The Omani Khanjar

[Michael Blalock]

Here are some photos of an Omani Khanjar that just arrived. It's a classic and goes with my Omani swords.

[Ibrahiim al Balooshi]

Originally Posted by Michael Blalock

Here are some photos of an Omani Khanjar that just arrived. It's a classic and goes with my Omani swords.

Salaams Michael Blalock ~ Interesting Khanjar. Looks like Rhino in the hilt. This looks like the Royal Khanjar style though perhaps restyled below the belt which makes it a 4 ringer.. My guess is this carries a re-styled scabbard but from which region? Salalah?
Regards,
Ibrahiim al Balooshi.

[Michael Blalock]

Yes, Ibrahiim, the hilt is identical to this one.
http://www.swordsantiqueweapons.com/s853_full.html

You could replace all the missing parts on either hilt if you had the other, but the scabbards are quite different.

[Ibrahiim al Balooshi]

Originally Posted by Michael Blalock

Yes, Ibrahiim, the hilt is identical to this one.
http://www.swordsantiqueweapons.com/s853_full.html

You could replace all the missing parts on either hilt if you had the other, but the scabbards are quite different.

Salaams Michael Blalock~ It is confirmed that #44 is a Salalah Khanjar but the hilt being Royal by design. The criss cross wire of the scabbard being an indicator though not all Salalah scabbards are like this; some are.

On the two hilts at # 46, I would even say these were made by the same silversmith such are the precise similarities
Regards,
Ibrahiim al Balooshi.

[Ibrahiim al Balooshi]

Salaams All ~ Note to Forum;

The Khanjar.

It occurred to me that using silver pins hammered into Omani Khanjar Hilts is done for several reasons;

1. To add weight and balance to the hilt.
2. To add value since the weight of several hundred silver pins is considerable.
3. To decorate the hilt... specifically Rhino since other materials would split where as Rhino accepts the myriad of pins without breaking.
4. Prestige; since it can be seen from a distance and at a glance that here is a Khanjar with Rhino Hilt thus the wearer is a person of some standing.
5. To emulate the spaghetti ended look of Rhino Horn in the pommel top.

It may be an important discovery notwithstanding the fact that a lot of Royal Khanjars have Rhino Hilts (their hilt design is very different) the use of pins in other Omani Khanjars seems to be hand in hand with Rhino Horn useage.
It occurred to me that this one animal had an astonishing influence upon Omani Khanjars up to and beyond the inclusion in design in the mid 19th Century of the Royal Khanjar which though only a tiny fraction of the hilt is showing almost all were constructed of Rhino Horn. Non Royal variants must, if they are to have serious worth, be Rhino Hilted.

The Rhino.
I have discovered that 11 hilts could be made from the large horn whilst 3 were possible from the small horn.. Richardson and Dorr "The Craft Herritage of Oman" refers.
The Rhino thus is involved in some powerful influence on this weapon...The African trade factor, Prestige, Power(the power possessed by a Rhino), Design of the Hilt and the practical acceptance of hammered pins, The most expensive of horns...worth more per gram than gold.

In what other ways has this animal influenced Omani Khanjar design...?

The Link.

Could the Rhino Horn, in fact, be the essentail design in the curve of the Khanjar Scabbard ? ...We may have hit the nail on the head...

Regards,
Ibrahiim al Balooshi.

Notes; For a remarkable visual of "Hilt Silver Pins" comparing the design to Rhino Horn natural form; view http://www.vikingsword.com/vb/showthread.php?t=15905 at picture 5 on #1.

[spiral]

Originally Posted by Ibrahiim al Balooshi

It occurred to me that using silver pins hammered into Omani Khanjar Hilts is done for several reasons;

1. To add weight and balance to the hilt.
2. To add value since the weight of several hundred silver pins is considerable.
3. To decorate the hilt... specifically Rhino since other materials would split where as Rhino accepts the myriad of pins without breaking.
4. Prestige; since it can be seen from a distance and at a glance that here is a Khanjar with Rhino Hilt thus the wearer is a person of some standing.
5. To emulate the spaghetti ended look of Rhino Horn in the pommel top.

.

1, I agree.

2, I agree.

3,I agree.

4,I agree

5, Not sure realy. Eye of the beholder i guess...

6. Last but perhaps not of least importance,to provide a sturdy grip to wet,sweaty or even bloody hands.... Usefull in the times it was still a weapon Im sure.

spiral

[Ibrahiim al Balooshi]

Originally Posted by spiral

1, I agree.

2, I agree.

3,I agree.

4,I agree

5, Not sure realy. Eye of the beholder i guess...

6. Last but perhaps not of least importance,to provide a sturdy grip to wet,sweaty or even bloody hands.... Usefull in the times it was still a weapon Im sure.

spiral

Salaams Spiral ~ It is still a weapon.

Lest we forget the blade was designed "it is said" as a skinning weapon and certainly slippery hands covered in blood would be normal... I would go further into the realms of the Rhino story by indicating that Rhino skin was favoured for the Omani Terrs .. The Buckler battle shield further indicating the influence of this great animal in the history of Omani weaponry.

I urge you to reconsider point 5 above... the pins are a masterful takeoff of the pattern of the spaghetti ends ~ and the entire arguement, discussion, and debate is pinned to that ('scuse pun). From this detail I attach the full on disclosure of the shape of the Omani Scabbard being directly linked to the Rhino Horn design / shape. There is virtually no other practical reason that holds water ~ the key indicators being ~

1. Sea Trade influence with Africa.(availability of Rhino Horn)
2. The prowess of the Rhino ( Power ! Prestige ! Price ! )
3. Practicality( non slip, easy to decorate, translucency with age etc)
4. The fact that the best Terrs shields were taken from Rhino Hide.
5. Looks like a Rhino horn shape.
6. The best hilt is Rhino so why not the scabbard design?

I therefor submit to Forum that the shape of the Omani Khanjar Scabbard is directly related to the Rhino Horn.

Cautionary note: There is some discussion in my team at this time over the origin of material for the Terrs which on one hand appears to be from a land animal waterbuffalo or Rhino? and on the other from a sea animal they call sea dog... probably walruss ... It may be that it is from both. These days I have encountered wooden and reed variants and modern poly/resin products.

Regards,
Ibrahiim al Balooshi.