Corrosion on gilded keris blade

krissman · 15th February 2015, 12:55 AM

Thanks for all the good information. Fire gilding is what I imagined was used the most and hadn't thought about the koftgari and "plug" methods. They all make sense.

Will M · 15th February 2015, 04:05 PM

Renaissance Wax is a micro crystaline wax that is great for protecting blades.
I apply it wth a soft cloth then a heat gun to help it bond. Always better to handle a dry blade than an oily one that attracts dust etc.

Anthony G. · 1st June 2024, 02:25 AM

Quote:

Originally Posted by krissman

Thanks for all the good information. Fire gilding is what I imagined was used the most and hadn't thought about the koftgari and "plug" methods. They all make sense.

Take a look at this video, the smith is based in Madura, Indonesia.

https://www.youtube.com/watch?v=G1gKhl_CGlU

A. G. Maisey · 1st June 2024, 06:04 AM

) Possible Origin and Pamor?
Complete keris, including dress:- East Jawa
Pamor name I cannot give from what I can see

2) Can this keris be some sort of hierarchical marker? Does the kinatah in the middle of the blade have and meaning?
Almost anything can become a hierarchical marker, it depends on the hierarchy.
A band across the blade whether gold or pamor is usually understood as a protective device

3) The kinatah - Is it possible that the steel is carved to approximate shape, then fairly heavy gold is applied over the carving in a similar fashion to koftgari work, and that gold is then carved with the motif. (One possible method you mentioned above
Carved, yes, Anthony's video gives a broad approximation.
There are many methods of applying gold to iron and steel, in the video I believe we are seeing the necessary copper foundation being applied. Here is as good a non-technical explanation of the process as any.

https://www.metmuseum.org/toah/hd/fire/hd_fire.htm

4) (Last Pic). I posted this keris on another thread earlier and the opinion is that this keris was made say in the 1980s-1990s. What method would have been used for this kinatah taking into consideration more modern tools and methods were available then? Or was this perhaps fire guided too?

Yes, I think the time frame is about right, but I cannot give a supportable opinion on how it was done by looking at a picture.

15th February 2015, 12:55 AM	#1
krissman Member Join Date: Jan 2012 Posts: 4	Thanks for all the good information. Fire gilding is what I imagined was used the most and hadn't thought about the koftgari and "plug" methods. They all make sense.

15th February 2015, 04:05 PM	#2
Will M Member Join Date: Mar 2012 Location: In the wee woods north of Napanee Ontario Posts: 394	Renaissance Wax is a micro crystaline wax that is great for protecting blades. I apply it wth a soft cloth then a heat gun to help it bond. Always better to handle a dry blade than an oily one that attracts dust etc.

1st June 2024, 06:04 AM	#4
A. G. Maisey Member Join Date: May 2006 Posts: 6,988	) Possible Origin and Pamor? Complete keris, including dress:- East Jawa Pamor name I cannot give from what I can see 2) Can this keris be some sort of hierarchical marker? Does the kinatah in the middle of the blade have and meaning? Almost anything can become a hierarchical marker, it depends on the hierarchy. A band across the blade whether gold or pamor is usually understood as a protective device 3) The kinatah - Is it possible that the steel is carved to approximate shape, then fairly heavy gold is applied over the carving in a similar fashion to koftgari work, and that gold is then carved with the motif. (One possible method you mentioned above Carved, yes, Anthony's video gives a broad approximation. There are many methods of applying gold to iron and steel, in the video I believe we are seeing the necessary copper foundation being applied. Here is as good a non-technical explanation of the process as any. https://www.metmuseum.org/toah/hd/fire/hd_fire.htm 4) (Last Pic). I posted this keris on another thread earlier and the opinion is that this keris was made say in the 1980s-1990s. What method would have been used for this kinatah taking into consideration more modern tools and methods were available then? Or was this perhaps fire guided too? Yes, I think the time frame is about right, but I cannot give a supportable opinion on how it was done by looking at a picture.