Mandau for review

Clubs & Arrows · 28th January 2012, 05:35 PM

Hello.
I recently purchased this Mandau at a local auction, and was wondering if anyone could help with approximate age, or if it is a dance piece vs a functional sword. The blade has shallow designs along the top edge, and several piercings, some of which appear to have inlaid brass dots in them. It is fairly sharp and thick as well. I know that the blade could use a bit of cleaning, and that the small blade is gone from the back, but that's about the extent of my knowledge about this piece. Any help on this would be appreciated.

Thank you,
Joe

PS: Any idea on how to repair/replace the missing section of resinous material at the hilt, or is it better off left as is?

Clubs & Arrows · 28th January 2012, 05:38 PM

more pics

VANDOO · 28th January 2012, 10:49 PM

IT LOOKS LIKE A GOOD OLD EXAMPLE TO ME DEFINITELY NOT A TOURIST ITEM. THE SWORD AND HANDLE MAY BE OLDER THAN THE SCABBARD BUT THAT IS NOT UNUSUAL OR A PROBLEM. THE SCABBARD IS WELL CARVED WITH WHAT IS REFERRED TO AS THE LEACH DESIGN. I AM NOT SURE WHAT THE CARVED DEER ANTLER PIECE ON THE SCABBARD IS FOR.?
I HAVE HEARD OF THE FERRULE BEING MADE OF WILD BEES WAX BUT YOUR EXAMPLE LOOKS MORE LIKE SOME SORT OF PLANT RESIN. THERE SHOULD BE SOME OLD POSTS IN THE ARCHIVES DISCUSSING BEES WAX FERRULES ON MANDAU. LOOKS LIKE A KEEPER TO ME BUT IT DOES NEED SOME TENDER LOVING CARE ESPECIALLY THE BLADE.

HOPEFULLY SOMEONE MUCH MORE KNOWLEGABLE THAN I ABOUT THINGS DAYAK CAN GIVE MORE AND BETTER INFORMATION. GOOD LUCK

asomotif · 30th January 2012, 12:32 AM

Hello Joe,

A very nice mandau. surely for real use and not a "dance sword"
Although the owner could have performed dances with it.

I think the ensemble is all matching in age.
I like the little antler carving at the shoulder of the scabbard. although it is attached in a weird way.
Maybe it has been bigger in the past ?

I would love to see the blade in a slightly cleaner state.

As for the resin at the handle.
Here is a thread giving some info.
But in this case you could also leave it, as part is still there and it is difficult to get the same texture of resin.

http://www.vikingsword.com/vb/showth...t=mandau+resin

Clubs & Arrows · 30th January 2012, 04:47 PM

Vandoo & Asomotif,
Thank you both for your information. I normally stick with Pacific Island clubs, but this was included in a boxlot along with New Guinea pieces. I'll get some pics loaded here of the Mandau a little cleaned up.

Thanks again to both of you for your help.

Joe

Indianajones · 31st January 2012, 09:25 PM

Hi Joe, a very very nice Iban mandau! The handle may not be very 'fancy' with faces and everything but the whole sword n scabbard are very old -I would estimate 1870 maybe even older.
Seen the leeches pattern on the scabbard it originates from the Iban dayak of Sarawak (Malaysian part of Borneo) and those many smaller brass points inset in the blade near the handle I have seen in many swords originating in an area closer to Sabah; Murut-tribe.
Therefore I would bet my money this mandau comes from the Baramriver-area Iban Dajak.

Love the scabbard, n nice piece of twirly carved deerhorn on side, openworked blade . . . .AAAHH!
If the sword was mine I would just put some woodglue (watered down perhaps) on the brittle resinpart of the handle and respectfully clean the blade (remove rust). Oh and brush off the dust . . .but am sure you done that already

.
Good luck n enjoy

Maurice · 31st January 2012, 09:38 PM

Area Between the Baram river and upper Redjang in Sarawak according to me.
I vote for Kayan tribe.

