HELP!!! IS THIS TULWAR GOOD OR FAKE???

Flavio · 1st September 2006, 03:48 PM

Thank you Rick and Ariel. I'm happy if this isn't a fake!! Indeed the blade is quite heavy and the spine is also quite thick (45 mm). Moreover there is a false edge that in the 5 -6 cm near the point is sharp. What do you think if i clean the blade from the rust and than etch a little the blade, in order to see if there is at least a hardened edge?

katana · 1st September 2006, 04:12 PM

What a shame that any patina that was on the blade has been removed. I like the hilt, could it be alittle older than the blade...re-hilted?.
Seeing as the blade has probably been thoroughly cleaned

I suspect an etch would be on my 'to do list'

The comments on the scabbard are well founded.....looks alot more 'business-like' than my examples, ...very nice

B.I · 1st September 2006, 05:55 PM

tulwars hilts come in various different constructions, including a seam along the side, so i dont have a problem with it at all.
i would go along with ariels assessment in dating. the hilt is definately 'late' but this could mean end of 19th and well into the 20thC.
i had an identical blade on a sword, and i dont feel the markings a result of over-cleaning. i think the blade also is late, and with the shape, an attempt to replicate an earlier style. mine too had a look of being 'cut' out (no fullers) which definately bodes for a late date, possibly even later than the first half of the 20thC. mine too had the same scuffs along the blade.
the scabbard, as noted, has some age, and the way the bottom mount sits, i dont believe they went together.
but, i also dont believe this sword to be modern, so early to mid 20thC is a good guess.
an etch is a good idea, but dont get your hopes up. i didnt think mine could possibly be wootz from the overall look, and had it confirmed on a test.

Flavio · 1st September 2006, 06:01 PM

Thank you very much Brian. Wootz

at least i hope in an hardened edge. If i find it maybe i can considered this tulwar quite decent

Ah, the scabbard mounts fit in good way, but there is a sort of cut see pics.
Regards

FourBlades · 2nd September 2006, 12:11 AM

I am a new collector, can you describe the solution and procedure for etching a sword? I think I read that Keris are cleaned and etched using an arsenic/citric acid solution? I also realize that doing anything other than conservation to a good sword is usually not advised. If this has been covered before, maybe someone can point me to it.

Thanks,

John

Lew · 2nd September 2006, 02:20 AM

Quote:

Originally Posted by FourBlades

I am a new collector, can you describe the solution and procedure for etching a sword? I think I read that Keris are cleaned and etched using an arsenic/citric acid solution? I also realize that doing anything other than conservation to a good sword is usually not advised. If this has been covered before, maybe someone can point me to it.

Thanks,

John

Hi John

Your question does not fit into this thread? May I suggest you do a search on our forum and you will find threads on etching swords. Ferric chloride solution 3 parts water 1 Ferric chloride will do fine or you can use vinegar.

Lew

Flavio · 2nd September 2006, 12:40 PM

Ok, it's time to show you what i have found etching the blade. What do you see? i'm not sure, but first the semicircular sign it's very strange

on the rest of the blade seems to show a lamination or not?

Battara · 2nd September 2006, 07:39 PM

Quote:

Originally Posted by LOUIEBLADES

Hi John

Your question does not fit into this thread? May I suggest you do a search on our forum and you will find threads on etching swords. Ferric chloride solution 3 parts water 1 Ferric chloride will do fine or you can use vinegar.

Lew

Good adivice since different cultures used different acids for different color and etching effects.

1st September 2006, 06:01 PM	#4
Flavio Member Join Date: Dec 2004 Location: Italia Posts: 1,243	Thank you very much Brian. Wootz at least i hope in an hardened edge. If i find it maybe i can considered this tulwar quite decent Ah, the scabbard mounts fit in good way, but there is a sort of cut see pics. Regards Attached Images Last edited by Flavio; 1st September 2006 at 06:16 PM.

2nd September 2006, 12:11 AM	#5
FourBlades Member Join Date: Aug 2006 Location: Florida Posts: 13	Etching? I am a new collector, can you describe the solution and procedure for etching a sword? I think I read that Keris are cleaned and etched using an arsenic/citric acid solution? I also realize that doing anything other than conservation to a good sword is usually not advised. If this has been covered before, maybe someone can point me to it. Thanks, John

2nd September 2006, 12:40 PM	#7
Flavio Member Join Date: Dec 2004 Location: Italia Posts: 1,243	Ok, it's time to show you what i have found etching the blade. What do you see? i'm not sure, but first the semicircular sign it's very strange on the rest of the blade seems to show a lamination or not? Attached Images

1st September 2006, 03:48 PM	#1
Flavio Member Join Date: Dec 2004 Location: Italia Posts: 1,243	Thank you Rick and Ariel. I'm happy if this isn't a fake!! Indeed the blade is quite heavy and the spine is also quite thick (45 mm). Moreover there is a false edge that in the 5 -6 cm near the point is sharp. What do you think if i clean the blade from the rust and than etch a little the blade, in order to see if there is at least a hardened edge?

1st September 2006, 04:12 PM	#2
katana Member Join Date: Jan 2006 Location: Kent Posts: 2,658	What a shame that any patina that was on the blade has been removed. I like the hilt, could it be alittle older than the blade...re-hilted?. Seeing as the blade has probably been thoroughly cleaned I suspect an etch would be on my 'to do list' The comments on the scabbard are well founded.....looks alot more 'business-like' than my examples, ...very nice

1st September 2006, 05:55 PM	#3
B.I Member Join Date: Jan 2005 Posts: 485	tulwars hilts come in various different constructions, including a seam along the side, so i dont have a problem with it at all. i would go along with ariels assessment in dating. the hilt is definately 'late' but this could mean end of 19th and well into the 20thC. i had an identical blade on a sword, and i dont feel the markings a result of over-cleaning. i think the blade also is late, and with the shape, an attempt to replicate an earlier style. mine too had a look of being 'cut' out (no fullers) which definately bodes for a late date, possibly even later than the first half of the 20thC. mine too had the same scuffs along the blade. the scabbard, as noted, has some age, and the way the bottom mount sits, i dont believe they went together. but, i also dont believe this sword to be modern, so early to mid 20thC is a good guess. an etch is a good idea, but dont get your hopes up. i didnt think mine could possibly be wootz from the overall look, and had it confirmed on a test.