blade

galvano · 16th April 2007, 06:03 PM

hi
Two old blades.
Origin?
Your opinion.
Thank you.
galvano

ariel · 16th April 2007, 09:29 PM

The blades look like Palestinian Shibriyas. How big are they?
Very peculiar...

galvano · 16th April 2007, 10:00 PM

Overall length 23 cm .
jordan ?
thank
galvano

spiral · 16th April 2007, 10:27 PM

Jordan,Israel,Palestine,Syria type area.

Spiral

katana · 16th April 2007, 10:30 PM

I have seen blades very similar to these , I'm afraid there is a possibillity that these are from an agricultural cutting machine or similar (combine harvester ?) ...they also had the 3 rivet holes

spiral · 16th April 2007, 10:34 PM

Any pix or links katana?

Spiral

katana · 16th April 2007, 10:56 PM

Hi Spiral,
I saw some similar to these at an auction....I thought they were unusual blades...because of the three 'fixing holes'. Luckily a 'farmer type' informed me they were 'cutters' from a farm machine.
I saw 3 'ethnic spearheads' on eBay, recently, with the same rivet hole pattern...but not with curved blades (long tapering triangle)....but these had remnants of green paint

I could be totally wrong about these....but the wear marks around the rivet holes suggests great force elongated the holes and ripped the rivets out....

Regards David

ariel · 17th April 2007, 12:13 AM

Come to think of it, you might be right: there still is a big lug nut in one of the holes. Where is the handle it was attached to?

tom hyle · 23rd April 2007, 08:30 PM

I'd really like to see these industrial/powered blades that are being discussed. THese look like shabrias; an awful lot like shabrias. The holes appear, BTW, to have been hand-punched, not drilled, and this is responsible for the ridgelike formation around them. Note the marks at the blade base of the one which still contains a rivet (? does not look like a bolt to me?), and its hand forged shoulders. The other seems to have a groove running out the end of its handle; trick of the light? Corrosion?
The cross-section seems to be flattened diamond with rather fine edges, judging from the damage?

katana · 23rd April 2007, 09:05 PM

Quote:

Originally Posted by katana

.....a possibillity that these are from an agricultural cutting machine or similar (combine harvester ?) ...they also had the 3 rivet holes

Quote:

Originally Posted by katana

I could be totally wrong about these....but the wear marks around the rivet holes suggests great force elongated the holes and ripped the rivets out....

Regards David

Quote:

Originally Posted by tom hyle

Note the marks at the blade base of the one which still contains a rivet (? does not look like a bolt to me?),

EDITED Sorry Tom I have just realised you were refering to a bolt mentioned in another post on this subject.

The missing 'tang' appears to have been 'sheared' off .....a lot of force would be required to have done this...

16th April 2007, 06:03 PM	#1
galvano Member Join Date: Jan 2006 Posts: 178	blade hi Two old blades. Origin? Your opinion. Thank you. galvano Attached Images

16th April 2007, 10:00 PM	#3
galvano Member Join Date: Jan 2006 Posts: 178	hello Ariel Overall length 23 cm . jordan ? thank galvano

16th April 2007, 09:29 PM	#2
ariel Member Join Date: Dec 2004 Location: Ann Arbor, MI Posts: 5,503	The blades look like Palestinian Shibriyas. How big are they? Very peculiar...

16th April 2007, 10:27 PM	#4
spiral Member Join Date: Dec 2004 Posts: 1,712	Jordan,Israel,Palestine,Syria type area. Spiral

16th April 2007, 10:30 PM	#5
katana Member Join Date: Jan 2006 Location: Kent Posts: 2,658	I have seen blades very similar to these , I'm afraid there is a possibillity that these are from an agricultural cutting machine or similar (combine harvester ?) ...they also had the 3 rivet holes

16th April 2007, 10:34 PM	#6
spiral Member Join Date: Dec 2004 Posts: 1,712	Any pix or links katana? Spiral

16th April 2007, 10:56 PM	#7
katana Member Join Date: Jan 2006 Location: Kent Posts: 2,658	Hi Spiral, I saw some similar to these at an auction....I thought they were unusual blades...because of the three 'fixing holes'. Luckily a 'farmer type' informed me they were 'cutters' from a farm machine. I saw 3 'ethnic spearheads' on eBay, recently, with the same rivet hole pattern...but not with curved blades (long tapering triangle)....but these had remnants of green paint I could be totally wrong about these....but the wear marks around the rivet holes suggests great force elongated the holes and ripped the rivets out.... Regards David

17th April 2007, 12:13 AM	#8
ariel Member Join Date: Dec 2004 Location: Ann Arbor, MI Posts: 5,503	Come to think of it, you might be right: there still is a big lug nut in one of the holes. Where is the handle it was attached to?

23rd April 2007, 08:30 PM	#9
tom hyle Member Join Date: Dec 2004 Location: Houston, TX, USA Posts: 1,254	I'd really like to see these industrial/powered blades that are being discussed. THese look like shabrias; an awful lot like shabrias. The holes appear, BTW, to have been hand-punched, not drilled, and this is responsible for the ridgelike formation around them. Note the marks at the blade base of the one which still contains a rivet (? does not look like a bolt to me?), and its hand forged shoulders. The other seems to have a groove running out the end of its handle; trick of the light? Corrosion? The cross-section seems to be flattened diamond with rather fine edges, judging from the damage?