opinions on my kerises

nechesh · 22nd January 2005, 05:50 AM

Well, i've seen a lot of it on blades made for tourist trade, but this blade does not appear to be one of those to me, in which case i will say that i do find it somewhat uncommon. Does the writing appear to be made of pamor material or perhaps silver?

casey · 22nd January 2005, 06:06 AM

Hard to say Nechesh it does seem a little different to normal pamor but I wouldn,t call it either way it needs to be cleaned to get a better idea.I have been reading some other threads and would like to know if soaking these blades in vinager would be a good start? Any suggestions.

nechesh · 22nd January 2005, 06:16 AM

I would use a good fruit acid. Personally i have used pineapple juice. Wash the blade thoughly with distilled water and a gentle dish detergent to remove dirt and oils. A tooth brush comes in real handy for scrubbing. You may need to soak it for a few days to remove any rust, brushing it down a couple of times a day. Depends how much rust there is. Here's a good thread on the subject:
http://www.vikingsword.com/ubb/Forum1/HTML/000717.html
It late here in the States so we can pick this up later if you respond.

casey · 22nd January 2005, 06:22 AM

Look forward to it Nechesh Iwill check out the thread and possibly get to work on them. Case

Henk · 22nd January 2005, 08:52 AM

Nechesh is right about the writing on this keris. It is not uncommon. I only doubt, but it is hard to see on these pictures if it is Islamatic writing. It also could be writng in the old Indonesian language. I cann't remember the name for that language anymore. You can also clean the blade with lime juice. Maybe you can find somebody who can bring up the pamor for you again with arsenic to restore the blade completely.

Sang Keris · 23rd January 2005, 01:44 AM

well , that's absolutely arabic....

after you clean it and put it in arsenicum ,

those letter will show up clearly ,like the one i got ( pic attached )

Henk · 23rd January 2005, 02:46 PM

Sang keris,
Yours is arab writing, but Casey's one could be the old Indonesian writing. He should stick it in the arsenic as well. I do own a keris with writing in that old Indonesian writing and Casey's pictures are not clear enough to tell that with 100% certainty.

23rd January 2005, 01:44 AM	#6
Sang Keris Member Join Date: Jan 2005 Location: Indonesia Posts: 46	well , that's absolutely arabic.... after you clean it and put it in arsenicum , those letter will show up clearly ,like the one i got ( pic attached ) Attached Images

22nd January 2005, 05:50 AM	#1
nechesh Member Join Date: Dec 2004 Location: Cincinnati, OH Posts: 940	Well, i've seen a lot of it on blades made for tourist trade, but this blade does not appear to be one of those to me, in which case i will say that i do find it somewhat uncommon. Does the writing appear to be made of pamor material or perhaps silver?

22nd January 2005, 06:06 AM	#2
casey Member Join Date: Dec 2004 Location: australia Posts: 13	Hard to say Nechesh it does seem a little different to normal pamor but I wouldn,t call it either way it needs to be cleaned to get a better idea.I have been reading some other threads and would like to know if soaking these blades in vinager would be a good start? Any suggestions.

22nd January 2005, 06:16 AM	#3
nechesh Member Join Date: Dec 2004 Location: Cincinnati, OH Posts: 940	I would use a good fruit acid. Personally i have used pineapple juice. Wash the blade thoughly with distilled water and a gentle dish detergent to remove dirt and oils. A tooth brush comes in real handy for scrubbing. You may need to soak it for a few days to remove any rust, brushing it down a couple of times a day. Depends how much rust there is. Here's a good thread on the subject: http://www.vikingsword.com/ubb/Forum1/HTML/000717.html It late here in the States so we can pick this up later if you respond.

22nd January 2005, 06:22 AM	#4
casey Member Join Date: Dec 2004 Location: australia Posts: 13	Look forward to it Nechesh Iwill check out the thread and possibly get to work on them. Case

22nd January 2005, 08:52 AM	#5
Henk Member Join Date: Dec 2004 Location: The Netherlands Posts: 1,209	Nechesh is right about the writing on this keris. It is not uncommon. I only doubt, but it is hard to see on these pictures if it is Islamatic writing. It also could be writng in the old Indonesian language. I cann't remember the name for that language anymore. You can also clean the blade with lime juice. Maybe you can find somebody who can bring up the pamor for you again with arsenic to restore the blade completely.

23rd January 2005, 02:46 PM	#7
Henk Member Join Date: Dec 2004 Location: The Netherlands Posts: 1,209	Sang keris, Yours is arab writing, but Casey's one could be the old Indonesian writing. He should stick it in the arsenic as well. I do own a keris with writing in that old Indonesian writing and Casey's pictures are not clear enough to tell that with 100% certainty.