ALGERIAN MIQULET FOR COMMENT

rickystl · 17th December 2016, 06:46 PM

Hi Rajesh.

Thanks for the additional photos. It looks like a nice piece, that should clean up well with a little work.
After looking further, it does appear Fernando K is correct. It seems a tiny piece of the brass covered support plate, just in front of the screw, is broke. But the mainspring does not rest on this piece. It rests on the toe of the hammer. See photo below. The mainspring does not "appear" to be broke. Possibly someone was trying to do some type of repair, but did not really know what they are doing (?) Hopefully, there is a gunsmith in your area that is familiar with the early guns/locks. You would be surprised at how many modern gunsmiths are not. If you can't locate one, send me a PM.

Rick

rickystl · 17th December 2016, 06:48 PM

Woops. Forgot to post the photo.

17th December 2016, 06:48 PM	#2
rickystl Member Join Date: Jul 2010 Location: St. Louis, MO area. Posts: 1,632	Woops. Forgot to post the photo. Attached Images

17th December 2016, 06:46 PM	#1
rickystl Member Join Date: Jul 2010 Location: St. Louis, MO area. Posts: 1,632	Hi Rajesh. Thanks for the additional photos. It looks like a nice piece, that should clean up well with a little work. After looking further, it does appear Fernando K is correct. It seems a tiny piece of the brass covered support plate, just in front of the screw, is broke. But the mainspring does not rest on this piece. It rests on the toe of the hammer. See photo below. The mainspring does not "appear" to be broke. Possibly someone was trying to do some type of repair, but did not really know what they are doing (?) Hopefully, there is a gunsmith in your area that is familiar with the early guns/locks. You would be surprised at how many modern gunsmiths are not. If you can't locate one, send me a PM. Rick