Ethnographic Arms & Armour
 

Go Back   Ethnographic Arms & Armour > Discussion Forums > Ethnographic Weapons
FAQ Calendar Today's Posts Search

Reply
 
Thread Tools Search this Thread Display Modes
Old 3rd June 2015, 03:07 PM   #1
CharlesS
Member
 
CharlesS's Avatar
 
Join Date: Dec 2004
Location: Greenville, NC
Posts: 1,857
Default SURPRISE! Wootz Steel in a Most Unexpected Place!...An Aceh Podang/Peudueng

I was fortunate enough to purchase this sword from a forum member a couple of months ago. The blade was a little spotty with some areas of deep pitting, so I sent it out to Philip Tom to see if he could improve the appearance of the blade.

When he began to polish and etch, he was astounded and contacted me immediately...."this thing's got a wootz blade...and a good wootz blade." I could not believe it as I have never seen a peudueng with a wootz blade. All the other features of the blade are quite the norm including its fullering and fexibility, though it is by no means flimsy. It also has the typical false edge of approximately 10in.

The wootz steel blade brought up and lot of questions between Phil and I, most notably "how did this sword come together"? My immediate theory was that one of the talented craftsmen from all over Asia they could be found in the Indonesian archipelago likely had made it.

But Phil brought up an excellent point...if that is case then why haven't we seen more similar blades of wootz from that area? Could it have been from a wootz ingot traded from India or Persian and then forged in Sumatra???...likely not keeping in mind the delicacy involved in forging a blade from a wootz ingot and not ruining the pattern in the process.

So now I tend to agree with Phil, with this likely being a "made to specifications order" blade requested from either Persia or India, and making it's way back to Sumatra. This is yet another sword that falls into my interest of the trade done in weapons in "dar al Islam". It's another example of a piece that I really wish "could talk" to us!

If this is the case, can you imagine the patience and care given to exact specifications, not to mention the "waiting time" for the buyer...likely at least two years!!!

Please share your thoughts on anything about the sword...its origins, construction, or otherwise.

This peudeung is nicely mounted with a better than usual hilt that has decorative motifs to he guard, a silver wire wrapped grip, and a magnificent pommel with brass mounts holding small(likely low grade) diamonds, and decorated in type Aceh enamel motifs. The hilt pad is quite nice as well, and is in great condition.

The sword came with its original leather scabbard, but there was so much grit and sand in the scabbard, it would have ruined the finished etch over time, so I asked Phil to make a wooden core scabbard for me.

I would be most interested in seeing examples of other original peudeung scabbards to give me some ideas to go by in completing this wooden one. Thanks for any pics here.

Thanks again for any input!

Dimensions:

Overall length: 42in.
Blade length: 36.5in
Widest point of the blade: 1.5in.
Attached Images
            
CharlesS is offline   Reply With Quote
Old 3rd June 2015, 03:08 PM   #2
Iain
Member
 
Iain's Avatar
 
Join Date: Mar 2010
Location: Olomouc
Posts: 1,693
Default

I'm afraid my comment is going to be reduced to just saying, what a beautiful sword! A pleasure to view it.
Iain is offline   Reply With Quote
Old 3rd June 2015, 03:53 PM   #3
Rick
Vikingsword Staff
 
Rick's Avatar
 
Join Date: Nov 2004
Posts: 6,290
Thumbs up

Nice sword Charles !!
Don't you think that most of the blades for this form of peudueng were sourced from India ?
Rick is online now   Reply With Quote
Old 3rd June 2015, 03:59 PM   #4
CharlesS
Member
 
CharlesS's Avatar
 
Join Date: Dec 2004
Location: Greenville, NC
Posts: 1,857
Default

[QUOTE=
Don't you think that most of the blades for this form of peudueng were sourced from India ?[/QUOTE]


Phil and I both assumed that was the most logical place of origin.
CharlesS is offline   Reply With Quote
Old 3rd June 2015, 10:57 PM   #5
asomotif
Member
 
asomotif's Avatar
 
Join Date: Nov 2006
Location: The Netherlands
Posts: 2,224
Default

Quote:
Originally Posted by CharlesS
Please share your thoughts on anything about the sword...its origins, construction, or otherwise.

I would be most interested in seeing examples of other original peudeung scabbards to give me some ideas to go by in completing this wooden one. Thanks for any pics here.
Dear Charles,

A very nice example.

