North African dagger?

Congoblades · 14th December 2006, 06:18 PM

I have this dagger, don't know where it's from, first tought was something like Touareg. I think it's not very old but looks nice. The blade have some strange "stripes", the hilt is made from red & yellow copper, wood and alluminium? It is 29 cm long and the blade is about 4-5mm thick, any coment is welcome, thanks.

Tim Simmons · 14th December 2006, 09:09 PM

A nice dagger. Surely western Sahara. It looks pre ww2. I have always assumed that aluminium was only widely used after the ww1 as that is when production really took off. I now feel certain that this metal was in use much earlier, the last half of the 19th cent. Especially when one looks at quality pieces which I believe this knife represents. Some people might argue that the use of this metal reflects an art deco influence. I feel the use is more related to luxury, rather than chrome and futurism. Therefore from an earlier epoch. What a shame it is missing a scabbard. Not every piece with aluminium will be old I might add.

Tim Simmons · 14th December 2006, 10:13 PM

I also think, that although this dagger originates from north of the equator it is not North African. In my opinion it is from the southern part of the Sahara, the Sahel and quite old. The French were one of the first to promote the use of aluminium. The similarity with this Hausa hilt, the knobs in particular are too close to ignore, a wide spread phenomenon throughout this region.

katana · 14th December 2006, 11:13 PM

Wow.....very nice dagger Congoblades.

I have seen similar on eBay.....not as old as yours looks........but both were said to be Toureq. I think Tim might be onto something....many swords and knives from the North .....are described on eBay as Toureg..

..even when they are clearly Baja, Hausa etc

Congoblades · 15th December 2006, 06:15 PM

Thanks Tim and Katana. Tim, the knobs are indeed close to your knive. I have not much experience with such kind of knives, I have one wich is a more typical Toeareg knive (a recent and toeristic one) and I see some resemblances to, not in the knobs but more in general, the way it is made. Indeed a shame missing the scabbard, maybe it would be more clear to see where it is from

Greets, Guy

Congoblades · 15th December 2006, 06:19 PM

Quote:

Originally Posted by katana

....many swords and knives from the North .....are described on eBay as Toureg.. eg..

..even when they are clearly Baja, Hausa etc

Katana, you are absolutly right about that, it's better to be a bit suspicion for what is offered on ebay and do you some research... before

Tim Simmons · 15th December 2006, 06:33 PM

Hello Guy, have you got the book- Armes traditionnelles d'Afrique. {dagues,poignards,glaives,epees,tranchets et couperets} Approche regionale et classification technique, morphologique et esthetique. Tristan Arbousse Bastide. It is very good. It must be Toureg from the SW. I will post another knife latter. This could be a good thread.

Congoblades · 15th December 2006, 06:46 PM

Hi Tim, I don't have the book, if you say it is very good I will look after it, saw it already on a quick google search, it is not expensive so I will manage the get it

I will also post one more, little different but very nice, Toeareg knive later, it's not mine.

Tim Simmons · 15th December 2006, 07:56 PM

An extract from the afore mentioned book showing the foot print of Toureg style daggers. As can be seen at the southern and south eastern edges many other groups of people would have to be included. It will be hard to sort the sub groups out.

Emanuel · 16th December 2006, 01:35 AM

Hi,

There is one such dagger presently listed on eBay (I will post the link once it's finished) with a sheath very similar to that of some takuba. What's surprising is that these knives seem to be of high quality, they show fine craftsmanship, not like the cheap tourist trinkets. I wonder how old this style is...similar to the telek in some respects, but not quite a telek...I like it. The luxury, as Tim remarked, would indicate that it was made to be seen, not concealed like the telek.
What's also striking is how similar the features of this knife are to the Tuareg jewellery...the same profusion of stacked geometric figures. Art deco is aptly put.

Emanuel

Emanuel · 16th December 2006, 03:04 AM

Here is a snipet from a thread in the old forum "Report from Agadez" that I think concerns these daggers:

Quote:

In my earlier post concerning observations in Mali, I had mentioned the "heavy brass style" in Tuareg arms. I asked our guide, well traveled in the area, if he was aware of where it had originated from. He said that he was not. He also said that he believed it was possible that the worn gaudy edged weapons occasionally encountered may well have been made for tourists, but caught a local eye, and hence came to have a sort of legitimacy as an ethnographic edged weapon.

