9th February 2009, 05:29 PM | #31 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,957
|
Hi Miguel,
Pretty good job working on the translations, as if I am any authority ..I dont speak or read it either, but can sometimes cobble a general overview. Not sure about the pidgeon house thing All I know is in the 17th century, Palomares put together some boxed panels of illustrations of makers marks, then numerically labeled them. On the Conquistador book...the Osprey titles are great....work excellent for me with limited library space...and I just ordered 'The Conquistadors' by David Nicolle (also an Osprey title)...I just like Nicolle's work (my opinion, easy on the critical reviews everybody . We've really got a pretty good discussion going here, and I spent most of the day yesterday looking everywhere for info on Tizona and Colada, and think I'll put that on a different thread to see if we can get deeper into these two swords by that reference in the thread title. All the best, Jim |
9th February 2009, 08:55 PM | #32 | |
(deceased)
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
Quote:
I go one place and it says: Scimitar; i go another one and it says: cutlass. Apparently there is no strict translation. Likely this term never turned into english vocabulary. It seems as alfange is connected to Persian FAchar, or Urdu URchar, originated from the Arabic ARchar (Al khanjar); poping around through the Spano-Arab al-hangal ... pretended by others to be al-janyar (puñal?). If you go by the digestive description/definition, you fall into the bottomless well of the short, slightly curved wide blade sabres range which, in its widest interpretation, embraces the European falchion, fauchar, bracamarte, messer, storta, the Turc Kiliç, the Indian talwar, the Arab saif ... not to speak about their Spanish (Peninsular?) keen alfanjón, alfanjonazo and alfanjete; even the terciado (so much discussed in the kampilan thread) or the chafarote ... look at me, breathless . Maybe in a first aception you could consider the alfange a composite 'pattern', partly European and partly Oriental. Shorter but heavier than Oriental sabres, with a false edge that could well come from the longsax, the 'cutlass' or the falchion, generaly equiped with an 'S' guard, like the bracamarte, the messer and some late falchions. Beautyful specimens, like the one attached, were made and exported from renascent Venice ... the pieces you are looking for, Lorenz It is also written that the term alfanje (later alfange) was used in medieval Iberia to define Moorish curved swords, shorter and wider than scimitars; such being potentially the weapon used in the Muslim conquest of Penisula.. The alfanje is also cited by Cervantes in Don Quixote: "-Vos sois quien la necesita», respondió el manchego, y abrió la batalla con un tajo tan desmedido, que si el arma fuera un alfanje, allí quedara el portugués para la huesa" " ... and opened the battle with such an enormous slash that, if the weapon were a an alfanje, there would remain the portuguese for the grave" End of this unschooled chapter Fernando . |
|
9th February 2009, 11:25 PM | #33 | |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
Quote:
|
|
9th February 2009, 11:37 PM | #34 | |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
Quote:
|
|
10th February 2009, 03:26 AM | #35 |
Member
Join Date: Apr 2007
Location: Nothern Mexico
Posts: 458
|
Mmmm, Fer...I don´t believe the arabs of the conquest used any curved sword, but very late on the 15th Century. This venetian weapon I believe is a sttorta, and the longsax is a similar weapon, but maybe all of them are called "alfanjes" by the spaniards, so the word continues being ambiguos, and does not designates a precise and specific weapon. Seems a good sword to figh on the sea, by the way. Miguel de Cervantes fought against the turks in the maritime battle of Lepanto, where he lost a hand.
