![]() |
![]() |
#1 |
Member
Join Date: May 2005
Location: Texas
Posts: 10
|
![]()
I'm very glad to have found this forum. My name is Lee and I live in Texas.
Not long agp I was given this keris as a gift. Unfortunately the sheath was lost some time before I got the knife. The previous caretaker had been under the impression that it was forged with meteorite iron, which I had thought fanciful until my fiancee found the info on these.Wow, it is possible. I always try to find out as much as I can on my own, but need more help from experts, whoever is willing. So far, I have ascertained that it is likely pre-19th Century due to the separate ganja and tang (?). The balde is 14" long, and the handle is somekind of burl wood This knife spent a long time in Iceland and was passed down through some generations there. An erroneous notion that it had been forged there was developed along the way, but I'm sure this is native Malaysian. My questions that remain are: What kind of Pamor is this, and the esoteric meaning? Can the presence of metorite iron be determined from the appearance? Any rough guesses on the date of forging? On the pamor detail image, I enhanced the contrast to make it more visible. Any help at all would be appreciated.While Paul page is amazingly informative, I could not determine the pamor from the descriptions. Thanks! Last edited by littledirtnap; 30th May 2005 at 05:23 AM. Reason: trying to get other pics to show |
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Jan 2005
Location: Singapore
Posts: 1,248
|
![]()
The blade looks more Javanese than Malaysian due to its long slim profile.
The handle is unusual for a keris. The pamor is quite nice but is not clearly visible. First impression, looks like pamor wos wutah variant. The kembang kacang, (on the left side of the blade) is broken. A full picture of the blade would be nice, so as to determine the dapur. ![]() Last edited by Alam Shah; 30th May 2005 at 12:59 PM. Reason: add-on |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Dec 2004
Posts: 175
|
![]()
littledirtnap :This does look like a very old and authentic knife ,but the hilt and blade dont match at all, the hilt looks like a gunong grip from the Philippines.
As to the meteorite question, this is one of those things that got mentioned one time in a book and now everybody thinks all keris are made from meteors.Aside from some testing of the content of the steel I dont think there is any way to tell.I seriously doubt that there are many keris that were actually made from meterites,and by many I mean very ,very ,very few. |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Dec 2004
Location: Witness Protection Program
Posts: 1,730
|
![]()
the handle is most likely moro. it's posssible it's made out of banati wood. to be specific a gunong knife handle. there are some recent threads pertaining to gunongs. looks nice, tho...
|
![]() |
![]() |
![]() |
#5 | |
Member
Join Date: May 2005
Location: Texas
Posts: 10
|
![]() Quote:
I really want to know what this pamor means so I'll get better images of it on. The blade appears to have nine waves from hilt to tip.. |
|
![]() |
![]() |
![]() |
#6 | ||
Member
Join Date: May 2005
Location: Texas
Posts: 10
|
![]() Quote:
Quote:
Thanks for the help guys! As much as I'd like to believe the folklore that has been passed along with it, that it was an athame forged in Iceland from meteorite iron, I'd rather know the truth as much as possible. If anything, I'm very excited that this knife traveled that much farther to reach me, and I am taking very good care of it. I am tossing the idea around of making a replica-type of sheath for it. If I do so, I'll research for some time before beginning. Yes, this handle is beautiful, and seems to me a bit younger than the blade. |
||
![]() |
![]() |
![]() |
#7 | |
Vikingsword Staff
Join Date: Nov 2004
Posts: 6,286
|
![]() Quote:
![]() Pick up a copy of THE KRIS by Edward Frey from amazon.com A very good place to start . ![]() Use this site's search feature for keris ; that is mostly how we refer to them here . You'll find a LOT of info . |
|
![]() |
![]() |
![]() |
#8 |
Member
Join Date: May 2005
Location: Texas
Posts: 10
|
![]()
Here is another try at decent images..hope this helps!
I'm dying to know what this pamor means, and the number of waves.I'll also keep reading on my own (thanks for the recommendations) |
![]() |
![]() |
![]() |
#9 |
Member
Join Date: Dec 2004
Location: Houston, TX, USA
Posts: 1,254
|
![]()
Sure does look like a Moro gunong handle. It's possible the "assembly" was made in Iceland, but it is worth noting that there is a thick layer of some kind of black substance between blade and hilt, and it sure does look like boiled down pitch. European cutler's pitch I've seen has a "blond" colour. I propose that this is an Indonesian blade traded/stolen/whatever to Moroland and hilted by a Moro?.....
|
![]() |
![]() |
![]() |
#10 |
Member
Join Date: May 2005
Location: Texas
Posts: 10
|
![]()
Looking at it first hand, the black substance looks like a leather separator soaked in pitch..Thanks for the input!
|
![]() |
![]() |
![]() |
#11 |
Vikingsword Staff
Join Date: Nov 2004
Posts: 6,286
|
![]()
Pamors really don't 'mean' anything they are more talismanic in nature ; some are for wealth , success in business , popularity , control over others , protection etc.