The picture is gone now, but perhaps our host Lee Jones could confirm whether his report concerns the knives above?

Emanuel

Congoblades · 18th December 2006, 08:21 PM

This is the other knife, it has simular decoration as the one above. This is mostly seen as a Foelbe knive (also known as Peul, Foelani, Felaata en Foela)?
But I still think this, and also the one obove, is more or less a touristic knife, well made but not for use, to blade is to weak for the real work

Tim Simmons · 18th December 2006, 09:47 PM

Just because the blade is not obviously blood thirsty does not mean it is made for tourists. This knife is no way a tourist piece. The blade is quite flexible and not immediately aggressive, given the light clothing worn in desert regions, I would take great pains to avoid being stab but such a weapon even if it has a large element of showiness.
The picture from "Waffen aus Zentral-Afrika" suggests Bornu which I favour, over the illustration from "Armes traditionnelles d'Afrique" Toureg origin. The latter book having illustrations of a great many other styles all attributed to Toureg. I think this is any area where a lot of research is yet to be done.

Congoblades · 18th December 2006, 10:11 PM

Tim, the examples you gave are indeed nice weapons, you can clearly see they are forged, the two I posted are not. I think that makes a difference.

Congoblades · 18th December 2006, 10:51 PM

One more Foelbe knife, same model but with a well forged blade and older. I have seen some more nicly made but with a poor blade cut of a plate of iron.

katana · 18th December 2006, 11:52 PM

Quote:

Originally Posted by Congoblades

Tim, the examples you gave are indeed nice weapons, you can clearly see they are forged, the two I posted are not. I think that makes a difference.

Hi Congoblades,
many functional knives can be produced by 'stock removal', many modern African blades are made from car 'leaf springs' ....a good source of carbon steel. This is then ground/ filed into shape......if a mechanical grinder is used ...you have to be careful not to overheat the steel (through heat build-up from the grinding process) otherwise the 'temper' of the steel is altered and 'softens' the steel. Many newer Takouba's have thin flexable blades ....which do not appear to be 'forged' ....and the fullers are 'ground' as well....but can be quite sharp. They could certainly wound an opponent who is wearing 'traditional' light clothing....as Tim has already pointed out.....

I have a old Hausa arm dagger, which has a very nicely tempered blade, thin with some "springy-ness", definately a 'user'....

14th December 2006, 06:18 PM	#1
Congoblades Member Join Date: Aug 2006 Location: Belgium Posts: 171	North African dagger? I have this dagger, don't know where it's from, first tought was something like Touareg. I think it's not very old but looks nice. The blade have some strange "stripes", the hilt is made from red & yellow copper, wood and alluminium? It is 29 cm long and the blade is about 4-5mm thick, any coment is welcome, thanks. Attached Images

14th December 2006, 10:13 PM	#3
Tim Simmons Member Join Date: Dec 2004 Location: What is still UK Posts: 5,806	I also think, that although this dagger originates from north of the equator it is not North African. In my opinion it is from the southern part of the Sahara, the Sahel and quite old. The French were one of the first to promote the use of aluminium. The similarity with this Hausa hilt, the knobs in particular are too close to ignore, a wide spread phenomenon throughout this region. Attached Images

15th December 2006, 06:15 PM	#5
Congoblades Member Join Date: Aug 2006 Location: Belgium Posts: 171	Thanks Tim and Katana. Tim, the knobs are indeed close to your knive. I have not much experience with such kind of knives, I have one wich is a more typical Toeareg knive (a recent and toeristic one) and I see some resemblances to, not in the knobs but more in general, the way it is made. Indeed a shame missing the scabbard, maybe it would be more clear to see where it is from Greets, Guy Attached Images

18th December 2006, 08:21 PM	#12
Congoblades Member Join Date: Aug 2006 Location: Belgium Posts: 171	This is the other knife, it has simular decoration as the one above. This is mostly seen as a Foelbe knive (also known as Peul, Foelani, Felaata en Foela)? But I still think this, and also the one obove, is more or less a touristic knife, well made but not for use, to blade is to weak for the real work Attached Images