Regards Gonzalo |
10th February 2009, 04:52 AM | #36 |
Member
Join Date: Apr 2007
Location: Nothern Mexico
Posts: 458
|
As for the traslations, this is my free version:
For the first image LOOPS AND RINGS RAPIER Toledan End of the 16th Century Hilt: Loops and rings, chiselled with great mastery, with a truncated cone pommel resting over a rounded base, and then over a ferrule. Cylindrical hilt, deeply grooved in a spiral, straight guard quillons and polygonal block. The loops are made with three wires, the central one continues as a knuckleguard. The posterior part of the loops are united with the rings, which extends to the end of the recasso. A very armonic and well made work. Blade: Wide, diamond profile with a fuller in the first third. Double edged. And the next: LOOPS AND RINGS RAPIER Iohannes de la Horta Middle 16th Century Hilt: Loops and ring, italian style, and a little asymmetric in it´s development. Note the presence of only one quillon curved toward the point of the sword, only one wire directed to form the knuckleguard and a big loop which goes from the recasso to the cross in a subtle curvature. There are three loops over the recasso joining at the cross where the knuckleguard begins. Very pointed block. Pommel almost cylindrical, but rounded in it´s superior portion. Faceted hilt completely covered with brided wire among two ferules in the form of a "turk head" knot. All the elements are chiselled and damasquinated. Blade: Lenticular, double edged and fullered in the first third. Inscription: Stamped on the recasso with an "A", from Iohannes de la Horta swordmaker. Gonzalo |
10th February 2009, 05:06 AM | #37 | |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,957
|
Quote:
All best regards, Jim |
|
10th February 2009, 05:08 AM | #38 | |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,957
|
Quote:
Thanks Lorenz! I'm looking forward to developing that too. Kept me up most of the night thinking on it......curiouser and curiouser!!! Best regards, Jim |
|
10th February 2009, 03:07 PM | #39 | |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
Quote:
Thanks a million, Gonzalo |
|
10th February 2009, 03:17 PM | #40 | ||
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
Quote:
Quote:
Best regards! Lorenz =) |
||
10th February 2009, 03:31 PM | #41 |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
Maybe these excerpts from Medieval Swordsmanship will also help in the discussion:
|
10th February 2009, 03:35 PM | #42 |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
Here's the rest of the excerpts (in which only one page will be attached per post, as sometimes if the attachments are many per post, the sequence gets jumbled). So this would be page 2, and so forth, and so on:
|
10th February 2009, 03:35 PM | #43 |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
page 3:
|
10th February 2009, 03:36 PM | #44 |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
page 4:
|
10th February 2009, 03:37 PM | #45 |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
page 5:
|
10th February 2009, 03:37 PM | #46 |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
page 6:
|
10th February 2009, 03:39 PM | #47 |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
page 7:
|
10th February 2009, 03:39 PM | #48 |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
page 8:
|
10th February 2009, 03:40 PM | #49 |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
page 9:
|
10th February 2009, 03:41 PM | #50 |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
page 10 (last):
|
10th February 2009, 07:58 PM | #51 |
Member
Join Date: Oct 2007
Posts: 1,598
|
Hi,
European Hunting Cleavers usually part of a Trousse or set. First photo is German 15th Cent. the other two similar. Falchions possibly developed from earlier versions of these type of 'butchering' tools. Regards, Norman. |
10th February 2009, 08:16 PM | #52 |
Member
Join Date: Oct 2007
Posts: 1,598
|
Hi,
Another incarnation of the 'chopping' sword, Dussack, Tesak etc. Regards, Norman. |
11th February 2009, 12:09 AM | #53 |
Member
Join Date: Apr 2007
Location: Nothern Mexico
Posts: 458
|
Beautiful pieces, Norman, and your point of view is very interesting.
Regards Gonzalo |
11th February 2009, 01:51 AM | #54 | ||
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
Quote:
Quote:
Those are beautiful examples! Thanks for sharing those pics. And we can surely get a lot of insights merely by observing them (and marrying those observations to the earlier remarks of Fernando, Gonzalo, Jim, and Manuel). It appears to me then that in arming the ordinary warrior, whether in the West or in the East, the origin of his sword was that it must have come from a utilitarian civilian blade (a butcher's meat cleaver, a farmer's jungle 'bolo', etc.), that eventually found itself getting employed as a weapon (a falchion, a bracamarte, or in the case of the Igorots, the pinahig). Thanks again, Lorenz PS - Ward, where are those images you promised? [looks at watch] |
||
11th February 2009, 03:54 AM | #55 |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
Reviewing the info posted above on the falchion, the bracamarte, and the other cleavers and choppers, one cannot help but see a possible similarity in the evolution of certain ethnic Phil. swords.