I believe you already give a lot of details about the origin and construction.
I agree with the theory that this blade was bought from outside Atjeh.
There are also examples with english factory made trade blades.
So why not trade a wootz blade from India ?

The spike like protrusion is quite bend. Maybe that can be restored / straitened ?

As for the scabbards.
There are a few examples on www.Atchin.nl
http://www.atchin.nl/Atchin/Atjeh/Pa...Peudeueng.html

Ps, the original scabbard that came with your example, is it not wood covered with leather ? I would try to get the inside of the original scabbard cleaned in order to maintain the original scabbard.

Best regards,
Willem
asomotif is offline   Reply With Quote
Old 4th June 2015, 02:02 AM   #6
Rick
Vikingsword Staff
 
Rick's Avatar
 
Join Date: Nov 2004
Posts: 6,290
Cool

I'll just put this here as somewhat related .
http://en.wikipedia.org/wiki/Aceh_Wa..._Sultanate.png
Rick is online now   Reply With Quote
Old 4th June 2015, 05:11 AM   #7
DaveA
Member
 
DaveA's Avatar
 
Join Date: Apr 2007
Location: Wisconsin, USA
Posts: 413
Default The hilt!

I'm mesmerized by the hilt. Fantastic and meticulous decoration. Yes, I love the steel too, but the hilt is a work of art.
DaveA is offline   Reply With Quote
Old 5th June 2015, 12:05 AM   #8
spiral
Member
 
Join Date: Dec 2004
Posts: 1,712
Default

Excellent Indian blade lovely hilt as well!
spiral is offline   Reply With Quote
Old 5th June 2015, 09:20 AM   #9
Loedjoe
Member
 
Loedjoe's Avatar
 
Join Date: Nov 2011
Location: Oxford (UK)
Posts: 96
Default

Could the pommel mount be gold, rather than brass? Not that it matters much, with such fine workmanship.
Loedjoe is offline   Reply With Quote
Old 5th June 2015, 11:23 AM   #10
CharlesS
Member
 
CharlesS's Avatar
 
Join Date: Dec 2004
Location: Greenville, NC
Posts: 1,857
Default

Quote:
Originally Posted by Loedjoe
Could the pommel mount be gold, rather than brass? Not that it matters much, with such fine workmanship.

The pommel mounts are gold...not really sure why I said brass. I knew better. You have a good eye!
CharlesS is offline   Reply With Quote
Old 5th June 2015, 12:20 PM   #11
Gavin Nugent
Member
 
Gavin Nugent's Avatar
 
Join Date: Oct 2007
Posts: 2,818
Default

Another real neat sword Charles, congrats.

It seems both you and Rick have had some nice SEA swords with Wootz blades.

Here is an Amanremu from the Kelling Hall collection with what appears to be a Wootz inserted edge;

http://www.swordsantiqueweapons.com/s195_full.html

Gavin
Gavin Nugent is offline   Reply With Quote
Old 5th June 2015, 07:44 PM   #12
CharlesS
Member
 
CharlesS's Avatar
 
Join Date: Dec 2004
Location: Greenville, NC
Posts: 1,857
Default

Quote:
Originally Posted by SwordsAntiqueWeapons



Here is an Amanremu from the Kelling Hall collection with what appears to be a Wootz inserted edge;

http://www.swordsantiqueweapons.com/s195_full.html

Gavin
First time I have seen anything like that Gavin. VERY interesting. I wonder if the smith had only a small wootz ingot and decided to use it in that manner???
CharlesS is offline   Reply With Quote
Old 5th June 2015, 11:13 PM   #13
asomotif
Member
 
asomotif's Avatar
 
Join Date: Nov 2006
Location: The Netherlands
Posts: 2,224
Default

Quote:
Originally Posted by CharlesS

I would be most interested in seeing examples of other original peudeung scabbards to give me some ideas to go by in completing this wooden one. Thanks for any pics here..
collection Wereldmuseum Rotterdam inv.nr. 34300
Attached Images
 
asomotif is offline   Reply With Quote
Old 6th June 2015, 12:31 AM   #14
Rick
Vikingsword Staff
 
