Antique Chinese QiJia Saber

[mariusgmioc]

Originally Posted by josh stout

It can be difficult to interpret pictures. My guess is that the blade is relatively flat until the line identified as the medial ridge, and that the edge slopes from there. Pressing the blade flat against a table, looking to see if the edge is coming up at an angle or alternatively seeing if the edge is parallel with the table, would test this very easily.

The tang follows the curve of the handle to the peened end. It is not unusual for Chinese dao to have a handle offset toward the back of the blade like a kitchen knife.

To me, the fullers look like provincial work that was filed rather than chiseled, leaving two small grooves as evidence at the base of where the fullers come together. This does not seem like Japanese work, or work from a more refined area of sword manufacture in China.

Quite possible.

But considering that we only have very few average photos available and that the condition of the sword is quite poor, we can only speculate whether it has a Japanese blade or not.

[Roland_M]

Originally Posted by mariusgmioc

Quite possible.

But considering that we only have very few average photos available and that the condition of the sword is quite poor, we can only speculate whether it has a Japanese blade or not.

We can check the flexibility of the blade. If it's flexible, it is very sure not from Japan. Is it soft and easily to bend, it could come from Japan.
The reputation of japanese swords in western culture is much better than their value from the technical point of view, thanks to Hollywood. Very difficult to fight with, much more exigent than european swords, too soft and too slow. The european longsword or the Ottoman Kilij are worlds better than the famous Katana. The Europeans copied the Ottoman Kilij and Persian Shamshir but they never adopted the Katana.

As far as I know, the first japanese swords in the ~7th century were copys of chinese swords. The typical shape of a Katana is a chinese invention.

Roland

[Gustav]

[mariusgmioc]

Originally Posted by Roland_M

We can check the flexibility of the blade. If it's flexible, it is very sure not from Japan. Is it soft and easily to bend, it could come from Japan.
The reputation of japanese swords in western culture is much better than their value from the technical point of view, thanks to Hollywood. Very difficult to fight with, much more exigent than european swords, too soft and too slow. The european longsword or the Ottoman Kilij are worlds better than the famous Katana. The Europeans copied the Ottoman Kilij and Persian Shamshir but they never adopted the Katana.

As far as I know, the first japanese swords in the ~7th century were copys of chinese swords. The typical shape of a Katana is a chinese invention.

Roland

Hey Roland,

Nice to hear from you!

I agree with some of your points but disagree with others.

It is true the reputation of Japanese Katana is significantly exagerated, however they are formidable weapons that can compete with the best European or otherwise blades and in most cases outperform them. It is only that they are particularly designed for a specific fighting style that may give the impression they are not as good as their competitors. More preciesely as they are relatively light and even more so with a very light tip (in comparison with the Dao), they are not suitable for hacking strokes. However, they perform exceptionally well with slashing strokes. I have even seen a documentary where a Katana was put to a test aginst an European Longsword (you may find it on YouTube, just type "katana vs longsword") and won in most of the particulat tests (like cutting or stabbing test, were it outperformed the European Longsword).

As with regards to the flexibility test you propose, that can be extremely misleading and dangerous as you can end up with a bent blade or injury without reaching any conclusion. I have about six Katanas and their flexibility varies significantly but within the normal expected range for a steel blade with the respective proportions. And this won't be by any discernable means significantly different from a san-mai Chinese sword of the same proportions.

True that early Japanese swords were copied from Chinese, and mostly from Korean swords, but then we can also say that European swords were also copied from... say Roman swords (with the European longsword being nothing but a longer wversion of a Roman Gladius and a bigger crossguard). However, Japanese swords are certainly a class of their own and definitely very diferent from the early Korean swords they were modelled after.

PS: Coming back to this sword, I believe that another point favourig the Japanese origin is its general shape with a fairly long and narrow blade and a rather thin and light tip. Chinese fighting style with the Dao is very much based on hacking strokes (hence the hilt bent towards the edge) that would require a heavier blade, with more of the weight distributed towards the tip.

