A folding butt carbine

Fernando K · 12th December 2012, 06:04 PM

Hello:

To operate the "set screw", a channel is required in the jaw screw, which can not be noticed in the lock the post number 20. I do not know if Fernando lock has this ...

Affectionately. Fernando K

.

Fernando K · 12th December 2012, 06:07 PM

Hola:

Para actuar, el "set screw" requiere un canal en el tornillo pèdrero (flint screw), que no se observa en la llave (lock) del post numero 20. No sé si el arma de Fernando la tiene....

Afeectuosamente. Fernando K

fernando · 12th December 2012, 09:18 PM

Hola Fernando,
I am not sure if it has to be always as you say. If there is a channel, you have to insert the setscrew always in the same position, which is not so viable, once the flints don't always have the same thickness, thus requiring different settings.

Fernando K · 13th December 2012, 12:13 AM

Hola, Fernando

No estoy de acuerdo contigo. El tornillo pedrero (flint screw) queda en la misma posición, haciendo presión sobre la mandíbula superior, cualquiera sea la medida de la piedra (flint), y en consecuencia, el agujero roscado pàra el "set screw" debería quedar enfrentado al canal (channel) del tornillo pedrero (flint screw)

Afectuosamente, y pese a las dificultades de la traducción, Fernando K

Fernando K · 13th December 2012, 12:14 AM

Hello, Fernando

I disagree with you. The screw scree (flint screw) is in the same position, putting pressure on the upper jaw, whatever the extent of the stone (flint), and therefore the threaded hole for the "set screw" should be facing the channel (channel) pedrero screw (flint screw)

Affectionately, and despite the difficulties of translation, Fernando K

Fernando K · 13th December 2012, 01:16 AM

Hola:

Ahora que estoy revisando todo, veo que en el arma del post numero 13, con el tornillo pedrero (flint screw) fuera de la mandibula superior, se vé claramente el canal (channel). La función del "set screw", sería la de mantener indisolublemente unidos el tornillo pedrero (flint screw) a la mandibula superior, cualquiera sean las vueltas que se de a aquel.

Afectuosamente. Fernando

Fernando K · 13th December 2012, 01:17 AM

Hello:

Now I'm reviewing everything, I see the weapon of post number 13, with screw scree (flint screw) outside the upper jaw, it is clear the channel (channel). The function of the "set screw", would be to keep the screw pedrero inextricably linked (flint screw) to the upper jaw, whatever turns you on to that.

Affectionately. Fernando

12th December 2012, 06:04 PM	#1
Fernando K Member Join Date: Apr 2010 Posts: 671	Hello: To operate the "set screw", a channel is required in the jaw screw, which can not be noticed in the lock the post number 20. I do not know if Fernando lock has this ... Affectionately. Fernando K . Last edited by fernando; 12th December 2012 at 09:14 PM. Reason: Translation correction atempt

12th December 2012, 06:07 PM	#2
Fernando K Member Join Date: Apr 2010 Posts: 671	Hola: Para actuar, el "set screw" requiere un canal en el tornillo pèdrero (flint screw), que no se observa en la llave (lock) del post numero 20. No sé si el arma de Fernando la tiene.... Afeectuosamente. Fernando K

12th December 2012, 09:18 PM	#3
fernando (deceased) Join Date: Dec 2004 Location: Portugal Posts: 9,694	Hola Fernando, I am not sure if it has to be always as you say. If there is a channel, you have to insert the setscrew always in the same position, which is not so viable, once the flints don't always have the same thickness, thus requiring different settings.

13th December 2012, 12:13 AM	#4
Fernando K Member Join Date: Apr 2010 Posts: 671	Hola, Fernando No estoy de acuerdo contigo. El tornillo pedrero (flint screw) queda en la misma posición, haciendo presión sobre la mandíbula superior, cualquiera sea la medida de la piedra (flint), y en consecuencia, el agujero roscado pàra el "set screw" debería quedar enfrentado al canal (channel) del tornillo pedrero (flint screw) Afectuosamente, y pese a las dificultades de la traducción, Fernando K

13th December 2012, 12:14 AM	#5
Fernando K Member Join Date: Apr 2010 Posts: 671	Hello, Fernando I disagree with you. The screw scree (flint screw) is in the same position, putting pressure on the upper jaw, whatever the extent of the stone (flint), and therefore the threaded hole for the "set screw" should be facing the channel (channel) pedrero screw (flint screw) Affectionately, and despite the difficulties of translation, Fernando K

13th December 2012, 01:16 AM	#6
Fernando K Member Join Date: Apr 2010 Posts: 671	Hola: Ahora que estoy revisando todo, veo que en el arma del post numero 13, con el tornillo pedrero (flint screw) fuera de la mandibula superior, se vé claramente el canal (channel). La función del "set screw", sería la de mantener indisolublemente unidos el tornillo pedrero (flint screw) a la mandibula superior, cualquiera sean las vueltas que se de a aquel. Afectuosamente. Fernando

13th December 2012, 01:17 AM	#7
Fernando K Member Join Date: Apr 2010 Posts: 671	Hello: Now I'm reviewing everything, I see the weapon of post number 13, with screw scree (flint screw) outside the upper jaw, it is clear the channel (channel). The function of the "set screw", would be to keep the screw pedrero inextricably linked (flint screw) to the upper jaw, whatever turns you on to that. Affectionately. Fernando