Rick's Avatar
 
Join Date: Nov 2004
Posts: 6,290
Smile Mysteries Of The Forge

Quote:
Originally Posted by CharlesS
First time I have seen anything like that Gavin. VERY interesting. I wonder if the smith had only a small wootz ingot and decided to use it in that manner???
Gav, lovely sword .
I wonder if all the cold shuts on your example occurred because the smith knew he would lose the wootz pattern if he heated the blade too much, thereby resulting in the aforementioned cold shuts .
Rick is online now   Reply With Quote
Old 12th June 2015, 02:33 PM   #15
CharlesS
Member
 
CharlesS's Avatar
 
Join Date: Dec 2004
Location: Greenville, NC
Posts: 1,857
Default

The use of a leather scabbard here(with the peudueng) really surprises me. I have always understood that leather does not hold up well in tropical conditions.

Perhaps someone else knows more about this???
CharlesS is offline   Reply With Quote
Old 13th June 2015, 11:53 PM   #16
Andrew
Member
 
Andrew's Avatar
 
Join Date: Nov 2004
Location: USA
Posts: 1,725
Default

Love it. Thanks for sharing, Charles.
Andrew is offline   Reply With Quote
Old 14th June 2015, 12:04 PM   #17
Gavin Nugent
Member
 
Gavin Nugent's Avatar
 
Join Date: Oct 2007
Posts: 2,818
Default

Hi Charles,

Your sword came from a very high end collection and I suspect the inventory number 209 was left in place on the scabbard?
I would leave it, it is healthy even if shrunken a little.

Charles, Rick, I really don't know what the intention was when forging the amanremu, I'd say they maker had an idea and insight in to wootz, perhaps from those who traded the ingots? I just don't know...the end result wasn't pretty but is important in the study of wootz in Sumatra.
Wootz in Sumatra is a study that I think would be worth while as personally I think your wootz blade was formed in Sumatra, not traded.

Gavin
Gavin Nugent is offline   Reply With Quote
Old 14th June 2015, 03:53 PM   #18
Rick
Vikingsword Staff
 
Rick's Avatar
 
Join Date: Nov 2004
Posts: 6,290
Smile

Charles, IIRC I have seen a couple of these scabbards and they were both leather .
I wonder if this style of sword was really meant for combat or simply as a status symbol .
Rick is online now   Reply With Quote
Old 14th June 2015, 09:15 PM   #19
Maurice
Member
 
Maurice's Avatar
 
Join Date: Jan 2007
Location: The Netherlands
Posts: 1,334
Default

Quote:
Originally Posted by CharlesS
The use of a leather scabbard here(with the peudueng) really surprises me. I have always understood that leather does not hold up well in tropical conditions.

Perhaps someone else knows more about this???
Hi Charles,

all peudeuangs I have seen and/or owned had leathered scabbards.

The Dutch marechaussees used klewangs in tropical conditions which also had leathered scabbards......

Kind regards,
Maurice
Maurice is offline   Reply With Quote
Old 14th June 2015, 09:18 PM   #20
Maurice
Member
 
Maurice's Avatar
 
Join Date: Jan 2007
Location: The Netherlands
Posts: 1,334
Default

Quote:
Originally Posted by Rick
I wonder if this style of sword was really meant for combat or simply as a status symbol .
Hi Rick,

I think, that they were meant to use in a fight. In wartime these status pieces need to do their job!
Just like the moro datu pieces. Besides the status (ivory jungayang hilts and gold or silver etc.), they also were used what they were made off when necesarry.

Kind regards,
Maurice
Maurice is offline   Reply With Quote
Old 14th June 2015, 10:20 PM   #21
asomotif
Member
 
asomotif's Avatar
 
Join Date: Nov 2006
Location: The Netherlands
Posts: 2,224
Default

Quote:
Originally Posted by Maurice
Hi Charles,

all peudeuangs I have seen and/or owned had leathered scabbards.

The Dutch marechaussees used klewangs in tropical conditions which also had leathered scabbards......

Kind regards,
Maurice
Maurice,

I believe these scabbards are of very light wood with a thin layer of leather.

Best regards,
Willem
asomotif is offline   Reply With Quote
Old 14th June 2015, 11:55 PM   #22
CharlesS
Member
 
CharlesS's Avatar
 
Join Date: Dec 2004
Location: Greenville, NC
Posts: 1,857
Default

Quote:
Originally Posted by Maurice
Hi Charles,

all peudeuangs I have seen and/or owned had leathered scabbards.