There is no doubt that is a Moro gunong hilt and a nicely figured one . |
![]() |
![]() |
![]() |
#12 |
Member
Join Date: Dec 2004
Location: Cincinnati, OH
Posts: 940
|
![]()
Well everyone is giving you fairly correct info so i don't have much to add. This looks like an old Javanese keris with pretty good age to it. Unfortunately much of the ricikan (features) have been lost to erosion, probably from extensive washing.
Definitely a Moro gunong hilt, but i'm not sue if i agree with Tom that it was hilted by a Moro only because i think a Moro wouldn't find a blade like this all that useful. It is relatively frail compared to Moro blades and really only effective (this one at least) as a stabber. But then, who knows. ![]() I agree with Rick that your pamor would have a specific "meaning" per se, but rather a more general nature. Interesting mismatch of hilt and blade. I would suggest you get a "proper" hilt fot it, but then there seems to be some history working here, no matter how muddled, that should probably be preserved. ![]() |
![]() |
![]() |
![]() |
#13 |
Member
Join Date: Dec 2004
Location: Witness Protection Program
Posts: 1,730
|
![]()
well, i know it's a 50/50 chance, but at the least whoever attached the gunong hilt on the blade had the knob facing the "right" way...
|
![]() |
![]() |
![]() |
#14 | |
Member
Join Date: Dec 2004
Location: Cincinnati, OH
Posts: 940
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
#15 |
Member
Join Date: Feb 2005
Location: Chicago area
Posts: 327
|
![]()
very interesting, 14" blade, "beak" instead of an elephant, the brass work on the ferrule is odd. the keris blade looks very old to me. wonder why the "spacer" between blade & ferrule, you would think the person that re-hilted it would have deepened the hole for the peksi, I would think if someone was going to use it for a weapon, they would have. if this keris did end up in Moroland, it might be Bugis, as the Moro were fond of the bigger keris they produced.
|
![]() |
![]() |
![]() |
#16 |
Member
Join Date: Dec 2004
Location: Cincinnati, OH
Posts: 940
|
![]()
Bill, i'm pretty sure this isn't a "beak" instead of an "elephant trunk", but a case which is very common where there "trunk" has eroded away. The blade doesn't look particularly Bugis to me, the blade is too narrow and the gonjo too long, but then you never know. I believe the "spacer" between the hilt and blade is overflowing pitch.
|
![]() |
![]() |
![]() |
#17 |
Member
Join Date: Jan 2005
Location: Singapore
Posts: 1,248
|
![]()
The blade has 11 gentle luks, with pamor wos wutah or scattered rice variation.
Pamor wos wutah is believed to enhance the owner's material well being. A proper washing in lime juice would bring back the visibility of the pamor pattern. However, with the hilt secured with thick pitch, it may be difficult to remove the hilt for a normal bath. Alternatively, it could be done with the hilt attached in a vertical position. ![]() |
![]() |
![]() |
![]() |
#18 |
Member
Join Date: May 2005
Location: Texas
Posts: 10
|
![]()
Thank you all very much for this discussion!! I want to learn as much as possible, and this is the most info I've gotten on this particualr knife so far!
I'll be careful in cleaning it..I'm a little apprehensive of eroding it further.. |
![]() |
![]() |
![]() |
#19 | |
Member
Join Date: Dec 2004
Location: Houston, TX, USA
Posts: 1,254
|
![]() Quote:
So, very broadly it is a proper hilt, and for all that the cavity is likely much wider than the tang, and perhaps shorter (I don't think the handle was made for it, or it would fit all the way in; I think the assembly is after market for both parts), I don't think I'd rehilt it if it is solidly together, at least. Now, I'm back to look at the ferule, and see if I agree that there's something unusual about it; I don't remember anything.... |
|
![]() |
![]() |
![]() |
#20 |
Member
Join Date: Dec 2004
Location: Houston, TX, USA
Posts: 1,254
|
![]()
Ferule looks pretty normal to me?
