Tombak for comment

Henk · 4th December 2004, 09:14 AM

Wolviex,

It is always pleasant to have some experts around you to decide and to discuss. The only restoring I would like to do on such a piece is the traditional etching with warangan to get up the pamor. It can be smashing such a result. I brought some rusty kerisses to a friend of my who can do the washing. When you see the keris without rust completely white metal and then the warangan doing its job and the complete unexpected pamor coming up, that's exitement.

The one Rick is showing us is mounted as a dagger. The mounting is probably maduran. Yours was mounted as a spear. Considering the patina of the scabbard it is certainly not younger than late 19th century. There are carved examples of these scabbards known but this scabbard is the most usual one. At the top and at the bottom it had a cord with a knot like you see on european military sabres. The blade could be older because the mountings where often replaced. The wooden parts where rotting away in your hands as they use to say. You can see at the edges and the blade itself that this washing with warangan was frequently done. The surface of Rick's tombak is smoother. Rick's one is younger but is also dated.

Nice tomback too, Rick!!

wolviex · 4th December 2004, 11:25 AM

Thank you Henk for your comments. I'll ask experts of metal conservation, what are their possibilities about getting up pamor.

By the way, did you noticed red paint at the end of the scabbard ?

Best regards

Henk · 4th December 2004, 03:40 PM

You're welcome Wolviex, and make sure if the experts wants to do something that warangan is used in the right way. Can you imagine how nice it would be if the conservator of the museum is willingly to ship it to someone of the forummembers who is able to do the washing?

I noticed the red tip of the scabbard. I also see some black spurs. Is that dirt or remains of black paint? I've tombak with a scabbard that is completely red painted.
I will try to scan some drawings of a tombak next week at school so that you have an idea how your tombak must have looked like.

nechesh · 4th December 2004, 07:19 PM

Wolviex, Henk makes a good point. Don't be surprised is your expert in metal conservation looks at you cross-eyed and in confusion when it comes to raising the pamor on this tombak. This is a cultural skill which i doubt you would come across in many museum conservators. There are real experts in this craft that your museum could send this blade out to, but knowing museum they will probably chose not too. Often museums are more concerned with merely maintaining condition rather than restoring it.

wolviex · 4th December 2004, 08:37 PM

Well, I didn't wrote it Nenesh, but I think the same about museums (O boy! and I work in one of them

). I was afraid you'll think about Krakow's National Musuem - what a backward ruin, they don't know how to make pomor, but now I see that my afraids are the same what yours

I admit, chances are not big, but I'll try. Knowing the financial situation, Musuem won't decide to send it elsewhere, especially, this object isn't such important "for Polish historical and cultural aspects" and dspite it's nice, it isn't special.

Adni Aljunied · 7th December 2004, 04:08 PM

Both tombaks have similar features, but closer look at the "metok" or ferrule shows that the one wolviex has is seperated whereas Rick's has it made one with the blade, or "seiras".
More commonly seen from Sumatra or Malaysian regions are the seiras tombaks, while the other type are more Javanese inclined, although there are exceptions. The not very contrasting pamor on Rick's tombak also has less Javanese features, and I'm sure with a good washing, wolviex's tombak will show good contrast.
Do retain the sheath please, and give it some good old English oils or other wood oils to "relive" it back again, and maybe a longer shaft for the handle. On that note, I would consider both pieces more as a "lembing", a throwing spear, rather than a "tombak" (lance) from it's more slimmmer and rather "aerodynamic" features. But again, there are a few views on the diffrences between a tombak and a lembing, as it is with a lance and a spear.

Rick · 7th December 2004, 04:12 PM

Adni , I was suprised at how smooth the surface of my piece is .
Can you make any comment on that ?
It's good to see you here .

