A cutlass: where from?

ariel · 24th June 2020, 01:38 PM

A bit... But this one is what Lebedynsky called a " pseudo-shashka" from one of the Central Asian Khanates.

At the beginning of this thread I have casually mentioned Elgood's Greece book as a source of attribution. Memory failed me: I went through that book and could not find it, although I distinctly remember the image. I went through several books and could not find an attribution to Algiers. Gavin also supported the Algerean origin.

Gavin, can you provide a reference, please?

Meanwhile, the closest thing I could find is the very same book by Lebedynsky ( " Les Armes Orientales", p. 68). Both are guardless ( just like mine) and just as short ( compared to the handles) and are labeled as Ottoman, mixes of Pala blade with yataghan mounts (E) and Pala blade with Caucasian shashka mounts (F). Both scabbards are distinctly different, with suspension rings, whereas mine was carried tucked under the belt ( Khyber-like).

ariel · 24th June 2020, 02:00 PM

An interesting and important twist to the story was provided by Aleksej Kurochkin ( here participating as Mercenary). He unearthed an old ( 1757) Persian manuscript describing battles of Nader Shah with the Afghanis.
Here are couple of illustrations: some fighters carry typical Persian Shamshirs with hand guards, but some carry clearly guardless sabers. I cannot be certain whether the latter belonged to both sides or only to one of them. I may only cautiously assume that to both, based on head covers: helmets vs. white turbans.

Gavin Nugent · 24th June 2020, 03:31 PM

From another post Ariel.

Quote:

Originally Posted by Kurt

Hi ,

I'm sure this sword comes from Algeria.
See:
Splendeur thes arms Orientales.
Figure 62
Kurt

I can't reference it, I lent it and others out just last night!!!

This is the thread to lead down rabbit warrens... Ex Hales, seen on page 218, similar seen on page 228 but none exactly of the ilk as yours...

http://www.vikingsword.com/vb/showth...light=judicial

ariel · 24th June 2020, 05:59 PM

Gavin, thanks a lot!
I checked both references, - both correct.

Funny, but I had a mental picture from Splendeurs and somehow connected it to the Elgood’s book.

Hope I never have to serve as a witness in a court of law:-)

TVV · 24th June 2020, 06:12 PM

Here is a link to another thread with Algerian palas:

www.vikingsword.com/vb/showthread.php?t=12160

Looking at your sword Ariel, I believe it was entirely made in Afghanistan or Northern India. The blade as you pointed out has a ricasso and with the fullers it is closer to what we see on tulwars as opposed to Ottoman palas. The scabbard is also Afghan or Indian, same as the bolster on the hilt. The bird shaped pommel is intriguing but bird shaped pommels were used in many regions.

Whatever the case, it is a very nice and interesting sword.

ariel · 24th June 2020, 06:53 PM

Thanks a lot Teodor!

Yes, weapons travel, but a rational reason why on earth would Pashtuns copy a naval cutlas from North Africa escapes me. Obviously, they did: some “fashionista” Gilzai desperately wanted something different from a traditional Khyber:-)

ariel · 26th June 2020, 03:37 PM

Gavin’s mention of Hale’s book was very helpful.
For additional example from the same source see p. 222, #542: a rare Algerian kilij. Regretfully, no view of the entire blade and no dimensions. But: “ Algeria under the Ottoman rule produced these distinctive kilij made without a crosspiece”
Thus, my memory of Algerian attribution was correct, only the source was wrong. At least some neurons are still working...

But it seems to me that my example was unanimously attributed in toto to N. India/ Afghanistan.

Thanks to all of you for your help

24th June 2020, 01:38 PM	#1
ariel Member Join Date: Dec 2004 Location: Ann Arbor, MI Posts: 5,503	A bit... But this one is what Lebedynsky called a " pseudo-shashka" from one of the Central Asian Khanates. At the beginning of this thread I have casually mentioned Elgood's Greece book as a source of attribution. Memory failed me: I went through that book and could not find it, although I distinctly remember the image. I went through several books and could not find an attribution to Algiers. Gavin also supported the Algerean origin. Gavin, can you provide a reference, please? Meanwhile, the closest thing I could find is the very same book by Lebedynsky ( " Les Armes Orientales", p. 68). Both are guardless ( just like mine) and just as short ( compared to the handles) and are labeled as Ottoman, mixes of Pala blade with yataghan mounts (E) and Pala blade with Caucasian shashka mounts (F). Both scabbards are distinctly different, with suspension rings, whereas mine was carried tucked under the belt ( Khyber-like). Attached Images

24th June 2020, 02:00 PM	#2
ariel Member Join Date: Dec 2004 Location: Ann Arbor, MI Posts: 5,503	An interesting and important twist to the story was provided by Aleksej Kurochkin ( here participating as Mercenary). He unearthed an old ( 1757) Persian manuscript describing battles of Nader Shah with the Afghanis. Here are couple of illustrations: some fighters carry typical Persian Shamshirs with hand guards, but some carry clearly guardless sabers. I cannot be certain whether the latter belonged to both sides or only to one of them. I may only cautiously assume that to both, based on head covers: helmets vs. white turbans. Attached Images

24th June 2020, 05:59 PM	#4
ariel Member Join Date: Dec 2004 Location: Ann Arbor, MI Posts: 5,503	Gavin, thanks a lot! I checked both references, - both correct. Funny, but I had a mental picture from Splendeurs and somehow connected it to the Elgood’s book. Hope I never have to serve as a witness in a court of law:-)

24th June 2020, 06:12 PM	#5
TVV Member Join Date: Dec 2004 Location: Bay Area Posts: 1,624	Here is a link to another thread with Algerian palas: www.vikingsword.com/vb/showthread.php?t=12160 Looking at your sword Ariel, I believe it was entirely made in Afghanistan or Northern India. The blade as you pointed out has a ricasso and with the fullers it is closer to what we see on tulwars as opposed to Ottoman palas. The scabbard is also Afghan or Indian, same as the bolster on the hilt. The bird shaped pommel is intriguing but bird shaped pommels were used in many regions. Whatever the case, it is a very nice and interesting sword.

24th June 2020, 06:53 PM	#6
ariel Member Join Date: Dec 2004 Location: Ann Arbor, MI Posts: 5,503	Thanks a lot Teodor! Yes, weapons travel, but a rational reason why on earth would Pashtuns copy a naval cutlas from North Africa escapes me. Obviously, they did: some “fashionista” Gilzai desperately wanted something different from a traditional Khyber:-)

26th June 2020, 03:37 PM	#7
ariel Member Join Date: Dec 2004 Location: Ann Arbor, MI Posts: 5,503	Gavin’s mention of Hale’s book was very helpful. For additional example from the same source see p. 222, #542: a rare Algerian kilij. Regretfully, no view of the entire blade and no dimensions. But: “ Algeria under the Ottoman rule produced these distinctive kilij made without a crosspiece” Thus, my memory of Algerian attribution was correct, only the source was wrong. At least some neurons are still working... But it seems to me that my example was unanimously attributed in toto to N. India/ Afghanistan. Thanks to all of you for your help