Old Omani Saif

TVV · 1st October 2017, 06:47 PM

Thank you for your responses.

Iain,

Yes, the fuller is unusual, not sure what that would signify though.

Ibrahiim,

Your passion about ethnographic arms is admirable and overall an asset to this forum. I am well aware of your hypothesis about Omani swords - after all, the whole discussion started in a 12-page thread for a sword I posted years ago. I am sure you are also aware that I am among the many members here who simply find that hypothesis factually incorrect. I do not expect you to change your position, but you should also understand that posting the same hypothesis over and over and over again will not make it true or make us accept it. Based on that, I will ask that we avoid the topic of your theory about the "battle" and "dance" swords here, as doing so will be entirely unproductive at this point.

Back to the subject of the sword in hand: everything is possible, including a marriage of hilt and blade. I am sure that there is such a practice in Oman, and to deny so would be naïve. The blade is of a shape that fits the older Omani sword shape and not much else. Are you aware of any Indian, Persian or Central Asian swords that have short wide thin wootz blades that fit the measurements I gave above, because I cannot? The fact that it is made of wootz is also important in another manner. The crucible steel technology has been recreated in modern times, thanks to the effort of researchers and bladesmiths, some of whom are members here. Based on what I have seen, just knowing how to replicate the process does not make producing crucible steel easy or cheap, however. So in the worst possible case, this could be a marriage of an old hilt with an old blade from another Omani sword, though the pitch inside the hilt looks to have some age and the blade width fits the sword perfectly.

Regards,
Teodor

Ibrahiim al Balooshi · 1st October 2017, 09:46 PM

Quote:

Originally Posted by TVV

Thank you for your responses.

Iain,

Yes, the fuller is unusual, not sure what that would signify though.

Ibrahiim,

Your passion about ethnographic arms is admirable and overall an asset to this forum. I am well aware of your hypothesis about Omani swords - after all, the whole discussion started in a 12-page thread for a sword I posted years ago. I am sure you are also aware that I am among the many members here who simply find that hypothesis factually incorrect. I do not expect you to change your position, but you should also understand that posting the same hypothesis over and over and over again will not make it true or make us accept it. Based on that, I will ask that we avoid the topic of your theory about the "battle" and "dance" swords here, as doing so will be entirely unproductive at this point.

Back to the subject of the sword in hand: everything is possible, including a marriage of hilt and blade. I am sure that there is such a practice in Oman, and to deny so would be naïve. The blade is of a shape that fits the older Omani sword shape and not much else. Are you aware of any Indian, Persian or Central Asian swords that have short wide thin wootz blades that fit the measurements I gave above, because I cannot? The fact that it is made of wootz is also important in another manner. The crucible steel technology has been recreated in modern times, thanks to the effort of researchers and bladesmiths, some of whom are members here. Based on what I have seen, just knowing how to replicate the process does not make producing crucible steel easy or cheap, however. So in the worst possible case, this could be a marriage of an old hilt with an old blade from another Omani sword, though the pitch inside the hilt looks to have some age and the blade width fits the sword perfectly.

Regards,
Teodor

Whatever you think about threads gone by and my place in Forum it remains a free place to comment on the discussion of items and thus I have exercised that right. I find it obscure to present a sword but to expect to launch with it spurious details about other swords under that umbrella. It simply isn't right. Your comment about price and Solingen blades is incorrect and unrelated to topic nor should you expect to try that on unchecked. Why expect it to be inoculated against rebuke.

No evidence exists to support your point about cheaper blades..Solingen did not make Omani dancing blades and the curved sword with the same hilt has an entirely different provenance. In one paragraph you cannot expect a trashing of half of the swords of Oman just to pass quietly and without comment...That is not how Forum works. However, if you think you are right, please make the case. It's a Forum.

What I suspect you have here is something like a 16th C /17thC Hilt with a recent replacement blade. Examination of the material holding the blade firm is extremely difficult to guage when the blade was fitted...Actually these swords have no glue or tar as the blade is held in place by two rivets through a hexagonal two piece metal tube and a wooden core and through the tang...unlike Khanjars blades which are glued/tar fixed.

These blades are not usually thin... They are normally thicker and stiff ...There is normally about an inch of flexibility only as these were chopping weapons. If you can disclose where you got the sword I will be closer to knowing who did the blade fit up. That can be done by PM or stick it on the thread.

TVV · 1st October 2017, 10:33 PM

Ibrahiim,

I am not going to get dragged into a pointless debate about your theory which contradicts all the period accounts, drawings and existent examples of Omani swords.

If you are trying to imply that a master bladesmith of Rick Furrer's ability is making kattara blades to fit to old hilts, you are seriously risking losing whatever credibility left you have here, with me at least. I am afraid I am reaching the point where I will be forced to simply start ignoring your posts as spam.

