Tjikeroeh swords

DaveA · 14th April 2017, 10:04 AM

Here is a golok from the village of Tjikeroeh in Java, Indonesia, c. late 19th - early 20th century. The overall length is 20 ½ inches. The blade length is 15 inches. The edge is recurved in shape, with a "fat belly" at the point of maximum percussion. A single large fuller is found on both sides of the blade along the spine. The fuller is decorated in an okir pattern typical of swords from Tjikeroeh and neighboring villages. The back side of the blade is slightly concave in shape with a width of ¼ inch tapering distally to the point. The blade edge smoothly curves upward to the point and the back slopes down in nearly a straight line to the point. The hilt is carved hardwood in a typical design that is representative of a parrot. There are glue indications of a relatively recent repair to the hilt. The scabbard wood is slightly different indicating that it is a replacement for the original (if any).

More pictures at http://atkinson-swords.com/collectio...ok-tjikeroeh1/

DaveA · 14th April 2017, 10:11 AM

Here is an interesting example of golok sword made in the village of Tjikeroeh, Java, during Dutch Colonial times (1888 − 1920). The shape of blade is typical of Java. The guard however is probably based on Dutch hunting sword models. Nevertheless, it is not a copy of a European sword. This one, like the others of the period, are artistic interpretations that are impressed with unique Javanese design attributes. The hilt, of bone, features brass ornamentation at foot and toe with a threaded nut securing the full tang blade. The guard, also of brass, features a single rounded acorn finial and a brass clamshell, typical of European swords in this period. The style of this hilt is borrowed from Hirschfanger. The total length is 41cm, the blade alone is 29cm long. The scabbard is of leather over wood and relatively unusual.

More pictures at: http://atkinson-swords.com/collectio...ok-tjikeroeh2/

DaveA · 14th April 2017, 10:21 AM

This is a heavy golok from the West Java village of Tjipatjing. It was likely made special order for a foreigner, probably a Dutch worker or soldier, who was living in what was at the time a Dutch colony. The hilt is made of bone with flat steel disk-shaped pommel that is secured by the tang with typical flattened end. The hilt including guard is 5 ⅜ inches long. The s-shaped guard, also steel, is 3 ⅛ inches wide with opposite facing quillons. The blade measures 17 inches in length along the center line. The blade is evenly 1 ¼ inch wide prior to the tip which is a drop point, having an equal convex curvature of the back and edge towards the point. There is an unsharpened false back edge. The style of this hilt is borrowed from Hirschfanger.

The thickness has a slight distal taper from ¼ inch at the base to ⅛ inch prior to the tip, measured along the top of the blade. A large fuller with okir-style engraving is found on both sides of the blade, each measuring 14 ½ inches. A second, thin fuller is found between the large one and the back edge on both sides.

The name of the hamlet where this sword was created is enscribed on one side of the blade, "Tjipatjing" along with the year, 1904.

More pictures at: http://atkinson-swords.com/collectio...al-tjipatjing/

DaveA · 14th April 2017, 10:31 AM

This is a klewang with a European-style grip and a clamshell langet on the front of the cross guard. A klewang blade is somewhat unusual to find from this era c. 1910. The hilt is made of antler with brass pommel and finishings and is 6 inches in length (excluding clamshell). The s-shaped guard, also brass, is 4 ¾ inches wide with rounded "acorn" finials. The blade measures 21 ¼ inches in length along the bottom, 19 ½ inches along the top. Typical of klewangs, the blade broadens from 1 ⅜ inches wide at the base to 2 inches at the tip. The thickness has a slight distal taper from ¼ inch at the base to ⅜ inch at tip, measured along the top of the blade. A large fuller with okir-style engraving is found on both sides of the blade, each measuring 13 inches. The name of the hamlet where this sword was created is enscribed on one side of the blade, "Tjicatjing" along with the year, 1910.

More pictures at: http://atkinson-swords.com/collectio...onial-klewang/

gp · 18th November 2021, 07:27 PM

chikeru / tjikeroeh....