4th December 2004, 09:14 AM	#1
Henk Member Join Date: Dec 2004 Location: The Netherlands Posts: 1,209	Wolviex, It is always pleasant to have some experts around you to decide and to discuss. The only restoring I would like to do on such a piece is the traditional etching with warangan to get up the pamor. It can be smashing such a result. I brought some rusty kerisses to a friend of my who can do the washing. When you see the keris without rust completely white metal and then the warangan doing its job and the complete unexpected pamor coming up, that's exitement. The one Rick is showing us is mounted as a dagger. The mounting is probably maduran. Yours was mounted as a spear. Considering the patina of the scabbard it is certainly not younger than late 19th century. There are carved examples of these scabbards known but this scabbard is the most usual one. At the top and at the bottom it had a cord with a knot like you see on european military sabres. The blade could be older because the mountings where often replaced. The wooden parts where rotting away in your hands as they use to say. You can see at the edges and the blade itself that this washing with warangan was frequently done. The surface of Rick's tombak is smoother. Rick's one is younger but is also dated. Nice tomback too, Rick!! Last edited by Henk; 4th December 2004 at 09:29 AM.

4th December 2004, 08:37 PM	#5
wolviex Member Join Date: Dec 2004 Location: Poland, Krakow Posts: 418	The truth come to light Well, I didn't wrote it Nenesh, but I think the same about museums (O boy! and I work in one of them ). I was afraid you'll think about Krakow's National Musuem - what a backward ruin, they don't know how to make pomor, but now I see that my afraids are the same what yours I admit, chances are not big, but I'll try. Knowing the financial situation, Musuem won't decide to send it elsewhere, especially, this object isn't such important "for Polish historical and cultural aspects" and dspite it's nice, it isn't special.

7th December 2004, 04:12 PM	#7
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,339	Adni Adni , I was suprised at how smooth the surface of my piece is . Can you make any comment on that ? It's good to see you here .

4th December 2004, 11:25 AM	#2
wolviex Member Join Date: Dec 2004 Location: Poland, Krakow Posts: 418	Thank you Henk for your comments. I'll ask experts of metal conservation, what are their possibilities about getting up pamor. By the way, did you noticed red paint at the end of the scabbard ? Best regards

4th December 2004, 03:40 PM	#3
Henk Member Join Date: Dec 2004 Location: The Netherlands Posts: 1,209	You're welcome Wolviex, and make sure if the experts wants to do something that warangan is used in the right way. Can you imagine how nice it would be if the conservator of the museum is willingly to ship it to someone of the forummembers who is able to do the washing? I noticed the red tip of the scabbard. I also see some black spurs. Is that dirt or remains of black paint? I've tombak with a scabbard that is completely red painted. I will try to scan some drawings of a tombak next week at school so that you have an idea how your tombak must have looked like.

4th December 2004, 07:19 PM	#4
nechesh Member Join Date: Dec 2004 Location: Cincinnati, OH Posts: 940	Wolviex, Henk makes a good point. Don't be surprised is your expert in metal conservation looks at you cross-eyed and in confusion when it comes to raising the pamor on this tombak. This is a cultural skill which i doubt you would come across in many museum conservators. There are real experts in this craft that your museum could send this blade out to, but knowing museum they will probably chose not too. Often museums are more concerned with merely maintaining condition rather than restoring it.

7th December 2004, 04:08 PM	#6
Adni Aljunied Member Join Date: Dec 2004 Location: singapore Posts: 13	Both tombaks have similar features, but closer look at the "metok" or ferrule shows that the one wolviex has is seperated whereas Rick's has it made one with the blade, or "seiras". More commonly seen from Sumatra or Malaysian regions are the seiras tombaks, while the other type are more Javanese inclined, although there are exceptions. The not very contrasting pamor on Rick's tombak also has less Javanese features, and I'm sure with a good washing, wolviex's tombak will show good contrast. Do retain the sheath please, and give it some good old English oils or other wood oils to "relive" it back again, and maybe a longer shaft for the handle. On that note, I would consider both pieces more as a "lembing", a throwing spear, rather than a "tombak" (lance) from it's more slimmmer and rather "aerodynamic" features. But again, there are a few views on the diffrences between a tombak and a lembing, as it is with a lance and a spear.