Teodor

Ibrahiim al Balooshi · 2nd October 2017, 12:02 AM

Quote:

Originally Posted by TVV

Ibrahiim,

I am not going to get dragged into a pointless debate about your theory which contradicts all the period accounts, drawings and existent examples of Omani swords.

If you are trying to imply that a master bladesmith of Rick Furrer's ability is making kattara blades to fit to old hilts, you are seriously risking losing whatever credibility left you have here, with me at least. I am afraid I am reaching the point where I will be forced to simply start ignoring your posts as spam.

Teodor

Where did I say that? I am very much aware of who is making what blades in the market and that is why I suggested the information... I never mentioned any names whatsoever...The person you name is highly respected . Your remark is nonsensical...and insulting. My remarks are based on solid hands-on research of over 30 years where I assure you I have handled hundreds of Omani swords...which simply reinforce my viewpoint despite the baseless nonsense you place at this thread...Kattara blades? I think you have that slightly wrong... Straight blades are Sayf. Your descriptive "Kattara" are curved.

Kubur · 2nd October 2017, 07:32 AM

Quote:

Originally Posted by TVV

Ibrahiim,

I am not going to get dragged into a pointless debate about your theory which contradicts all the period accounts, drawings and existent examples of Omani swords.

If you are trying to imply that a master bladesmith of Rick Furrer's ability is making kattara blades to fit to old hilts, you are seriously risking losing whatever credibility left you have here, with me at least. I am afraid I am reaching the point where I will be forced to simply start ignoring your posts as spam.

Teodor

Sorry Ibrahim, but I support Teodor. He absolutely right and I myself stopped to read these posts on Omani and nimcha things since a long time.

ariel · 2nd October 2017, 10:12 AM

The handle sports new rivets. The implications are obvious.

Re- use of parts is virtually expected in case of old “Oriental” swords: they utilized parts of organic nature. But wood shrinks or rots, mastique dries and crumbles, bone cracks and breaks.

I do not think it might be possible to pinpoint the age of restoration of this sword short of full disassembling it . But the good thing is that all components look very old.

A.alnakkas · 2nd October 2017, 11:23 AM

Quote:

Originally Posted by ariel

The handle sports new rivets. The implications are obvious.

Re- use of parts is virtually expected in case of old “Oriental” swords: they utilized parts of organic nature. But wood shrinks or rots, mastique dries and crumbles, bone cracks and breaks.

I do not think it might be possible to pinpoint the age of restoration of this sword short of full disassembling it . But the good thing is that all components look very old.

As mentioned, these are still valued in Oman and go through many restorations and even are fitted with new silver parts to sort of make them presentation worthy. The rivets while in appearance seem 'new' are not negative indications.

I have no information about how old is the blade, the wootz is clear and the condition does not suggest a newly made blade. Nor does a mismatched patina between handle and blade suggest much... how many shamshirs are there with excellent polished blades and pitted quillons? we all know why.

Teodor, nice sword! it is called saif Yamani and saif Ya'rubi as well by Omanis in an effort to try to pinpoint its origin.

TVV · 2nd October 2017, 05:21 PM

Thank you Lotfi,

Is the Saif Ya'Rubi name based on the Ya-Rubi dynasty?

Teodor

Jim McDougall · 2nd October 2017, 06:04 PM

The swords of Arabia have always intrigued me, particularly as I began to learn more on their place in the complex history and development of sword types, as well as in the web of trade blade movement.
In the many years I have studied swords' history, it was only in probably the past decade that I began to better understand, actually more in beginning to recognize the pieces in a complicated jig saw puzzle.

Like Teodor, I always wanted one of these old Omani swords, and had since seeing them in Elgood's book on Arabian arms years ago. When I finally acquired am Omani sa'f (the form known colloquially as 'kattara') I was delighted, and it was at a time over 20 years ago when these were rarely seen available. I felt I had achieved a sort of 'milestone' in just having an example.

It was not until a number of years ago that I met Ibrahiim here, and must admit that at first I was reticent to accept some of the information and detail he was proposing on these Omani swords. After a time I realized what he was revealing was soundly field researched as he is of course situated in the very regions these weapons have been used, and unfortunately, as often the case in ethnographic arms, being 'commercially' crafted.

I was also impressed by the comprehensive research he tenaciously had applied in learning more historically on how and why these weapons were developed. There was remarkably present, the kind of dynastic volatility and use of weaponry in regalia and ceremony which has in so many cases called for dramatic establishment of legitimacy in changes in rule.

Our discussions here have afforded us incredible opportunity to examine and present evidence toward the understanding of the history and development of the many weapon forms which have remained simply this or that in books and cataloques, without any dimension for far too many years.

We have achieved more than was ever even imaginable over these past two decades here, and advanced knowledge on so many arms forms and topics.

That is the focus, and we absolutely must give up the false notion of 'debate' and personal conflict for the positive and constructive value of discussion..that is presenting observations and evidence for consideration.

