Early 17th Century Scandinavian Gun Lock

[rickystl]

Hi Philip

I made an inquiry to him and asked if he has ANY other information on this lock, reference book, etc. I should here soon.

Yes, notice the sear bar is designed the same. But my lock doesn't have ANY provision for mounting a trigger at all. That's why I've started to think the lock was more of a styling exercise, and never expected to fire. But then, why the lock bolt holes/threads ? Duno LOL

Rick

[Philip]

Originally Posted by rickystl

Hi Philip

I made an inquiry to him and asked if he has ANY other information on this lock, reference book, etc. I should here soon.

Yes, notice the sear bar is designed the same. But my lock doesn't have ANY provision for mounting a trigger at all. That's why I've started to think the lock was more of a styling exercise, and never expected to fire. But then, why the lock bolt holes/threads ? Duno LOL

Rick

But wouldn't the trigger rotate on a pin through the wood of the stock and thus not have to be attached to the lock itself? This is the case with virtually all guns with locks held by bolts to the side of the stock. The only contact with the lock components is where the edge of the trigger pushes (or pulls) the sear arm.

[rickystl]

Hi Philip

Now that you mention it.......yes. The trigger itself may have just been pinned to the wood stock only. Could very well be the case.

The guy that sent me the pic above says he has more info. as soon as he gets a chance. It's his busy time of the year at the moment. Stay tuned.

It's certainly one of the more interesting locks in my collection.

Rick

[Raf]

The combined spring and primary sear is a feature of some of the earliest surviving Wheelock’s including of course Leonardo’s famous drawing. You are right that the trigger mechanism should be pinned to the stock otherwise it would not be possible to mount the lock in a functional firearm.
On the question of the spring locking of the rotating pan cover here is a Swedish lock of about 1630. There appears to be something going on with the mechanism on top of the pan cover which suggests a similar locking device. This is I think confirmed by Dell Mars description referring to 'a sprung swivelling fizzen '. From this one might infer that this (sensible) safety device was a feature of some early Baltic locks.

[Philip]

Originally Posted by Raf

The combined spring and primary sear is a feature of some of the earliest surviving Wheelock’s including of course Leonardo’s famous drawing. .

This combo function is also seen on the Spanish patilla lock (aka miquelet). Of course that type of lock has a half-cock safety so a notched stud that performs that function is attached to a secondary sear arm which is also engaged by the trigger to withdraw the primary sear from full cock.

Another interesting parallel to the patilla is the activation of the cock itself -- via upward pressure of the mainspring against a projection (likened to the heel of a foot, patilla meaning "little foot"). In turn, this same arrangement was used to power the serpentine of the Bohemian Schnapp-Lunte which was the basis for the so-called Indo-Portuguese snap matchlock introduced throughout East Asia in the 16th cent.