Pre-contact Maori whalebone club

Gavin Nugent · 11th September 2010, 06:28 AM

Quote:

Originally Posted by Ron Anderson

Certainly, I will endeavour to do that.

It is in storage, along with most of my collection. I am going through there to pick something else up.

However, I think the similarity between the figure on my club and that of club 6 in the last picture provided by Vandoo is signiicant. It can hardly be ignored simply because it's a line drawing and not a photo. Line drawings are all that are preserved of clubs that are long gone.

I will say the photo reflects the poor liht in the storage area so I'm not sure any other photos I post will be much better, but let's see. Certainly, the colour of the patina in the photo is not the same when viewed directly.

Yes I agree and as Vandoo has noted there is much to keep in mind too. Great to hear I look forward to the images. There are plenty of people here who can offer a hand with photography help and or suggestions.

Gav

Ron Anderson · 11th September 2010, 06:43 AM

I also wonder if the concentric circles in my club once held moth of pearl inlays that are now gone.

I've googled pictures of early clubs with magnificent mother of pearl inlays up the frame of the club exactly where the concentric of my club line up. (Two examples on exhibit in Edinburgh spring to mind) These inlays were square, but that again is easy to understand in terms of the natural differences in personal artistic styles etc. Is it therefore also possible that there were mother of pearl inlays in the eyes at some point?

Just a thought.

Perhaps close ups will help provide some answers.

Ron Anderson · 11th September 2010, 06:55 AM

One last note from me before I post the pictures.

Most of these clubs seem to have an eagle or hawk imagine, anthropomorphic, on the hilt. If you look at both the line drawings and the photos they all seem to conform to a head with the shape of an eagle/hawk/bird of prey. There don't seem to be other kinds of animals shown. This I have also read online from other people investigating these clubs. They are predominantly eagle-like heads, with human characteristics.

However, looking at them all you'll see that there are vastly different artistic representations of these bird heads. It seems to me that all these clubs essentially have the same idea to them in depicting a hawk or eagle, but some are more humanlike than others, some are overtly birdlike.

I can certainly see eagle-like characteristics in the head on my club too. Note the pointed nose, very bird like. The eyes too are round and bird like. I would go so far as to say that mine may simply be on the extreme of the more humanoid end of the spectrum of these clubs, while other clubs are on the more birdlike end. Others are in between.

Am I making sense?

Tim Simmons · 11th September 2010, 08:50 AM

Yes Ron clear as a bell. When I get home I will post masks with the same style of facial features.

fearn · 11th September 2010, 03:43 PM

Quote:

Originally Posted by Ron Anderson

I also wonder if the concentric circles in my club once held moth of pearl inlays that are now gone.

I've googled pictures of early clubs with magnificent mother of pearl inlays up the frame of the club exactly where the concentric of my club line up. (Two examples on exhibit in Edinburgh spring to mind) These inlays were square, but that again is easy to understand in terms of the natural differences in personal artistic styles etc. Is it therefore also possible that there were mother of pearl inlays in the eyes at some point?

Just a thought.

Perhaps close ups will help provide some answers.

One thing I don't recall seeing is a perfectly round eye, centered in a circle.

The PNW artisans prefer a rounded lozenge. I don't have the book with me that covers the details, but each pupil shape was supposed to define a particular species. One didn't mix a wolf eye with an eagle nose, for instance. I suspect the tradition arose because they used chisels to make the holes, but regardless, it now is part of the style.

Not to put too fine a point on it, but it's really difficult to make perfect circles by hand, and to me, these look like they were made with a compass and/or a drill bit. Neither technology is Pre-Contact for either the Pacific Northwest or Polynesia. The fact that you've got three such circles that appear to be the same diameter really makes me think that European technology was involved.

Best,

F

David · 11th September 2010, 04:15 PM

Fearn makes an excellent point. If you examine this closely all the circles appear extremely regular and perfect. It is hard to imagine that these were each done by hand in a pre-contact environment wit stone or ivory tools. To my eye this is obviously an authentic piece, but made after European contact. I would place it amongst the NW clubs though. It shows more similarities than differences to me.

Robert · 11th September 2010, 05:18 PM

Hello, Though I know absolutely nothing about these clubs I do know that making true circles is a very easy task (something I learned in the Boy Scout years ago) by simply attaching a piece of flint to the side of a round pointed stick, making a small indent to place the point in and and rotating it by rubbing it between your hands just like you're trying to star a fire. The size of the circle just depends on the diameter of the stick you use. If you are real industrious, you can use a bow to turn the stick.

Robert

PS
I forgot to mention, you carve a flat spot on the side of the pointed stick where you are going to mount the piece of flint or what ever sharp item you are going to use.

Tim Simmons · 11th September 2010, 06:35 PM

Mask same as the handle.

fearn · 11th September 2010, 06:38 PM

Just for clarification, Robert, are you talking about drilling a hole or drilling a concentric circle?

I agree that drilling a circular hole is easy. Drilling a concentric circle is trickier, because you've got to have a tough, yet hollow bit, and then (most importantly for this piece) you've got to do it three times in a row the same way, and then center a hole in each circle. As I said, this is all tricky. It's even more tricky if it's not part of one's normal artistic repertoire.