We have everything to gain, and too much to lose wasting time with debates (well described as 'pointless' ) and the opportunity to learn together as we have always done here.

1st October 2017, 10:33 PM	#3
TVV Member Join Date: Dec 2004 Location: Bay Area Posts: 1,664	Ibrahiim, I am not going to get dragged into a pointless debate about your theory which contradicts all the period accounts, drawings and existent examples of Omani swords. If you are trying to imply that a master bladesmith of Rick Furrer's ability is making kattara blades to fit to old hilts, you are seriously risking losing whatever credibility left you have here, with me at least. I am afraid I am reaching the point where I will be forced to simply start ignoring your posts as spam. Teodor Last edited by TVV; 1st October 2017 at 10:56 PM.

1st October 2017, 06:47 PM	#1
TVV Member Join Date: Dec 2004 Location: Bay Area Posts: 1,664	Thank you for your responses. Iain, Yes, the fuller is unusual, not sure what that would signify though. Ibrahiim, Your passion about ethnographic arms is admirable and overall an asset to this forum. I am well aware of your hypothesis about Omani swords - after all, the whole discussion started in a 12-page thread for a sword I posted years ago. I am sure you are also aware that I am among the many members here who simply find that hypothesis factually incorrect. I do not expect you to change your position, but you should also understand that posting the same hypothesis over and over and over again will not make it true or make us accept it. Based on that, I will ask that we avoid the topic of your theory about the "battle" and "dance" swords here, as doing so will be entirely unproductive at this point. Back to the subject of the sword in hand: everything is possible, including a marriage of hilt and blade. I am sure that there is such a practice in Oman, and to deny so would be naïve. The blade is of a shape that fits the older Omani sword shape and not much else. Are you aware of any Indian, Persian or Central Asian swords that have short wide thin wootz blades that fit the measurements I gave above, because I cannot? The fact that it is made of wootz is also important in another manner. The crucible steel technology has been recreated in modern times, thanks to the effort of researchers and bladesmiths, some of whom are members here. Based on what I have seen, just knowing how to replicate the process does not make producing crucible steel easy or cheap, however. So in the worst possible case, this could be a marriage of an old hilt with an old blade from another Omani sword, though the pitch inside the hilt looks to have some age and the blade width fits the sword perfectly. Regards, Teodor

2nd October 2017, 10:12 AM	#6
ariel Member Join Date: Dec 2004 Location: Ann Arbor, MI Posts: 5,503	The handle sports new rivets. The implications are obvious. Re- use of parts is virtually expected in case of old “Oriental” swords: they utilized parts of organic nature. But wood shrinks or rots, mastique dries and crumbles, bone cracks and breaks. I do not think it might be possible to pinpoint the age of restoration of this sword short of full disassembling it . But the good thing is that all components look very old.

2nd October 2017, 05:21 PM	#8
TVV Member Join Date: Dec 2004 Location: Bay Area Posts: 1,664	Thank you Lotfi, Is the Saif Ya'Rubi name based on the Ya-Rubi dynasty? Teodor

2nd October 2017, 06:04 PM	#9
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 10,281	The swords of Arabia have always intrigued me, particularly as I began to learn more on their place in the complex history and development of sword types, as well as in the web of trade blade movement. In the many years I have studied swords' history, it was only in probably the past decade that I began to better understand, actually more in beginning to recognize the pieces in a complicated jig saw puzzle. Like Teodor, I always wanted one of these old Omani swords, and had since seeing them in Elgood's book on Arabian arms years ago. When I finally acquired am Omani sa'f (the form known colloquially as 'kattara') I was delighted, and it was at a time over 20 years ago when these were rarely seen available. I felt I had achieved a sort of 'milestone' in just having an example. It was not until a number of years ago that I met Ibrahiim here, and must admit that at first I was reticent to accept some of the information and detail he was proposing on these Omani swords. After a time I realized what he was revealing was soundly field researched as he is of course situated in the very regions these weapons have been used, and unfortunately, as often the case in ethnographic arms, being 'commercially' crafted. I was also impressed by the comprehensive research he tenaciously had applied in learning more historically on how and why these weapons were developed. There was remarkably present, the kind of dynastic volatility and use of weaponry in regalia and ceremony which has in so many cases called for dramatic establishment of legitimacy in changes in rule. Our discussions here have afforded us incredible opportunity to examine and present evidence toward the understanding of the history and development of the many weapon forms which have remained simply this or that in books and cataloques, without any dimension for far too many years. We have achieved more than was ever even imaginable over these past two decades here, and advanced knowledge on so many arms forms and topics. That is the focus, and we absolutely must give up the false notion of 'debate' and personal conflict for the positive and constructive value of discussion..that is presenting observations and evidence for consideration. We have everything to gain, and too much to lose wasting time with debates (well described as 'pointless' ) and the opportunity to learn together as we have always done here.