Late 17thC Scottish Broadsword.

[Norman McCormick]

Originally Posted by urbanspaceman

BTW
There is an adhesive that will effectively cold-weld your bits together Norman: it is sold in auto accessories shops. I have found it quite remarkable.

Hi Urbanspaceman,
Do you mean cold epoxy weld, there are several varieties,
is there a specific one best for this type of job? I did think of a bronze/brass braze
as this was a method used to join metal sections in the 18thC. e.g. steel scabbards and then there is the modern weld and try to disguise the fact. Of course the other method is to leave well alone and let the next incumbent resolve the issue. Many thanks for your interesting contribution re this sword.
My Regards,
Norman.

[urbanspaceman]

Hi Norman. Yes, cold epoxy weld is the stuff. It was some time ago when I last used this glue and I don't remember what make it was. I was not aware there were major differences but, as I say, it has been a while and maybe the success of the early products stimulated copycats. I would suggest after thorough de-greasing (alcohol) that you lightly brush the two surfaces with a soft wire brush and check for a good dry fit, then go ahead and glue.
My product dried to a mid to light grey colour which seems appropriate in this instance.
Hope this is of some help. Best regards, Keith.

[Norman McCormick]

Originally Posted by urbanspaceman

Hi Norman. Yes, cold epoxy weld is the stuff. It was some time ago when I last used this glue and I don't remember what make it was. I was not aware there were major differences but, as I say, it has been a while and maybe the success of the early products stimulated copycats. I would suggest after thorough de-greasing (alcohol) that you lightly brush the two surfaces with a soft wire brush and check for a good dry fit, then go ahead and glue.
My product dried to a mid to light grey colour which seems appropriate in this instance.
Hope this is of some help. Best regards, Keith.

Hi Keith,
Thanks for the further tips.
My Regards,
Norman.