A large 19th century flintlock pistol

fernando · 9th February 2021, 06:26 PM

Quote:

Originally Posted by corrado26

half an hour ago:

Are there bears in your neighbourhood, Udo ?

.

Pukka Bundook · 10th February 2021, 05:46 AM

Naaa, they went south for warmer weather..

Norman McCormick · 10th February 2021, 05:39 PM

Hi Rick,
Any chance of dismounting the barrel on your pistol and photographing any marks in closeup plus of course the marks Fernando has already mentioned.
My Regards,
Norman.

corrado26 · 10th February 2021, 06:22 PM

and here is one with some marks

corrado26 · 10th February 2021, 06:24 PM

another one with a tugra on its barrel

corrado26 · 10th February 2021, 06:27 PM

and the next one with the mark of the Isfahan arsenal on its lockplate

corrado26 · 10th February 2021, 06:30 PM

and last a same pistol with an unknown signature at its lockplate - could eventually be a year?

corrado26 · 10th February 2021, 11:28 AM

Quote:

Originally Posted by fernando

Are there bears in your neighbourhood, Udo ?

.

No, just a joke!

rickystl · 10th February 2021, 03:57 PM

Interesting discussion on this pistol. Here is one that I own. The stock finish is almost completely worn off. Looks like someone was going to refinish it but never completed. But there is no evidence of later sanding. Also, it appears the lock and barrel were chemically cleaned sometime in the past.

I've always known this pistol by it's generic name of Belgium Navel Pistol, in use from about 1810 to 1835. I recall reading somewhere that this pistol was made by the thousands and sold everywhere. That Bannerman's early catalog had surplus still for sale probably attests to the quantity made.

Interesting the lack of a ramrod provision. My guess is that a separate loading rod suspended from a leather cord around the neck, was the thinking behind the pistol's design. But I may be wrong in that I've never seen what you might call a "European" type standardized loading rod for these pistols. Much like most of the pistols carried by troops in the Ottoman Empire. Combined with the use of pre-formed paper cartridges, re-loading is very quick. I can actually confirm this from a trial I did firing my pistol using this method. The separate rod around the neck is even more convenient than the later captured type ramrod.
On the other hand, as mentioned above, all of these pistols aboard a ship may have been loaded at the same time and then fired once during a ship-to-ship battle, and then used as a club or parrying piece.
The pistol is very robustly made. The front barrel wedge (versus a pin) is especially convenient. Just about every example I've seen is still, or can be easily returned to shooting condition today.

Rick

rickystl · 10th February 2021, 03:59 PM

Woops. Forgot the photos.....

fernando · 10th February 2021, 04:33 PM

Is that some mark, Rick ?

.

rickystl · 10th February 2021, 04:42 PM

Hi Fernando

Yes, I seem to recall it is. But can't remember. Been a while since I've handled/fired it. I'll check it out when I get home tonight.

Rick

rickystl · 13th February 2021, 08:14 PM

Quote:

Originally Posted by fernando

Is that some mark, Rick ?

.

Hi again Fernando.

No, that's the threaded hole for the mainspring screw.
It's been a while. So I took the barrel and lock off per Norman's request. I'll post what I found with photos below.

Rick

rickystl · 13th February 2021, 08:30 PM

OK. First the lock:

There are no markings on the outside of the lock. Here is what I found on the inside: In the center of the lock plate are the letters: FD FD gd L
The front inside of the lock plate has four intentional hash marks. And a series of small, round punch marks on the inside of the hammer and pan, as well as the pan cover of the frizzen. Maybe just assembly matching.
The first F could be something different as it's partially covered by the mainspring. (I guess I could take the mainspring off)

Rick

fernando · 10th February 2021, 06:31 PM

Quote:

Originally Posted by rickystl

...I've always known this pistol by it's generic name of Belgium Navel Pistol, in use from about 1810 to 1835. I recall reading somewhere that this pistol was made by the thousands and sold everywhere. That Bannerman's early catalog had surplus still for sale probably attests to the quantity made...

Still you find dozens of them for sale out there, with their Liege marks ... one a gift for Captain Mark; the barrel engraved HMS ACHERON

.

.

fernando · 10th February 2021, 06:45 PM

So Udo was faster ... but i've got the ACHERON

.

M ELEY · 10th February 2021, 09:09 PM

Ahh, the Achercon! If only it were not spurious!

I finally took the barrel off of mine, but the only marking on it was 'HK'...

Rick · 11th February 2021, 07:12 PM

Quote:

Originally Posted by M ELEY

Ahh, the Achercon! If only it were not spurious!