I do see quite a lot of threads from 2005 to 2015
some interesting, some guessing and some well...

just managed to lay my hands on 2 of them: a small and a big one
First I was advised on literature:

Keris Jawa (Haryoguritno) de Kris I, (Tammens), Traditional weapons from the Indonesian Archipelago (van Zonneveld), Keris Indonesia, Keris Bali (Neka) en Tafsir Keris (Bpk Junus)

Tjikeroeh ( since 1972 Cikeruh in modern Bahasa Indonesia) is a dessa east of Bandung, Java where around the turn of the 20th century in the period between 1890 to 1920 production of weapons took place ,specially cold weapons.
Tjikeroeh at that time, just like Ttjipatjing (Cipacin) which is closeby, famous for its production of, not only local but also western European arms like sabers, knives and daggers.
A huge misunderstanding is the fact that they only produced for local KNIL ( Dutch Indies Army) or as substitute for local Dutch residents working for the railraod, government or even tourists.
A huge varity from working knives like simple bado to a fancy golok, parang, european klewang and (bowie-like) knives and dagger, with handles from bone, horn or wood.
Scabbard mostly (dark) wood, sometimes with copper, nicely decorated and place of manufatoring and date engraved. ( Tjikeroeh or variances like TJKRH, TJIKE, TJIKR, TJKR)

Regardless the “export nature” many were very good sword, due to the use of spring steel !

gp · 18th November 2021, 07:34 PM

hereby my small one, a so called hartsvanger or Hirschfänger

Totale length 26.5 cm incl scabbard
knife 23.5 cm
blade 14.5 cm lang 2 cm wide
grip 9.5 cm
ferrule 1.5cm pommel 1.5 cm
bone grip 6 cm copper crossguard 6 cm
scallop shell 3 cm 1.3 narrow
locket 1 cm

gp · 18th November 2021, 07:35 PM

some more

14th April 2017, 10:04 AM	#1
DaveA Member Join Date: Apr 2007 Location: Wisconsin, USA Posts: 415	Golok from the village of Tjikeroeh Here is a golok from the village of Tjikeroeh in Java, Indonesia, c. late 19th - early 20th century. The overall length is 20 ½ inches. The blade length is 15 inches. The edge is recurved in shape, with a "fat belly" at the point of maximum percussion. A single large fuller is found on both sides of the blade along the spine. The fuller is decorated in an okir pattern typical of swords from Tjikeroeh and neighboring villages. The back side of the blade is slightly concave in shape with a width of ¼ inch tapering distally to the point. The blade edge smoothly curves upward to the point and the back slopes down in nearly a straight line to the point. The hilt is carved hardwood in a typical design that is representative of a parrot. There are glue indications of a relatively recent repair to the hilt. The scabbard wood is slightly different indicating that it is a replacement for the original (if any). More pictures at http://atkinson-swords.com/collectio...ok-tjikeroeh1/ Attached Images

14th April 2017, 10:11 AM	#2
DaveA Member Join Date: Apr 2007 Location: Wisconsin, USA Posts: 415	Golok Tjikeroeh Hybrid Here is an interesting example of golok sword made in the village of Tjikeroeh, Java, during Dutch Colonial times (1888 − 1920). The shape of blade is typical of Java. The guard however is probably based on Dutch hunting sword models. Nevertheless, it is not a copy of a European sword. This one, like the others of the period, are artistic interpretations that are impressed with unique Javanese design attributes. The hilt, of bone, features brass ornamentation at foot and toe with a threaded nut securing the full tang blade. The guard, also of brass, features a single rounded acorn finial and a brass clamshell, typical of European swords in this period. The style of this hilt is borrowed from Hirschfanger. The total length is 41cm, the blade alone is 29cm long. The scabbard is of leather over wood and relatively unusual. More pictures at: http://atkinson-swords.com/collectio...ok-tjikeroeh2/ Attached Images

