gunmaking Posts: 4,310	Hi Spiridonov, Now back to your question about ramrods of portable handguns/arquebuses such as the small Hussite barrel of ca. 1430 which originally had a tiller stock: a stick stock usually had no provision for a ramrod and the latter had to be carried separately. As we see on the Polish gun of ca. 1500 though, this problem was sometimes solved by drilling the tiller/stick stock out and storing the ramrod there (last picture). Other clever solutions were mounting the ramrod on the left side of the forestock when a hook made a ramrod chanel impossible below the barrel, or make the hook with a loop for the rod to pass thru. Samples attached. Best, Michael Attached Images

30th July 2009, 01:02 PM	#3
Spiridonov Member Join Date: Nov 2008 Location: Russia, Leningrad Posts: 355	Yes, you are right. I see that

30th July 2009, 01:10 PM	#4
Spiridonov Member Join Date: Nov 2008 Location: Russia, Leningrad Posts: 355	Where was stored a ramrod using the weapon of this kind? It could be in the barrel channel on a march but during time when the barrel has been charged it it was impossible.

3rd August 2009, 09:06 PM	#7
Spiridonov Member Join Date: Nov 2008 Location: Russia, Leningrad Posts: 355	Hollow, Michael I have some questions about this barrel: 1. What is the calibre of this gun? 2. I saw some brands on this weapon. It would be desirable to consider them more in detail if it is possible 3. How does the barrel connected with stock? 4. Was the barrel painted or not? 5. What is the strange metall tip at the ramrod? 6. was the stock been impregnated by something or not? For example, linen oil 7. How does it dated? With the best regards, Alexander!