I finally took the barrel off of mine, but the only marking on it was 'HK'...

Kinda spurious I guess...

https://en.wikipedia.org/wiki/HMS_Acheron

10th February 2021, 06:22 PM	#4
corrado26 Member Join Date: Dec 2014 Location: Black Forest, Germany Posts: 1,231	and here is one with some marks Attached Images

10th February 2021, 06:24 PM	#5
corrado26 Member Join Date: Dec 2014 Location: Black Forest, Germany Posts: 1,231	another one with a tugra on its barrel Attached Images

10th February 2021, 06:27 PM	#6
corrado26 Member Join Date: Dec 2014 Location: Black Forest, Germany Posts: 1,231	and the next one with the mark of the Isfahan arsenal on its lockplate Attached Images

10th February 2021, 06:30 PM	#7
corrado26 Member Join Date: Dec 2014 Location: Black Forest, Germany Posts: 1,231	and last a same pistol with an unknown signature at its lockplate - could eventually be a year? Attached Images

10th February 2021, 03:59 PM	#10
rickystl Member Join Date: Jul 2010 Location: St. Louis, MO area. Posts: 1,632	Woops. Forgot the photos..... Attached Images

10th February 2021, 05:46 AM	#2
Pukka Bundook Member Join Date: Jan 2007 Posts: 803	Naaa, they went south for warmer weather..

10th February 2021, 05:39 PM	#3
Norman McCormick Member Join Date: Oct 2007 Posts: 1,618	Hi Rick, Any chance of dismounting the barrel on your pistol and photographing any marks in closeup plus of course the marks Fernando has already mentioned. My Regards, Norman.

10th February 2021, 03:57 PM	#9
rickystl Member Join Date: Jul 2010 Location: St. Louis, MO area. Posts: 1,632	Interesting discussion on this pistol. Here is one that I own. The stock finish is almost completely worn off. Looks like someone was going to refinish it but never completed. But there is no evidence of later sanding. Also, it appears the lock and barrel were chemically cleaned sometime in the past. I've always known this pistol by it's generic name of Belgium Navel Pistol, in use from about 1810 to 1835. I recall reading somewhere that this pistol was made by the thousands and sold everywhere. That Bannerman's early catalog had surplus still for sale probably attests to the quantity made. Interesting the lack of a ramrod provision. My guess is that a separate loading rod suspended from a leather cord around the neck, was the thinking behind the pistol's design. But I may be wrong in that I've never seen what you might call a "European" type standardized loading rod for these pistols. Much like most of the pistols carried by troops in the Ottoman Empire. Combined with the use of pre-formed paper cartridges, re-loading is very quick. I can actually confirm this from a trial I did firing my pistol using this method. The separate rod around the neck is even more convenient than the later captured type ramrod. On the other hand, as mentioned above, all of these pistols aboard a ship may have been loaded at the same time and then fired once during a ship-to-ship battle, and then used as a club or parrying piece. The pistol is very robustly made. The front barrel wedge (versus a pin) is especially convenient. Just about every example I've seen is still, or can be easily returned to shooting condition today. Rick

10th February 2021, 04:33 PM	#11
fernando (deceased) Join Date: Dec 2004 Location: Portugal Posts: 9,694	Is that some mark, Rick ? . Attached Images

10th February 2021, 04:42 PM	#12
rickystl Member Join Date: Jul 2010 Location: St. Louis, MO area. Posts: 1,632	Hi Fernando Yes, I seem to recall it is. But can't remember. Been a while since I've handled/fired it. I'll check it out when I get home tonight. Rick

13th February 2021, 08:30 PM	#14
rickystl Member Join Date: Jul 2010 Location: St. Louis, MO area. Posts: 1,632	OK. First the lock: There are no markings on the outside of the lock. Here is what I found on the inside: In the center of the lock plate are the letters: FD FD gd L The front inside of the lock plate has four intentional hash marks. And a series of small, round punch marks on the inside of the hammer and pan, as well as the pan cover of the frizzen. Maybe just assembly matching. The first F could be something different as it's partially covered by the mainspring. (I guess I could take the mainspring off) Rick Attached Images

10th February 2021, 06:45 PM	#16
fernando (deceased) Join Date: Dec 2004 Location: Portugal Posts: 9,694	So Udo was faster ... but i've got the ACHERON .

10th February 2021, 09:09 PM	#17
M ELEY Member Join Date: Dec 2004 Location: NC, U.S.A. Posts: 2,156	Ahh, the Achercon! If only it were not spurious! I finally took the barrel off of mine, but the only marking on it was 'HK'...