Only the lightest of etches, probably a wipe with vinegar or half a fruit (wash, dry well, and oil afterwards), would remove that light rust; the surface is basically clean and clearly etched already. To bring up the pamor significantly better would involve staining, so some layers are black and others silvery. This is a process involving arsenic ![]() |
![]() |
![]() |
![]() |
#21 |
Member
Join Date: Dec 2004
Location: Cincinnati, OH
Posts: 940
|
![]()
Now that you mention it Tom, that could indeed be a leather spacer. I was unfamilar with the European tradition. Thanks for the info.
![]() |
![]() |
![]() |
![]() |
#22 |
Member
Join Date: May 2005
Location: Texas
Posts: 10
|
![]()
I really appreciate all the input!! This helps me a great deal, as this is my first Keris, and I'd like to treat it with proper care.
The spacer is unmistakable as a small circle of leather, soaked in pitch(?).Of this I am sure. It is clearly layered from a first hand view, and has the fibrous characteristic where worn, and worn to lighter brown in small areas. I will be leaving the hilt as is, as it is tight and I have no desire to change anything. I will, however, carefully clean it. I am very glad that my asking here has produced this much discussion, and I'll take any and all I can get, and take all into consideration. Thanks!! |
![]() |
![]() |
![]() |
#24 |
Member
Join Date: Dec 2004
Location: Houston, TX, USA
Posts: 1,254
|
![]()
There are two places where you can see such leather washers on modern traditional European work. First is on fighting swords, where there is sometimes a leather or felt washer/spacer similar in size and shape to Japanese seppa between guard and blade. The other is on tanged woodworking chisels. On the swords it is usually cited as being for tight/quiet sheath-fit, though I don't know that this is its true descent; on the chisels it is held to absorb shock thru the forged bolster, padding the wood and metal from each other. A fairly integral part of this method is that the hole is longer than the tang, so all the stress goes to the end of the handle, rather than the end of the hole (there is usually a significant wedgeness to the tang, but let us leave that for now). These chisels have a square or octagonal tang otherwise rather similar to a k(e)ris tang, and a forged bolster, so this might have made sense to an European person as a way to hilt such a blade......
|
![]() |
![]() |
![]() |
#25 |
Member
Join Date: May 2005
Location: Texas
Posts: 10
|
![]()
Thank you both! I'll pick an evening soon and clean it..I think it would be pretty cool if it were hilted in Iceland
![]() |
![]() |
![]() |
![]() |
#26 |
Member
Join Date: Apr 2005
Posts: 91
|
![]()
Sorry to contradict an expert but this blade is not from Jawa. It is either Bugis or Sumatran. As for the pamor, it seems to be Pedaringan Kebak (Full Airing Cupboards) which is the same as beras-wutah, kulit-semangka, only with even more 'pamor'...which in the case of Sumatra and Bugis blades, most often is pamor Luwu, from nikel-rich iron mined since old times in Luwu, Sulawesi.
|
![]() |
![]() |
![]() |
#27 | |
Vikingsword Staff
Join Date: Nov 2004
Posts: 6,286
|
![]() Quote:
![]() When it comes to keris we are all students . ![]() Thanks for your input Kiai . ![]() |
|
![]() |
![]() |
![]() |
#28 |
Member
Join Date: Dec 2004
Location: Cincinnati, OH
Posts: 940
|
![]()
Hi Kiai. Rick's right, we are all students here. If you find that someone disagrees with you now and then it is not because they consider themselves an expert...or even smarter than you. It is just that they disagree. Very little, especially in the keris world, is ever written in stone.
![]() As for your Sumatran attribution, i think you might be on to something there, but i still can see this as a Bugis keris. I could be wrong. Afterall, i'm no expert. ![]() I look forward to your knowledgable comments on this and other threads. Would you care to venture a guess at the tangguh of this blade? |
![]() |
![]() |
![]() |
#29 |
Member
Join Date: May 2005
Location: Texas
Posts: 10
|
![]()
Yes, more please! I'm excited to hear any thoughts anyone has. Any guesses on age?
|
![]() |
![]() |
![]() |
#30 | |
Member
Join Date: Jan 2005
Location: Singapore
Posts: 1,248
|
![]() Quote:
No contradition here... ![]() After gazing the blade for a long time, I don't think it's a Bugis blade. However, I do agree that it might be a Sumatran blade due to its gentle luks and the shape of sogokan depan, sogokan belakang, janur and bungkul (the centre portion of the lower half near the base of the blade). Thank you for the update, Kiai. ![]() Nechesh, I'm no expert either.. ![]() |
|
![]() |
![]() |
![]() |
|
|