Indian Tegha Sword Stamp Inquiry

[bsingh2311]

I appreciate all of your comments on the sword. I am yet to hold this sword in person as it's being shipped to me as we speak. I'm curious to evaluate the marriage of the hilt and blade/tang to see if the 'masala' or mixture that holds it in place has age to it or if it seems new.

I know a lot of people had gems and small diamonds/gold put in the masala or mixture that holds the marriage of the hilt & blade/tang but as mentioned above, it's a possibility that the hilts were removed and doing so the small gems/diamonds along with them.

I shall post more pictures of the sword such as the spine once I receive it (which I think will take some time). But, for now I'm quite pleased with the overall looks of the sword. From the image the sword looks light, the hilt of decent measurements, it has what looks like the original silver koftigari on it, although the end/tail of the knuckle guard seems to be damaged, it adds character to the hilt.

Moreover, what metal do you guys think the sword was forged from? It looks a lot like watered steel to me?

Lastly, the sword would need a thorough cleaning. What would you guys recommend as good materials/practices for cleaning or getting the blade's pattern to be more apparent?

As always, I appreciate your time and effort in replying to my thread.

[Jens Nordlunde]

Looking forward to see some more pictures, but please remove some of the background, so we dont have to scroll to read your text.

[Nihl]

Originally Posted by bsingh2311

What metal do you guys think the sword was forged from? It looks a lot like watered steel to me?

Lastly, the sword would need a thorough cleaning. What would you guys recommend as good materials/practices for cleaning or getting the blade's pattern to be more apparent?

Hey there bsingh,

What makes you think it is watered steel? The pictures you provide don't show the blade in any great detail, and even with the large picture it is hard to see much detail in the blade (other than oxidation, of course). Does the seller you bought this from describe it as being watered? I wouldn't trust the seller, personally, if the watering isn't clearly visible. Though of course at the same time it could be that the pattern has been obscured by polishing, but this is true of any blade that hasn't been etched (any blade could, in theory, be watered if you don't know what it's made out of or haven't etched it).

More likely than not it's just plain steel, or if the blade was forged late enough it could be more modern pattern welded "damascus" steel.

Cleaning-wise, lots of people have different methods. Some people use really fine steel wool, or fine grades of sandpaper or other abrasives, while other people use chemicals or natural remedies. Personally, I've found that simple lemon juice is quite effective; just apply it to oxidized areas, wait an hour or two for it to dry, clean it off, and then polish the area once the oxidation is removed to the preferred degree. I have to ask another question though: what makes you think it needs a thorough cleaning? From the picture you've shown, the hilt is in a pretty solid condition, with only minimal losses to the koftgari, and the blade appears cleaned/polished enough as is. What little oxidation is still on the blade appears to be at a level that most museums would find acceptable (though to be fair that isn't saying much). At most the blade might need some polishing & sharpening (optional), while the koftgari on the hilt might need to be brightened up (polished) if it has at all gotten dull.

In regards to etching the blade, there are plenty of threads on here that discuss the proper methods/materials that should be used to get any possible pattern in the steel more visible. Using the search feature is recommended .

[bsingh2311]

Originally Posted by Nihl

Hey there bsingh,

What makes you think it is watered steel? The pictures you provide don't show the blade in any great detail, and even with the large picture it is hard to see much detail in the blade (other than oxidation, of course). Does the seller you bought this from describe it as being watered? I wouldn't trust the seller, personally, if the watering isn't clearly visible. Though of course at the same time it could be that the pattern has been obscured by polishing, but this is true of any blade that hasn't been etched (any blade could, in theory, be watered if you don't know what it's made out of or haven't etched it).

More likely than not it's just plain steel, or if the blade was forged late enough it could be more modern pattern welded "damascus" steel.

Cleaning-wise, lots of people have different methods. Some people use really fine steel wool, or fine grades of sandpaper or other abrasives, while other people use chemicals or natural remedies. Personally, I've found that simple lemon juice is quite effective; just apply it to oxidized areas, wait an hour or two for it to dry, clean it off, and then polish the area once the oxidation is removed to the preferred degree. I have to ask another question though: what makes you think it needs a thorough cleaning? From the picture you've shown, the hilt is in a pretty solid condition, with only minimal losses to the koftgari, and the blade appears cleaned/polished enough as is. What little oxidation is still on the blade appears to be at a level that most museums would find acceptable (though to be fair that isn't saying much). At most the blade might need some polishing & sharpening (optional), while the koftgari on the hilt might need to be brightened up (polished) if it has at all gotten dull.

In regards to etching the blade, there are plenty of threads on here that discuss the proper methods/materials that should be used to get any possible pattern in the steel more visible. Using the search feature is recommended .

The seller didn't mention the metal, I assumed it from zooming into the images and seeing a light pattern which you highlighted would need etching for the pattern to become more apparent. I appreciate your reply, I'll be trying the lemon method to try and remove the pitting on the blade.

[bsingh2311]

Cobra Hilt Tegha.

[bsingh2311]

In-person analysis of Tegha sword:

Hilt:

Silver Inlay/Koftigari:
85-90% of the original silver inlay (Koftigari) is still intact on the hilt. You can tell the koftigari was applied in very generously, the pattern is very thick and shows the royalty and power of the original owner of the sword.

In addition, you can tell the koftigari took a long time as it covers the entirety of the hilt.

Hilt Design:
The bottom disk of the hilt is manufactured to have a slight upwards position which would delegate how the swords would have been used. I also noticed a very rare cobra on the end of the knuckle guard - this must've been the first Indian sword hilt I've ever seen with such a hilt.

Hilt marriage with sword:
Upon inspection I'm pretty confident that the marriage between the sword and hilt were never "broken" as the "glue" or masala looks to be made from the same ingredients they were made back in the 19th Century. Plus, the blade is precisely in the centre of the hilt.

Sword:
The sword has the typical Indian Ricasso which actually helps with wielding the sword as it's not uncommon for the index finger to be rested on the bottom area of the ricasso.

The blade shows very little pitting. I can't put my finger on the material as of yet as I will be conducting a small restoration project in which one of the items on the list will be to etch the blade to see if there may be a pattern hiding under the polish.

Furthermore, the blade has a beautiful polished shine to it and is lightweight!

Stamp:
As other members of this forum have highlighted, the "Quality Stamp" on the blade located at the end of the ricasso is deeply inlaid. This would fortify the argument that the stamp was indeed put on the blade when it was still very hot.