14th April 2017, 10:21 AM	#3
DaveA Member Join Date: Apr 2007 Location: Wisconsin, USA Posts: 415	Golok from Tjipatjing This is a heavy golok from the West Java village of Tjipatjing. It was likely made special order for a foreigner, probably a Dutch worker or soldier, who was living in what was at the time a Dutch colony. The hilt is made of bone with flat steel disk-shaped pommel that is secured by the tang with typical flattened end. The hilt including guard is 5 ⅜ inches long. The s-shaped guard, also steel, is 3 ⅛ inches wide with opposite facing quillons. The blade measures 17 inches in length along the center line. The blade is evenly 1 ¼ inch wide prior to the tip which is a drop point, having an equal convex curvature of the back and edge towards the point. There is an unsharpened false back edge. The style of this hilt is borrowed from Hirschfanger. The thickness has a slight distal taper from ¼ inch at the base to ⅛ inch prior to the tip, measured along the top of the blade. A large fuller with okir-style engraving is found on both sides of the blade, each measuring 14 ½ inches. A second, thin fuller is found between the large one and the back edge on both sides. The name of the hamlet where this sword was created is enscribed on one side of the blade, "Tjipatjing" along with the year, 1904. More pictures at: http://atkinson-swords.com/collectio...al-tjipatjing/ Attached Images

14th April 2017, 10:31 AM	#4
DaveA Member Join Date: Apr 2007 Location: Wisconsin, USA Posts: 415	Klewang from Tjicatjing This is a klewang with a European-style grip and a clamshell langet on the front of the cross guard. A klewang blade is somewhat unusual to find from this era c. 1910. The hilt is made of antler with brass pommel and finishings and is 6 inches in length (excluding clamshell). The s-shaped guard, also brass, is 4 ¾ inches wide with rounded "acorn" finials. The blade measures 21 ¼ inches in length along the bottom, 19 ½ inches along the top. Typical of klewangs, the blade broadens from 1 ⅜ inches wide at the base to 2 inches at the tip. The thickness has a slight distal taper from ¼ inch at the base to ⅜ inch at tip, measured along the top of the blade. A large fuller with okir-style engraving is found on both sides of the blade, each measuring 13 inches. The name of the hamlet where this sword was created is enscribed on one side of the blade, "Tjicatjing" along with the year, 1910. More pictures at: http://atkinson-swords.com/collectio...onial-klewang/ Attached Images

18th November 2021, 07:27 PM	#5
gp Member Join Date: May 2020 Posts: 823	chikeru / tjikeroeh.... I do see quite a lot of threads from 2005 to 2015 some interesting, some guessing and some well... just managed to lay my hands on 2 of them: a small and a big one First I was advised on literature: Keris Jawa (Haryoguritno) de Kris I, (Tammens), Traditional weapons from the Indonesian Archipelago (van Zonneveld), Keris Indonesia, Keris Bali (Neka) en Tafsir Keris (Bpk Junus) Tjikeroeh ( since 1972 Cikeruh in modern Bahasa Indonesia) is a dessa east of Bandung, Java where around the turn of the 20th century in the period between 1890 to 1920 production of weapons took place ,specially cold weapons. Tjikeroeh at that time, just like Ttjipatjing (Cipacin) which is closeby, famous for its production of, not only local but also western European arms like sabers, knives and daggers. A huge misunderstanding is the fact that they only produced for local KNIL ( Dutch Indies Army) or as substitute for local Dutch residents working for the railraod, government or even tourists. A huge varity from working knives like simple bado to a fancy golok, parang, european klewang and (bowie-like) knives and dagger, with handles from bone, horn or wood. Scabbard mostly (dark) wood, sometimes with copper, nicely decorated and place of manufatoring and date engraved. ( Tjikeroeh or variances like TJKRH, TJIKE, TJIKR, TJKR) Regardless the “export nature” many were very good sword, due to the use of spring steel ! Attached Images Last edited by gp; 18th November 2021 at 07:49 PM.

18th November 2021, 07:34 PM	#6
gp Member Join Date: May 2020 Posts: 823	hereby my small one, a so called hartsvanger or Hirschfänger Totale length 26.5 cm incl scabbard knife 23.5 cm blade 14.5 cm lang 2 cm wide grip 9.5 cm ferrule 1.5cm pommel 1.5 cm bone grip 6 cm copper crossguard 6 cm scallop shell 3 cm 1.3 narrow locket 1 cm Attached Images

18th November 2021, 07:35 PM	#7
gp Member Join Date: May 2020 Posts: 823	some more Attached Images