[Roland_M]

Originally Posted by mariusgmioc

Hey Roland,

Nice to hear from you!

I agree with some of your points but disagree with others.

It is true the reputation of Japanese Katana is significantly exagerated, however they are formidable weapons that can compete with the best European or otherwise blades and in most cases outperform them. It is only that they are particularly designed for a specific fighting style that may give the impression they are not as good as their competitors. More preciesely as they are rather light and even more so with a very light tip, they are not suitable for hacking strokes. However, they perform exceptionally well with slashing strokes. I have even seen a documentary where a Katana was put to a test aginst an European Longsword (you may find it on YouTube, just type "katana vs longsword") and won in most of the particulat tests (like cutting or stabbing test, were it outperformed the European Longsword).

True that early Japanese swords were copied from Chinese, and mostly from Korean swords, but then we can also say that European swords were also copied from... say Roman swords.

Hi Marius,

also nice to hear from you!
I know the Video you mentioned. It was made with modern swords.

According to historical sources, the Japanese Samurai were pretty happy, when they found out, that their blades were of higher quality than portugese swords for example. But on the other hand, european raw steel was extremely sought after in ancient Nippon. Ancient Katana made from european raw steel have a pale blue shine, while Tamahagane is either black or dark blue, depending on the region.

I'm not just collecting swords, I also know a little about their usage. The balance of a typical early or war Katana (not the very light civil everyday Edo-Katana) is terrible. It took years until a Samurai was able to use his Katana in the right way. If one hits the target not exactly in a 90° angle, the sword will be bend. This is one reason, why it takes so long to master the Katana.

Japanes sword are extremely beautiful and aesthetic, but as a weapon I would compare it with the Starfighter plane (F-104), very fast but with a manouverability like a heavy truck full of gravel. Compared with a wootz Kilij it is like the Starfighter vs the SU35.



Best wishes,
Roland

[mariusgmioc]

Originally Posted by Roland_M

Hi Marius,

also nice to hear from you!
I know the Video you mentioned. It was made with modern swords.

According to historical sources, the Japanese Samurai were pretty happy, when they found out, that their blades were of higher quality than portugese swords for example. But on the other hand, european raw steel was extremely sought after in ancient Nippon. Ancient Katana made from european raw steel have a pale blue shine, while Tamahagane is either black or dark blue, depending on the region.

I'm not just collecting swords, I also know a little about their usage. The balance of a typical early or war Katana (not the very light civil everyday Edo-Katana) is terrible. It took years until a Samurai was able to use his Katana in the right way. If one hits the target not exactly in a 90° angle, the sword will be bend. This is one reason, why it takes so long to master the Katana.

Japanes sword are extremely beautiful and aesthetic, but as a weapon I would compare it with the Starfighter plane (F-104), very fast but with a manouverability like a heavy truck full of gravel. Compared with a wootz Kilij it is like the Starfighter vs the SU35.



Best wishes,
Roland

I agree... to disagree!

But that's the fun of it.

[ltp95002]

Here is an interesting and informative article on Japanese imported blades to Ming, China:
https://markussesko.com/2013/11/01/j...th-ming-china/

It estimated that over about a century, around 128.000 swords were imported based on official records.

As some of you aware, most of the weapons were destroyed over the last century, especially during the culture revolution period. Even if we can find these Japanese import now they would be extremely rare. However this type of blades are relatively easy to find in China's collector circle. This kind of confirms that these type of blades were mass produced locally as well. We have seen similar shaped blades in China, Korea and Vietnam. Unfortunately it is hard to find official records or studies that distinguish the difference between locally made blade and Japanese imported blade.

I have posted another blade. Please note that this was discovered in GuangXi region, and confirmed is a Chinese made blade. I cannot personally confirm this since it is still in China. It was originally purchased thinking it is a Japanese blade, but then later found it is not.