An Italian Falchion

[corrado26]

Originally Posted by Victrix

If you consult Schneider’s Waffen im Schweizerischen Landesmuseum (1980) you may find what Z S stands for.

Is it really a "ZS" or eventually a "SZ" It depends on from which side you look at!

[Victrix]

Originally Posted by corrado26

Is it really a "ZS" or eventually a "SZ" It depends on from which side you look at!

Obviously

[AndreaFeraro89]

In my opinion is a north Italian storta, or coltella, I am 99% sure of this, pommel does not belong originally with the sword, the "classic" pommel for this tipe of sword is the one mounted in the example posted by @Cerjak.

About the guard, could be a local style, it seems that the "base" is the classic storta guard with added extra arms on the side.

Here you can see a storta made in Caino (near Brescia).

Also Decorations on the blade confirms that has been made in Italy.

Here you can find some additional infos about this tipology of sword.
https://www.hema-minsk2019.org/base_...ibition-part-3

About the SZ mark...yes could be an arsenal mark, considering this is a infantry weapon, very common and cheap. On the other hand there are many examples about initials of the maker in Italian blades.

Cheers
Giovanni

[Victrix]

Zeughaus Solothurn in Switzerland?

[CSinTX]

Originally Posted by AndreaFeraro89

In my opinion is a north Italian storta, or coltella, I am 99% sure of this, pommel does not belong originally with the sword, the "classic" pommel for this tipe of sword is the one mounted in the example posted by @Cerjak.

Here you can see a storta made in Caino (near Brescia).

Cheers
Giovanni

Welcome to the forum Giovanni and thank you for the information and link! Also, thanks for bringing up the pommel. I assumed it to not be original due to it not being the "classic" style. But then I started noticing that very few of these swords have guards that match up to the notch in the classic pommel. It seems that your example may actually be wearing the original guard that correctly matches the pommel? Perhaps all the other examples were "rearsenaled" in bulk in a like way? Similar to how 20th century infantry firearms were rearsenaled in mass after a war.

Do you have any thoughts on the grip of mine? It seems old to me.

Best,
Casey

[CSinTX]

A couple more just for comparison.

Czernys 2011

[CSinTX]

Czernys 2019

[AndreaFeraro89]

Originally Posted by CSinTX

Welcome to the forum Giovanni and thank you for the information and link! Also, thanks for bringing up the pommel. I assumed it to not be original due to it not being the "classic" style. But then I started noticing that very few of these swords have guards that match up to the notch in the classic pommel. It seems that your example may actually be wearing the original guard that correctly matches the pommel? Perhaps all the other examples were "rearsenaled" in bulk in a like way? Similar to how 20th century infantry firearms were rearsenaled in mass after a war.

Do you have any thoughts on the grip of mine? It seems old to me.

Best,
Casey

Thank you to the welcome! I have seen some styles of guards mounted in very similar blades, the pommel seems to have more regular style. You must consider that this sword where mass produced for infantrymen and sailors.

About your handle, I miss to say that, it seems the original, many swords have been disassembled to replace "poor" handles like this with iron wire covered ones. In my opinion a soldier sword like this would have a very simple handle like the one you have. There are another example with similar handle, I must find it!

[ulfberth]

The round pommel is Original and just a variation on this type of falchion, as you can see on this piscture of the antique arms museum in San Marino Italy and in various books.
kind regards
Ulfberth

Originally Posted by AndreaFeraro89

In my opinion is a north Italian storta, or coltella, I am 99% sure of this, pommel does not belong originally with the sword, the "classic" pommel for this tipe of sword is the one mounted in the example posted by @Cerjak.

About the guard, could be a local style, it seems that the "base" is the classic storta guard with added extra arms on the side.

Here you can see a storta made in Caino (near Brescia).

Also Decorations on the blade confirms that has been made in Italy.

Here you can find some additional infos about this tipology of sword.
https://www.hema-minsk2019.org/base_...ibition-part-3

About the SZ mark...yes could be an arsenal mark, considering this is a infantry weapon, very common and cheap. On the other hand there are many examples about initials of the maker in Italian blades.

Cheers
Giovanni

[AndreaFeraro89]

In the 99% of the original I have seen the pommel has flat sides, you can found very complex decorations and forms, but the geometry has that charateristic.

I am sorry but a round pommel makes me suspicious on this swords.
Too easy to take a rapier or a sidesword pommel and to complete a storta.

I have had chance to read old bills (XIX cent) of "restoration" of important arms and armour collection. You can not imagine how many pieces has been "completed" with old parts or ex-novo pieces.
My experience has made me very suspicious even to the books.


Just my two cents

Cheers
Giovanni

[ulfberth]

I understand, but the geometry or style of the hilts branches, wich is faceted returns in the pommel also faceted. One also needs learn how the see the difference between recent composits or working life assembly. In this period these items were not reglementary made , as you can see in the museum were they are showing the different variations.This is what my experience tells me , I have been collecting for more than 42 years.
kind regards
Ulfberth

[Victrix]

A wellknown German auction house had this interesting sword up for sale last year. It is marked AVODNES which is not familiar to me. Backwards it’s SENDOVA which might make more sense but no more familiar.