For instance in the case of European swords, it was proposed that the falchion was an intermediate form (see att. below), and said falchion then eventually morphed into the cutlass, the saber, etc. As an aside, one wonders whether the original generic Phil. bolo when it became the pinahig or the binagong or the bangkung, were the equivalent of such intermediate form. And then (to continue the speculation) the Moros merely further pushed the envelope until they came up with the pira and the kampilan, for instance. [We can recall that Cato said that the bangkung is a much older form amongst the Moro blades.] Once again, these are my own "unschooled" musings Hopefully we get inputs from the experts, to either validate or refute this (wild) theory! But we are really talking here about European cutlasses and 16th century Spanish swords. So pardon me for the digression ... |
11th February 2009, 09:01 AM | #56 |
Member
Join Date: Apr 2007
Location: Nothern Mexico
Posts: 458
|
Neverthless, we must distinguish among straight blades with curved edges, from the curved blades...of course, also with curved edges. I think the weapon called alfanje had a curved blade, and according with Beraiz, also the scimitar. but in the case of the last one I feel not certainty.
Last edited by Gonzalo G; 12th February 2009 at 05:44 AM. |
12th February 2009, 02:41 AM | #57 | |
(deceased)
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
Hi Gonzalo
Quote:
Not that all such sources can be considered reliable, but some serious guy wrote that: ... in the combats following the 711 Arabic invasion, Asturians and Leonese used their (straight) swords of Roman tradition, in contrast to Persians and Arabs that exhibited the recurved models of their country of origin. In a context that: ... the type of swords used by the folks of the center and northern Peninsula, inherited from Roman civilization, of vertical disposition, short and solid, but lacking artistic attire, ended up being influenced by the aptitude and elegance of Muslim swords, at least in the upper parts (hilts...) by the hands of Mossarabs; this giving logic to specimens appeared by mid IX century, in Spain, Portugal and the Fench Midi, which development in European territory can not be denied. Fernando The pictures attached are not necessarily reliable. . |
|
12th February 2009, 03:07 AM | #58 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,957
|
Miguel, nicely done on the excellent work by Mr.Clements, those groupings of profiles really help in the discussion and looking at the development annd comparisons of types. Thank you for posting them for those of us who do not have this reference at hand.
Also, well placed digression to the Philippine versions of these, as it is always to see the widespread diffusion of many European influences into other cultures, and if none directly exists, the similarity regardless. Norman....(thinking of the 'Crocodile Dundee' cliche')..... ..now THATS a cleaver! and thank you for those dussacks, granddaddies of my favorite, the Scottish basket hilt. All best regards, Jim |
12th February 2009, 05:59 AM | #59 | |
Member
Join Date: Apr 2007
Location: Nothern Mexico
Posts: 458
|
Quote:
I also think that the most inmediate influence over the christian cavalry swords were not the roman swords, but the visigotic. Even the late roman cavalry sword, the spatha, is in great debt to the sword of the germanic peoples. Regards Gonzalo |
|
12th February 2009, 06:19 AM | #60 |
Member
Join Date: Apr 2007
Location: Nothern Mexico
Posts: 458
|
Jim, I don´t see any european influence there. Maybe even the machete is the result of the influence of the indonesian-phlippine over occidental weapons, isn´t it? At least, I can trace the ancestry of the machete among this eastern patterns, and not in the european arsenal. I don´t deny the mutual influences, but they are not something as the result of the "civilizing influence of Europe over the world." Philippines and Indonesia were first influenced by the indian and islamic cultures, but they never lost their local cultural identities.
|
|
|