Maurice

28th January 2012, 05:35 PM	#1
Clubs & Arrows Member Join Date: Sep 2008 Location: San Gabriel Foothills, Southern California Posts: 94	Mandau for review Hello. I recently purchased this Mandau at a local auction, and was wondering if anyone could help with approximate age, or if it is a dance piece vs a functional sword. The blade has shallow designs along the top edge, and several piercings, some of which appear to have inlaid brass dots in them. It is fairly sharp and thick as well. I know that the blade could use a bit of cleaning, and that the small blade is gone from the back, but that's about the extent of my knowledge about this piece. Any help on this would be appreciated. Thank you, Joe PS: Any idea on how to repair/replace the missing section of resinous material at the hilt, or is it better off left as is? Attached Images

28th January 2012, 05:38 PM	#2
Clubs & Arrows Member Join Date: Sep 2008 Location: San Gabriel Foothills, Southern California Posts: 94	more pics Attached Images

31st January 2012, 09:38 PM	#7
Maurice Member Join Date: Jan 2007 Location: The Netherlands Posts: 1,352	Area Between the Baram river and upper Redjang in Sarawak according to me. I vote for Kayan tribe. Maurice Last edited by Maurice; 31st January 2012 at 09:53 PM.

28th January 2012, 10:49 PM	#3
VANDOO (deceased) Join Date: Dec 2004 Location: OKLAHOMA, USA Posts: 3,138	IT LOOKS LIKE A GOOD OLD EXAMPLE TO ME DEFINITELY NOT A TOURIST ITEM. THE SWORD AND HANDLE MAY BE OLDER THAN THE SCABBARD BUT THAT IS NOT UNUSUAL OR A PROBLEM. THE SCABBARD IS WELL CARVED WITH WHAT IS REFERRED TO AS THE LEACH DESIGN. I AM NOT SURE WHAT THE CARVED DEER ANTLER PIECE ON THE SCABBARD IS FOR.? I HAVE HEARD OF THE FERRULE BEING MADE OF WILD BEES WAX BUT YOUR EXAMPLE LOOKS MORE LIKE SOME SORT OF PLANT RESIN. THERE SHOULD BE SOME OLD POSTS IN THE ARCHIVES DISCUSSING BEES WAX FERRULES ON MANDAU. LOOKS LIKE A KEEPER TO ME BUT IT DOES NEED SOME TENDER LOVING CARE ESPECIALLY THE BLADE. HOPEFULLY SOMEONE MUCH MORE KNOWLEGABLE THAN I ABOUT THINGS DAYAK CAN GIVE MORE AND BETTER INFORMATION. GOOD LUCK

30th January 2012, 12:32 AM	#4
asomotif Member Join Date: Nov 2006 Location: The Netherlands Posts: 2,225	Hello Joe, A very nice mandau. surely for real use and not a "dance sword" Although the owner could have performed dances with it. I think the ensemble is all matching in age. I like the little antler carving at the shoulder of the scabbard. although it is attached in a weird way. Maybe it has been bigger in the past ? I would love to see the blade in a slightly cleaner state. As for the resin at the handle. Here is a thread giving some info. But in this case you could also leave it, as part is still there and it is difficult to get the same texture of resin. http://www.vikingsword.com/vb/showth...t=mandau+resin

30th January 2012, 04:47 PM	#5
Clubs & Arrows Member Join Date: Sep 2008 Location: San Gabriel Foothills, Southern California Posts: 94	Vandoo & Asomotif, Thank you both for your information. I normally stick with Pacific Island clubs, but this was included in a boxlot along with New Guinea pieces. I'll get some pics loaded here of the Mandau a little cleaned up. Thanks again to both of you for your help. Joe

31st January 2012, 09:25 PM	#6
Indianajones Member Join Date: Apr 2011 Posts: 180	Hi Joe, a very very nice Iban mandau! The handle may not be very 'fancy' with faces and everything but the whole sword n scabbard are very old -I would estimate 1870 maybe even older. Seen the leeches pattern on the scabbard it originates from the Iban dayak of Sarawak (Malaysian part of Borneo) and those many smaller brass points inset in the blade near the handle I have seen in many swords originating in an area closer to Sabah; Murut-tribe. Therefore I would bet my money this mandau comes from the Baramriver-area Iban Dajak. Love the scabbard, n nice piece of twirly carved deerhorn on side, openworked blade . . . .AAAHH! If the sword was mine I would just put some woodglue (watered down perhaps) on the brittle resinpart of the handle and respectfully clean the blade (remove rust). Oh and brush off the dust . . .but am sure you done that already . Good luck n enjoy