What makes me suspicious is that there are three of those concentric circles. If all three are the same size, that's really suspicious, because exactly duplicating the size of such features is a real chore if you're doing it freehand, and there's no particular reason to do it in this design. Conversely, if you have a drill bit with a groove on the outside or anything similar, that's the design you'll get.

F

Robert · 11th September 2010, 10:35 PM

Hello Fearn, I'm talking about making a concentric circle not drilling a hole. The center hole comes first, then the circle. One way it is done is the way described above and another way is the use of a spool on a shaft with a sharp cutting bit inserted in the spool. Both ways use a center shaft with a point and can be rotated by hand or the use of a bow. Here is a link that might interest you http://www.jstor.org/pss/282168 I just wish that there were pictures to show what I am having a problem describing.

Robert

11th September 2010, 05:18 PM	#7
Robert EAAF Staff Join Date: Feb 2005 Location: Centerville, Kansas Posts: 2,196	Hello, Though I know absolutely nothing about these clubs I do know that making true circles is a very easy task (something I learned in the Boy Scout years ago) by simply attaching a piece of flint to the side of a round pointed stick, making a small indent to place the point in and and rotating it by rubbing it between your hands just like you're trying to star a fire. The size of the circle just depends on the diameter of the stick you use. If you are real industrious, you can use a bow to turn the stick. Robert PS I forgot to mention, you carve a flat spot on the side of the pointed stick where you are going to mount the piece of flint or what ever sharp item you are going to use. Last edited by Robert Coleman; 11th September 2010 at 05:38 PM.

11th September 2010, 06:35 PM	#8
Tim Simmons Member Join Date: Dec 2004 Location: What is still UK Posts: 5,890	Mask same as the handle. Attached Images

11th September 2010, 10:35 PM	#10
Robert EAAF Staff Join Date: Feb 2005 Location: Centerville, Kansas Posts: 2,196	Hello Fearn, I'm talking about making a concentric circle not drilling a hole. The center hole comes first, then the circle. One way it is done is the way described above and another way is the use of a spool on a shaft with a sharp cutting bit inserted in the spool. Both ways use a center shaft with a point and can be rotated by hand or the use of a bow. Here is a link that might interest you http://www.jstor.org/pss/282168 I just wish that there were pictures to show what I am having a problem describing. Robert Last edited by Robert Coleman; 11th September 2010 at 10:57 PM.

11th September 2010, 06:43 AM	#2
Ron Anderson Member Join Date: Aug 2010 Location: Sydney Australia Posts: 228	I also wonder if the concentric circles in my club once held moth of pearl inlays that are now gone. I've googled pictures of early clubs with magnificent mother of pearl inlays up the frame of the club exactly where the concentric of my club line up. (Two examples on exhibit in Edinburgh spring to mind) These inlays were square, but that again is easy to understand in terms of the natural differences in personal artistic styles etc. Is it therefore also possible that there were mother of pearl inlays in the eyes at some point? Just a thought. Perhaps close ups will help provide some answers.

11th September 2010, 06:55 AM	#3
Ron Anderson Member Join Date: Aug 2010 Location: Sydney Australia Posts: 228	One last note from me before I post the pictures. Most of these clubs seem to have an eagle or hawk imagine, anthropomorphic, on the hilt. If you look at both the line drawings and the photos they all seem to conform to a head with the shape of an eagle/hawk/bird of prey. There don't seem to be other kinds of animals shown. This I have also read online from other people investigating these clubs. They are predominantly eagle-like heads, with human characteristics. However, looking at them all you'll see that there are vastly different artistic representations of these bird heads. It seems to me that all these clubs essentially have the same idea to them in depicting a hawk or eagle, but some are more humanlike than others, some are overtly birdlike. I can certainly see eagle-like characteristics in the head on my club too. Note the pointed nose, very bird like. The eyes too are round and bird like. I would go so far as to say that mine may simply be on the extreme of the more humanoid end of the spectrum of these clubs, while other clubs are on the more birdlike end. Others are in between. Am I making sense?

11th September 2010, 08:50 AM	#4
Tim Simmons Member Join Date: Dec 2004 Location: What is still UK Posts: 5,890	Yes Ron clear as a bell. When I get home I will post masks with the same style of facial features.

11th September 2010, 04:15 PM	#6
David Keris forum moderator Join Date: Aug 2006 Location: Nova Scotia Posts: 7,237	Fearn makes an excellent point. If you examine this closely all the circles appear extremely regular and perfect. It is hard to imagine that these were each done by hand in a pre-contact environment wit stone or ivory tools. To my eye this is obviously an authentic piece, but made after European contact. I would place it amongst the NW clubs though. It shows more similarities than differences to me.

11th September 2010, 06:38 PM	#9
fearn Member Join Date: Dec 2004 Posts: 1,247	Just for clarification, Robert, are you talking about drilling a hole or drilling a concentric circle? I agree that drilling a circular hole is easy. Drilling a concentric circle is trickier, because you've got to have a tough, yet hollow bit, and then (most importantly for this piece) you've got to do it three times in a row the same way, and then center a hole in each circle. As I said, this is all tricky. It's even more tricky if it's not part of one's normal artistic repertoire. What makes me suspicious is that there are three of those concentric circles. If all three are the same size, that's really suspicious, because exactly duplicating the size of such features is a real chore if you're doing it freehand, and there's no particular reason to do it in this design. Conversely, if you have a drill bit with a groove on the outside or anything similar, that's the design you'll get. F