Displaying a belt - your suggestions..

Dmitry · 28th January 2010, 08:24 PM

I'm looking for suggestions or displaying this belt in a way which would not harm the leather, at the same time having a full view of the two-piece belt plate.
Any ideas?
This is a US Navy officer's sword belt with a 1852 Regulation belt plate. I would date it ca.1852-1875.

kahnjar1 · 29th January 2010, 04:41 AM

What about around some sort of cylinder. Perhaps a short piece of large diameter PVC pipe. Buckle fastened of course.
Regards Stu

fernando · 29th January 2010, 07:33 PM

Or hanging it from a little (stilized) staff

.

fernando · 29th January 2010, 07:36 PM

BTW, do you collect military belts?
Fernando

celtan · 29th January 2010, 08:46 PM

1. Place lengthwise inside a plastic transparent cylinder, hanging extended from a transversal pin through one of the tube's end's, engaging the "female" side of the beltplate. Stand the tube verticall on the opposite end.

2. Get a replica USN sword, hook it to the belt, put the sword in a vertical stand, and leave the belt hang vertically from same.

3. Within a long, shallow transparent acrylic box made and cut to order.

4. A 2D (card, foam, wood) board, painted and shaped like an union naval officer's jacket. Put it around it's waist.

5. Roll it, and place it within a transparent "hat box".

6. A a mannequin's torso

7. Connect both sides of the belt-plate. Place a small lifesaver, within the belt's confines, inflate and leave relatively tense.

8. Rolled around a replica naval officer's cap.

Quote:

Originally Posted by Dmitry

I'm looking for suggestions or displaying this belt in a way which would not harm the leather, at the same time having a full view of the two-piece belt plate.
Any ideas?
This is a US Navy officer's sword belt with a 1852 Regulation belt plate. I would date it ca.1852-1875.

Gavin Nugent · 30th January 2010, 01:08 AM

There are many framers could help you mount this behind glass in a rectangular framed display, I have done it with a number of knives. They use a very fine stainless wire that is coated in clear rubber, choose a nice regal colour for the back ground and a nice neutral and simple pewter coloured frame. See one example of the Dha attached where I have left a larger portion of matting to the bottom of the frame so I could add a brass description plate should I need too, the local engravers have these pretty cheap if you wanted to add this too.

Gav

Dmitry · 30th January 2010, 01:56 AM

Thanks for all of your suggestions! I don't collect belts as a topic, but I do have three belts that came with their respective swords. Ideally I would somehow display them on the mannequins, but space is a big consideration!!! I have none..

28th January 2010, 08:24 PM	#1
Dmitry Member Join Date: Jul 2009 Posts: 607	Displaying a belt - your suggestions.. I'm looking for suggestions or displaying this belt in a way which would not harm the leather, at the same time having a full view of the two-piece belt plate. Any ideas? This is a US Navy officer's sword belt with a 1852 Regulation belt plate. I would date it ca.1852-1875. Attached Images

29th January 2010, 07:33 PM	#3
fernando Lead Moderator European Armoury Join Date: Dec 2004 Location: Portugal Posts: 9,668	Or hanging it from a little (stilized) staff . Attached Images

30th January 2010, 01:08 AM	#6
Gavin Nugent Member Join Date: Oct 2007 Posts: 2,818	A simple long framed board mount There are many framers could help you mount this behind glass in a rectangular framed display, I have done it with a number of knives. They use a very fine stainless wire that is coated in clear rubber, choose a nice regal colour for the back ground and a nice neutral and simple pewter coloured frame. See one example of the Dha attached where I have left a larger portion of matting to the bottom of the frame so I could add a brass description plate should I need too, the local engravers have these pretty cheap if you wanted to add this too. Gav Attached Images

29th January 2010, 04:41 AM	#2
kahnjar1 Member Join Date: Aug 2007 Location: CHRISTCHURCH NEW ZEALAND Posts: 2,731	What about around some sort of cylinder. Perhaps a short piece of large diameter PVC pipe. Buckle fastened of course. Regards Stu

29th January 2010, 07:36 PM	#4
fernando Lead Moderator European Armoury Join Date: Dec 2004 Location: Portugal Posts: 9,668	BTW, do you collect military belts? Fernando

30th January 2010, 01:56 AM	#7
Dmitry Member Join Date: Jul 2009 Posts: 607	Thanks for all of your suggestions! I don't collect belts as a topic, but I do have three belts that came with their respective swords. Ideally I would somehow display them on the mannequins, but space is a big consideration!!! I have none..