Riau-Bugis Keris and Hilt?

ganjawulung · 10th October 2011, 01:49 AM

And the whole warangka with blade and hilt...

ganjawulung · 10th October 2011, 01:51 AM

And with another Sulawesi Bugis, newly acquired couple while ago...

ganjawulung · 10th October 2011, 03:41 AM

This newly acquired Bugis has no 'buntut'...

Sajen · 10th October 2011, 05:51 PM

Quote:

Originally Posted by ganjawulung

And the whole warangka with blade and hilt...

Very nice keris in my opinion. The wood seems to have a nice grain but not good to seen under the dark paint. Do you have thought about to give it a new appearance? Look for example in the thread I have given before.

Regards,

Detlef

Laowang · 10th October 2011, 11:42 PM

Quote:

Originally Posted by Sajen

Very nice keris in my opinion. The wood seems to have a nice grain but not good to seen under the dark paint. Do you have thought about to give it a new appearance? Look for example in the thread I have given before.

Regards,

Detlef

I've been told by Adni of the Malay Art Gallery that the wood wrangkas of Sulawesi keris were often traditionally stained dark. I would advise against removing the stain, unless you are certain it was a change made to the wrangka outside of the original culture.

A. G. Maisey · 11th October 2011, 12:26 AM

Malay and Bugis keris are a bit outside my special area of knowledge, but I have owned a lot of them during my life.

I have noted that sometimes they have been varnished with black varnish, not paint, but a type of varnish that gives a very dark, or black finish.

Others I have had have had a normal brown varnish, but age and neglect had turned this varnish very dark to the point of almost black; these have been brought back to a good finish by polishing with car polish broken down with gum turpentine.

ganjawulung · 11th October 2011, 03:44 AM

@Detlef, thanks. Recently, I have a new "habitude": heavy-hearted to change the 'original' warangka condition, and let the keris' warangka as it is. Or, change totally with new warangka, and let the 'original' warangka stay as it is... So still no decision on this very black (the Sulawesi Bugis) one. But the first blackish one, I think the former owner had once removed the original black-stained varnish...
@Laowang, thanks for reminding me not to change immediately this blackish stained Bugis warangka. Cleaning it, maybe the best way, or change totally with new warangka, and keep the older warangka as it is...
@Alan, thanks also for the tips. It would be very useful for me to try some practical way to maintain my kerises cleaned. I have some practical way too, to use similar items such as car polish (we call it in Jawa, 'kompon', in green plastic cup, or white plastic for the soft one) to keep warangkas cleaned...

A. G. Maisey · 11th October 2011, 08:49 AM

Jimmy, I wouldn't use the car polish approach on everything, only on a piece of wood that has got really dirty deteriorated old varnish on it.

Fine quality furniture oils and waxes are possibly the best thing to maintain an already OK finish with. I grew up surrounded by and working with fine furniture, and I always think of keris dress in the same way as I do any other finely finished piece of wood. The medium you choose to maintain the finish should be selected in accord with the nature of the finish itself. One product does not suit everything.

Prevention is the best medicine, so it is really advisable to not store the keris in the wrongko, but rather in a plastic sleeve, and to store the wrongko in a singap, and the singap in a cupboard or drawer.

ganjawulung · 11th October 2011, 01:04 PM

I use car polish -- not the soft one -- specially for new warangka, in order to make the new varnish not to shiny. Then, use soft cloth. The new varnish will not look too glossy any more..

For old warangkas, usually I only use soft cloth to clean them...

10th October 2011, 01:49 AM	#1
ganjawulung Member Join Date: May 2007 Location: J a k a r t a Posts: 991	And the whole warangka with blade and hilt... Attached Images

10th October 2011, 01:51 AM	#2
ganjawulung Member Join Date: May 2007 Location: J a k a r t a Posts: 991	And with another Sulawesi Bugis, newly acquired couple while ago... Attached Images

10th October 2011, 03:41 AM	#3
ganjawulung Member Join Date: May 2007 Location: J a k a r t a Posts: 991	This newly acquired Bugis has no 'buntut'... Attached Images

11th October 2011, 12:26 AM	#6
A. G. Maisey Member Join Date: May 2006 Posts: 6,991	Malay and Bugis keris are a bit outside my special area of knowledge, but I have owned a lot of them during my life. I have noted that sometimes they have been varnished with black varnish, not paint, but a type of varnish that gives a very dark, or black finish. Others I have had have had a normal brown varnish, but age and neglect had turned this varnish very dark to the point of almost black; these have been brought back to a good finish by polishing with car polish broken down with gum turpentine.

11th October 2011, 03:44 AM	#7
ganjawulung Member Join Date: May 2007 Location: J a k a r t a Posts: 991	@Detlef, thanks. Recently, I have a new "habitude": heavy-hearted to change the 'original' warangka condition, and let the keris' warangka as it is. Or, change totally with new warangka, and let the 'original' warangka stay as it is... So still no decision on this very black (the Sulawesi Bugis) one. But the first blackish one, I think the former owner had once removed the original black-stained varnish... @Laowang, thanks for reminding me not to change immediately this blackish stained Bugis warangka. Cleaning it, maybe the best way, or change totally with new warangka, and keep the older warangka as it is... @Alan, thanks also for the tips. It would be very useful for me to try some practical way to maintain my kerises cleaned. I have some practical way too, to use similar items such as car polish (we call it in Jawa, 'kompon', in green plastic cup, or white plastic for the soft one) to keep warangkas cleaned...

11th October 2011, 08:49 AM	#8
A. G. Maisey Member Join Date: May 2006 Posts: 6,991	Jimmy, I wouldn't use the car polish approach on everything, only on a piece of wood that has got really dirty deteriorated old varnish on it. Fine quality furniture oils and waxes are possibly the best thing to maintain an already OK finish with. I grew up surrounded by and working with fine furniture, and I always think of keris dress in the same way as I do any other finely finished piece of wood. The medium you choose to maintain the finish should be selected in accord with the nature of the finish itself. One product does not suit everything. Prevention is the best medicine, so it is really advisable to not store the keris in the wrongko, but rather in a plastic sleeve, and to store the wrongko in a singap, and the singap in a cupboard or drawer.

11th October 2011, 01:04 PM	#9
ganjawulung Member Join Date: May 2007 Location: J a k a r t a Posts: 991	I use car polish -- not the soft one -- specially for new warangka, in order to make the new varnish not to shiny. Then, use soft cloth. The new varnish will not look too glossy any more.. For old warangkas, usually I only use soft cloth to clean them...