Yemeni? Silver Cartridge belt or Bandolier

kahnjar1 · 1st August 2011, 07:46 PM

WOW!!! ENVY ENVY

spiral · 2nd August 2011, 09:55 AM

Cheers Rick! It does look like the .43 Egyption would proberly fit then, With a base diameter of 14mm but would guess other old blackpowder & early smokeless cartrigides would as well? As you say I need to see a cartridge collector.

Thanks Kahnjar! Do you think Yemini seems right or could it be something else?

Spiral

Atlantia · 2nd August 2011, 10:18 AM

Hi Jonathan.
Interesting thing, don't remember seeing one like it before.
Drag it along to one of the military fairs near us and you might be able to find someone with de-ac cartridges for WW1/2 rifles to try in it?
Would .303's fit?
http://en.wikipedia.org/wiki/.303_British

Michael Blalock · 2nd August 2011, 01:32 PM

It does not look Yemeni or middle eastern to me. It could be from the golden triangle.

kahnjar1 · 2nd August 2011, 07:19 PM

Quote:

Originally Posted by spiral

Cheers Rick! It does look like the .43 Egyption would proberly fit then, With a base diameter of 14mm but would guess other old blackpowder & early smokeless cartrigides would as well? As you say I need to see a cartridge collector.

Thanks Kahnjar! Do you think Yemini seems right or could it be something else?

Spiral

I realy have no idea as to origin and have not seen anything like it before (sadly!) As to what would fit, there is a book (similar sort of thing to Gun Digest) called Cartridges of the World. This shows dimensions of all?? known cartridges split into Military, Sporting etc. I feel sure that you will be able to find someone local to you who has a copy you could borrow. I have a copy here but it would be quite a long job to sort out what would fit your belt, though if you would give me base and top diam and also cartridge length I will see if I can find anything that would fit. It could also be made to hold powder dispensers for muzzle loaders rather than complete cartridges.
Regards Stuart

spiral · 3rd August 2011, 12:12 AM

Cheers Gene took it up to a friend today who dropped a deactivated .303 into it for me, it just caught on the rim {so diameter or the fat part of tube must be about 13.5 } but I dont think thats what it was made for.

In a bandolier the base of cartridge would need to be able to be grasped I think. So someting bigger than a .303 it seems.

Thanks Stuart, theres enough variation in the sizes or how deep the rounds should sit that without someone dropping exactly the right round into it I think it would be hard to be sure. Interesting though that it could also hold powder dispensers! Thank you much though.

Great input Michael! I am a more than a little surprised though! I thought the small soldered balls & fretwork in this style were certanly classical Arab tribal or possibly even Yemeni or beduin work silver work? But as I said not realy my field, gos to show a little knowledge can be a dangerous thing!

Ive handled much pre. ww2 silver work years ago mostly from Burma but some Thai, {Siam then of course..} & cant see any connection?

The lack of an obvious plant or animal symbolism in such hand made piece strikes me as very Muslim? {Although perhaps the symbols on the buckle might represent some creature in a very base form.}

Something of a mystery so far it seems! mmmmmmmm Interesting!

Spiral

spiral · 3rd August 2011, 08:50 PM

Ok this is getting interesting a fellow forumite emailed me this photo today..

Clearly Very similar piece & workmanship. Cartridges look like heavy calibre late 19th century pieces to me.

Apparently from the Sheikh Faisal Bin Quasim museam in Quater. Where its displayed as a c.1910 Yemeni piece in solid silver according to my friends recollection.

So Arab manufacture seems extremly likely? Perhaps Yemini even? depending on the Quater museams research or provenance?

What makes it look non Arab to your eyes Michael? Could it be from a particular ethnic group or culture perhaps?

Spiral

Atlantia · 3rd August 2011, 09:06 PM

Very interesting Jonathan.
I gotta say that the cartridges in the pic look like Martini Henry.
But I think Rick's .43 sounds like a front runner.
The calibre of the cartridge will also help in dating. I'd guess that the date of 1910 is going to be pretty close (or slightly before) if the cartridge is right in the new picture. It looks like it's 'chambered' for pre copper-jacket amunition.
Also of course, if it's bigger than .303, then thats a hell of a slug!
Here's a picture from wiki:
http://en.wikipedia.org/wiki/Martini-Henry

With a few carts to compare with the .303 on the end, perhaps it'll give more of an idea of what you're looking for?
The description is:
(From Left to Right): A .577 Snider cartridge, a Zulu War-era rolled brass foil .577/450 Martini-Henry Cartridge, a later drawn brass .577/450 Martini-Henry cartridge, and a .303 British Mk VII SAA Ball cartridge.

spiral · 3rd August 2011, 11:03 PM

Thanks Gene, the heavy calibre Brit cartridges look to fat at the cartridge base to be plausible I think, so agree .43 Egyptian seems most likely so far, although I understand from my .303 friend there were similar sized Turkish & Mauser rounds, {If I took that in correctly.} which I havent looked into yet. {He didnt have any to hand, sadley.}

I reckon the calibre is round the .43 to .45 range though.

mmmmmmmm

Think were getting nearer....

