Features of this keris.

Rick · 22nd December 2005, 10:23 PM

Very pricey ?

Alam Shah · 23rd December 2005, 01:32 AM

Quote:

Originally Posted by Rick

Very pricey ?

Which comes back to the Mcusta, precison machine custom knife.
This is a low-cost mass production knife, assembly and finished by hand. All I'm implying is, it's possible to make one by using CAM. I'm not saying that CAM can do everything, either. As Tim had mentioned, it has it's limitations.

I love custom knives too.
Tim, do not worry. Craftsmen like yourself are always in demand. The work done by skilled craftmen cannot be matched by machines, the human element are alway required (even in the mcusta case).

Rick, it's not an auto. It's a liner-lock folder. For more info...
http://www.knifeworks.com/index.asp?...&Category=1261

Of course there are those eye-popping beauties...
http://www.nordicknives.com/knife_ty...y_folders.html

(Er...I think I've posted in the wrong forum...should be in bladeforum.com instead).

Emanuel · 23rd December 2005, 03:33 AM

Alam Shah, Rick and Tim Simmons,

Since I opened the machinist's box, and I acknowledge the unbelievable advances in technology of this century, I'm trying to understand the feasability of machined keris...The knives presented above don't have complex surfaces like keris. They consist of many machined components, cutting and removal from a "damascus" billet -or granted, a fully forged blade- and manual assembly, no?
I guess the wilah could be mold-injected molten material, but then it's all wrong

and you would get some sort of alloy/fused steel, not pamor. You could try using combinations of press and rollers but...how?? There's no automatic/mechanical process to my knowledge that could duplicate the manual shaping of the blade. Assuming a pre-forged shaped blade, how to carve the prabot? CAM milling could easily duplicate the ricikan of these nice keris in aluminium alloy, but if the machines were put to work on the low laminate keris blades, how would they fare? Wouldn't this irreparably mangle the pamor layers?
Having more or less broken down the work involved, are CAM keris possible?
Next time I'm around a shop, I'll ask

.

Regards,
Manolo

nechesh · 23rd December 2005, 03:59 AM

Quote:

Originally Posted by Manolo

Alam Shah, Rick and Tim Simmons,

Since I opened the machinist's box, and I acknowledge the unbelievable advances in technology of this century, I'm trying to understand the feasability of machined keris...The knives presented above don't have complex surfaces like keris. They consist of many machined components, cutting and removal from a "damascus" billet -or granted, a fully forged blade- and manual assembly, no?
I guess the wilah could be mold-injected molten material, but then it's all wrong

and you would get some sort of alloy/fused steel, not pamor. You could try using combinations of press and rollers but...how?? There's no automatic/mechanical process to my knowledge that could duplicate the manual shaping of the blade. Assuming a pre-forged shaped blade, how to carve the prabot? CAM milling could easily duplicate the ricikan of these nice keris in aluminium alloy, but if the machines were put to work on the low laminate keris blades, how would they fare? Wouldn't this irreparably mangle the pamor layers?
Having more or less broken down the work involved, are CAM keris possible?
Next time I'm around a shop, I'll ask

.

Regards,
Manolo

Alam Shah · 23rd December 2005, 04:05 AM

Manolo, after watching (Empu Djeno) keris-making video,

I'm convinced that it's not possible to get a good quality keris from CAM process. Knife shapes are simpler to make whilst the keris, due to it's luk shapes, curves, ricikan and grooves are difficult and almost impossible to emulate by modern process.

Experiments are always welcomed (at your own risk and cost).

So Tim, no worries. By the way can I see some examples of your work, please.

23rd December 2005, 03:33 AM	#3
Emanuel Member Join Date: Jul 2005 Location: Toronto, Canada Posts: 1,242	CAM - Keris? Alam Shah, Rick and Tim Simmons, Since I opened the machinist's box, and I acknowledge the unbelievable advances in technology of this century, I'm trying to understand the feasability of machined keris...The knives presented above don't have complex surfaces like keris. They consist of many machined components, cutting and removal from a "damascus" billet -or granted, a fully forged blade- and manual assembly, no? I guess the wilah could be mold-injected molten material, but then it's all wrong and you would get some sort of alloy/fused steel, not pamor. You could try using combinations of press and rollers but...how?? There's no automatic/mechanical process to my knowledge that could duplicate the manual shaping of the blade. Assuming a pre-forged shaped blade, how to carve the prabot? CAM milling could easily duplicate the ricikan of these nice keris in aluminium alloy, but if the machines were put to work on the low laminate keris blades, how would they fare? Wouldn't this irreparably mangle the pamor layers? Having more or less broken down the work involved, are CAM keris possible? Next time I'm around a shop, I'll ask . Regards, Manolo

22nd December 2005, 10:23 PM	#1
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,336	Very pricey ?

23rd December 2005, 04:05 AM	#5
Alam Shah Member Join Date: Jan 2005 Location: Singapore Posts: 1,248	Manolo, after watching (Empu Djeno) keris-making video, I'm convinced that it's not possible to get a good quality keris from CAM process. Knife shapes are simpler to make whilst the keris, due to it's luk shapes, curves, ricikan and grooves are difficult and almost impossible to emulate by modern process. Experiments are always welcomed (at your own risk and cost). So Tim, no worries. By the way can I see some examples of your work, please.