Ethnographic Arms & Armour
 

Go Back   Ethnographic Arms & Armour > Discussion Forums > Ethnographic Weapons
FAQ Calendar Today's Posts Search

Reply
 
Thread Tools Search this Thread Display Modes
Old 12th July 2008, 06:40 PM   #1
chevalier
Member
 
Join Date: Jun 2008
Posts: 119
Default sword maintenence

does everyone use preservatives for their blades? ive been thinking about getting some linseed oil to coat mine with, as ive heard its enviromentally freindly.


what was/is "naval jelly"?

just curious as to what everyone uses for their own weapons upkeep.
chevalier is offline   Reply With Quote
Old 12th July 2008, 06:52 PM   #2
Rick
Vikingsword Staff
 
Rick's Avatar
 
Join Date: Nov 2004
Posts: 6,288
Thumbs up Oils Gather Dust

Rennaisance Wax .

Rick
Rick is offline   Reply With Quote
Old 12th July 2008, 07:05 PM   #3
Rich
Member
 
Rich's Avatar
 
Join Date: Dec 2004
Location: comfortably at home, USA
Posts: 432
Default

Ren wax for my non-Japanese items; choji oil for the Nihonto.
Simple 3 in 1 oil for some misc stuff.

DON"T USE NAVAL JELLY!! It is a gelatinized phosphoric acid -
it will eat you blades - literallly.

Rich S
Rich is offline   Reply With Quote
Old 12th July 2008, 07:09 PM   #4
Lew
(deceased)
 
Lew's Avatar
 
Join Date: Dec 2004
Location: East Coast USA
Posts: 3,191
Default

Yes wax is the way to go even a good car wax will do.

Lew
Lew is offline   Reply With Quote
Old 12th July 2008, 08:27 PM   #5
Atlantia
Member
 
Atlantia's Avatar
 
Join Date: Jun 2008
Location: The Sharp end
Posts: 2,928
Default

A steady dry enviroment is an obvious important factor. I find that a good rub with a light oiled cloth (not leaving the blade oily as it'll attract dust and airborne particles, just removing any hand grease) and my swords are generally fine. The big enemy is the inquisitive fingers of visiting friends. Someone with acidic sweat can leave a permernant corroded fingerprint in good steel overnight.

Rub the steel with newspaper to remove any grease or dirt, then a lightly oiled cloth, then a clean cloth.
Atlantia is offline   Reply With Quote
Old 12th July 2008, 11:22 PM   #6
ward
Member
 
Join Date: Feb 2006
Posts: 637
Default

I have seen more sword blades and chain mail trashed with navel jelly than anything else.Rennaisance Wax is very good but expensive. A cheaper alternative is butcher's bowling alley wax. linseed oil never dries and collects dust.
ward is offline   Reply With Quote
Old 13th July 2008, 08:43 AM   #7
Chris Evans
Member
 
Join Date: Mar 2005
Location: Australia
Posts: 675
Default

Quote:
Originally Posted by chevalier
does everyone use preservatives for their blades? ive been thinking about getting some linseed oil to coat mine with, as ive heard its enviromentally freindly.


what was/is "naval jelly"?

just curious as to what everyone uses for their own weapons upkeep.
I have been using lanolin grease with good results. Not too expensive.

Cheers
Chris
Chris Evans is offline   Reply With Quote
Old 13th July 2008, 09:14 PM   #8
kronckew
Member
 
kronckew's Avatar
 
Join Date: Mar 2006
Location: Room 101, Glos. UK
Posts: 4,171
Default

mineral oil is good for just about everything, discolors leather tho. is food safe if used on every day knives, camellia oil is also good i hear, but i can't find any in bulk here in gloucestershire. i generally wipe everything down once a month. i generally wipe wood down with a few coats of virgin olive oil, i does dry after a while. lanolin is good for horn grips. ballistol is good for steel, wood, leather but discolors brass. it's also edible. i've used paste waxes before but gravitate back to mineral oil.

naval jelly as above is nasty stuff, keep it at least a mile from any weapon. fine for eating the rust off 12" armour plate on a battleship, but has no place for anyone who posts here. do not flush down the drains either unless you want a big plumbing bill....
kronckew is offline   Reply With Quote
Old 13th July 2008, 09:27 PM   #9
Lew
(deceased)
 
Lew's Avatar
 
Join Date: Dec 2004
Location: East Coast USA
Posts: 3,191
Default

Ok

On pamored keris I use mineral oil mixed with jasmine on wootz I also use mineral oil if you use waxes on wootz there is a danger that the wax could strip the finish. For all others with cleaned light patina blades I use Bri-wax.

Jambiya=Briwax or Renaissance wax.

Keris=mineral oil

Axe with patina=Mineral oil

Wood=Briwax or Kiwi neutral paste shoe poliish sometimes brown to touch up badly weathered wood.

Horn=Renaissance wax or mineral oil very light coat wipe off after about 15-30 minutes.

Ivory=mineral oil. In the winter apply once every 6-8 weeks.
Attached Images
   

Last edited by LOUIEBLADES; 13th July 2008 at 09:41 PM.
Lew is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:24 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.