18th December 2006, 10:51 PM	#15
Congoblades Member Join Date: Aug 2006 Location: Belgium Posts: 171	One more Foelbe knife, same model but with a well forged blade and older. I have seen some more nicly made but with a poor blade cut of a plate of iron. Attached Images

14th December 2006, 09:09 PM	#2
Tim Simmons Member Join Date: Dec 2004 Location: What is still UK Posts: 5,806	A nice dagger. Surely western Sahara. It looks pre ww2. I have always assumed that aluminium was only widely used after the ww1 as that is when production really took off. I now feel certain that this metal was in use much earlier, the last half of the 19th cent. Especially when one looks at quality pieces which I believe this knife represents. Some people might argue that the use of this metal reflects an art deco influence. I feel the use is more related to luxury, rather than chrome and futurism. Therefore from an earlier epoch. What a shame it is missing a scabbard. Not every piece with aluminium will be old I might add.

14th December 2006, 11:13 PM	#4
katana Member Join Date: Jan 2006 Location: Kent Posts: 2,653	Wow.....very nice dagger Congoblades. I have seen similar on eBay.....not as old as yours looks........but both were said to be Toureq. I think Tim might be onto something....many swords and knives from the North .....are described on eBay as Toureg.. ..even when they are clearly Baja, Hausa etc

15th December 2006, 06:33 PM	#7
Tim Simmons Member Join Date: Dec 2004 Location: What is still UK Posts: 5,806	Hello Guy, have you got the book- Armes traditionnelles d'Afrique. {dagues,poignards,glaives,epees,tranchets et couperets} Approche regionale et classification technique, morphologique et esthetique. Tristan Arbousse Bastide. It is very good. It must be Toureg from the SW. I will post another knife latter. This could be a good thread.

15th December 2006, 06:46 PM	#8
Congoblades Member Join Date: Aug 2006 Location: Belgium Posts: 171	Hi Tim, I don't have the book, if you say it is very good I will look after it, saw it already on a quick google search, it is not expensive so I will manage the get it I will also post one more, little different but very nice, Toeareg knive later, it's not mine.

15th December 2006, 07:56 PM	#9
Tim Simmons Member Join Date: Dec 2004 Location: What is still UK Posts: 5,806	An extract from the afore mentioned book showing the foot print of Toureg style daggers. As can be seen at the southern and south eastern edges many other groups of people would have to be included. It will be hard to sort the sub groups out.

16th December 2006, 01:35 AM	#10
Emanuel Member Join Date: Jul 2005 Location: Toronto, Canada Posts: 1,242	Hi, There is one such dagger presently listed on eBay (I will post the link once it's finished) with a sheath very similar to that of some takuba. What's surprising is that these knives seem to be of high quality, they show fine craftsmanship, not like the cheap tourist trinkets. I wonder how old this style is...similar to the telek in some respects, but not quite a telek...I like it. The luxury, as Tim remarked, would indicate that it was made to be seen, not concealed like the telek. What's also striking is how similar the features of this knife are to the Tuareg jewellery...the same profusion of stacked geometric figures. Art deco is aptly put. Emanuel

18th December 2006, 09:47 PM	#13
Tim Simmons Member Join Date: Dec 2004 Location: What is still UK Posts: 5,806	Just because the blade is not obviously blood thirsty does not mean it is made for tourists. This knife is no way a tourist piece. The blade is quite flexible and not immediately aggressive, given the light clothing worn in desert regions, I would take great pains to avoid being stab but such a weapon even if it has a large element of showiness. The picture from "Waffen aus Zentral-Afrika" suggests Bornu which I favour, over the illustration from "Armes traditionnelles d'Afrique" Toureg origin. The latter book having illustrations of a great many other styles all attributed to Toureg. I think this is any area where a lot of research is yet to be done.

18th December 2006, 10:11 PM	#14
Congoblades Member Join Date: Aug 2006 Location: Belgium Posts: 171	Tim, the examples you gave are indeed nice weapons, you can clearly see they are forged, the two I posted are not. I think that makes a difference.