Spiral

3rd August 2011, 08:50 PM	#7
spiral Member Join Date: Dec 2004 Posts: 1,712	Ok this is getting interesting a fellow forumite emailed me this photo today.. Clearly Very similar piece & workmanship. Cartridges look like heavy calibre late 19th century pieces to me. Apparently from the Sheikh Faisal Bin Quasim museam in Quater. Where its displayed as a c.1910 Yemeni piece in solid silver according to my friends recollection. So Arab manufacture seems extremly likely? Perhaps Yemini even? depending on the Quater museams research or provenance? What makes it look non Arab to your eyes Michael? Could it be from a particular ethnic group or culture perhaps? Spiral Last edited by spiral; 3rd August 2011 at 11:39 PM. Reason: slip up in copy & paste that read appalingly.

3rd August 2011, 09:06 PM	#8
Atlantia Member Join Date: Jun 2008 Location: The Sharp end Posts: 2,928	Very interesting Jonathan. I gotta say that the cartridges in the pic look like Martini Henry. But I think Rick's .43 sounds like a front runner. The calibre of the cartridge will also help in dating. I'd guess that the date of 1910 is going to be pretty close (or slightly before) if the cartridge is right in the new picture. It looks like it's 'chambered' for pre copper-jacket amunition. Also of course, if it's bigger than .303, then thats a hell of a slug! Here's a picture from wiki: http://en.wikipedia.org/wiki/Martini-Henry With a few carts to compare with the .303 on the end, perhaps it'll give more of an idea of what you're looking for? The description is: (From Left to Right): A .577 Snider cartridge, a Zulu War-era rolled brass foil .577/450 Martini-Henry Cartridge, a later drawn brass .577/450 Martini-Henry cartridge, and a .303 British Mk VII SAA Ball cartridge. Attached Images

1st August 2011, 07:46 PM	#1
kahnjar1 Member Join Date: Aug 2007 Location: CHRISTCHURCH NEW ZEALAND Posts: 2,789	WOW!!! ENVY ENVY

2nd August 2011, 09:55 AM	#2
spiral Member Join Date: Dec 2004 Posts: 1,712	Cheers Rick! It does look like the .43 Egyption would proberly fit then, With a base diameter of 14mm but would guess other old blackpowder & early smokeless cartrigides would as well? As you say I need to see a cartridge collector. Thanks Kahnjar! Do you think Yemini seems right or could it be something else? Spiral

2nd August 2011, 10:18 AM	#3
Atlantia Member Join Date: Jun 2008 Location: The Sharp end Posts: 2,928	Hi Jonathan. Interesting thing, don't remember seeing one like it before. Drag it along to one of the military fairs near us and you might be able to find someone with de-ac cartridges for WW1/2 rifles to try in it? Would .303's fit? http://en.wikipedia.org/wiki/.303_British

2nd August 2011, 01:32 PM	#4
Michael Blalock Member Join Date: Apr 2005 Location: dc Posts: 271	It does not look Yemeni or middle eastern to me. It could be from the golden triangle.

3rd August 2011, 12:12 AM	#6
spiral Member Join Date: Dec 2004 Posts: 1,712	Cheers Gene took it up to a friend today who dropped a deactivated .303 into it for me, it just caught on the rim {so diameter or the fat part of tube must be about 13.5 } but I dont think thats what it was made for. In a bandolier the base of cartridge would need to be able to be grasped I think. So someting bigger than a .303 it seems. Thanks Stuart, theres enough variation in the sizes or how deep the rounds should sit that without someone dropping exactly the right round into it I think it would be hard to be sure. Interesting though that it could also hold powder dispensers! Thank you much though. Great input Michael! I am a more than a little surprised though! I thought the small soldered balls & fretwork in this style were certanly classical Arab tribal or possibly even Yemeni or beduin work silver work? But as I said not realy my field, gos to show a little knowledge can be a dangerous thing! Ive handled much pre. ww2 silver work years ago mostly from Burma but some Thai, {Siam then of course..} & cant see any connection? The lack of an obvious plant or animal symbolism in such hand made piece strikes me as very Muslim? {Although perhaps the symbols on the buckle might represent some creature in a very base form.} Something of a mystery so far it seems! mmmmmmmm Interesting! Spiral

3rd August 2011, 11:03 PM	#9
spiral Member Join Date: Dec 2004 Posts: 1,712	Thanks Gene, the heavy calibre Brit cartridges look to fat at the cartridge base to be plausible I think, so agree .43 Egyptian seems most likely so far, although I understand from my .303 friend there were similar sized Turkish & Mauser rounds, {If I took that in correctly.} which I havent looked into yet. {He didnt have any to hand, sadley.} I reckon the calibre is round the .43 to .45 range though. mmmmmmmm Think were getting nearer.... Spiral