The Dutch marechaussees used klewangs in tropical conditions which also had leathered scabbards......

Hi Maurice,

I am a a little surprised by leather or leather covered scabbards on native made blades. I had understood that leather does not hold up well in such climates...but I may be totally wrong.

As for this one's original leather scabbard, I still have it and keep it with the sword, but there is so much sand or grit so deep in the scabbard that I dare not use it for fear of ruining the finish to the blade and the exposed wootz.
CharlesS is offline   Reply With Quote
Old 15th June 2015, 06:26 AM   #23
Maurice
Member
 
Maurice's Avatar
 
Join Date: Jan 2007
Location: The Netherlands
Posts: 1,334
Default

Quote:
Originally Posted by asomotif
Maurice,

I believe these scabbards are of very light wood with a thin layer of leather.

Best regards,
Willem
Hi Willem,

Yes wood covered with leather.

Kind regards,
Maurice
Maurice is offline   Reply With Quote
Old 15th June 2015, 09:55 PM   #24
asomotif
Member
 
asomotif's Avatar
 
Join Date: Nov 2006
Location: The Netherlands
Posts: 2,224
Default

Quote:
Originally Posted by CharlesS
I would be most interested in seeing examples of other original peudeung scabbards to give me some ideas to go by in completing this wooden one. Thanks for any pics here.
Finally took some pictures with acceptable daylight of a peudeung from my own collection. Scabbard leather over wood.
Blade is laminated, What would you call this blade ?

Best regards,
Willem
Attached Images
    
asomotif is offline   Reply With Quote
Old 15th June 2015, 10:31 PM   #25
Sajen
Member
 
Sajen's Avatar
 
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,761
Default

Quote:
Originally Posted by asomotif
Finally took some pictures with acceptable daylight of a peudeung from my own collection. Scabbard leather over wood.
Blade is laminated, What would you call this blade ?

Best regards,
Willem
Hello Willem,

I would call it a pamor blade. Nice sword!

Regards,
Detlef
Sajen is offline   Reply With Quote
Old 16th June 2015, 12:52 AM   #26
CharlesS
Member
 
CharlesS's Avatar
 
Join Date: Dec 2004
Location: Greenville, NC
Posts: 1,857
Default

Quote:
Originally Posted by asomotif
Finally took some pictures with acceptable daylight of a peudeung from my own collection. Scabbard leather over wood.
Blade is laminated, What would you call this blade ?

Best regards,
Willem
Really attractive patter welding there Willem...consistent and good contrast. Is this the original etch or a later one?
CharlesS is offline   Reply With Quote
Old 16th June 2015, 06:40 PM   #27
asomotif
Member
 
asomotif's Avatar
 
Join Date: Nov 2006
Location: The Netherlands
Posts: 2,224
Default

Quote:
Originally Posted by CharlesS
Really attractive patter welding there Willem...consistent and good contrast. Is this the original etch or a later one?
Hello Charles,

I did not etch it myself.
The blade was pretty much in this condition when I bought it.

Best regards,
Willem
asomotif is offline   Reply With Quote
Old 16th June 2015, 07:25 PM   #28
CharlesS
Member
 
CharlesS's Avatar
 
Join Date: Dec 2004
Location: Greenville, NC
Posts: 1,857
Default

Quote:
Originally Posted by asomotif
Hello Charles,

I did not etch it myself.
The blade was pretty much in this condition when I bought it.

Best regards,
Willem
That's even better. VERY nice!
CharlesS is offline   Reply With Quote
Old 22nd May 2016, 01:22 AM   #29
scinde
Member
 
Join Date: Apr 2016
Posts: 27
Default Pattern forged blades

Hi,

Quite new to this group, and not exactly a reply, but I would appreciate knowing the best method or process of testing a blade, to establish whether it is patterned or just plain. Thanks in advance.

Gordon
scinde is offline   Reply With Quote
Old 22nd May 2016, 11:20 AM   #30
ariel
Member
 
ariel's Avatar
 
Join Date: Dec 2004
Location: Ann Arbor, MI
Posts: 5,503
Default

There is only one way: etch it. If there is a pattern, it is "pattern welded" ( or wootz), if not, - it is monosteel.
ariel is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:48 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.