37 inch Visayan Kris?

ShazamsLaw · 25th March 2019, 12:21 PM

I found this at an online auction, the description goes as"

"A mix of a Visayan Bolo and a Moro Kris? It is certainly of monstrous dimensions: 37 inches long (In scabbard). The blade is wavy, deadly sharp and ‘only’ 30 inches long (For comparison purposes it is shown below next to a rather big 20 inches blade Moro Kris). The handle is a Deity shaped carved from horn and the cross guard is steel. Wood scabbard bound with brass wires. Good condition. Few blackened spots on the blade. Cracks on the scabbard (But hold solid) and few of the brass wire bands are damaged and few missing. Very Unusual piece."

Robert · 26th March 2019, 12:02 AM

Quote:

As Posted By ShazamsLaw
I found this at an online auction, the description goes as

Are you saying that this piece is currently being offered for sale at auction? If so you will not only need to read the rules on posting photos, but especially those pertaining to items that are currently being offered for sale.

Robert

ShazamsLaw · 7th April 2019, 11:57 AM

Quote:

Originally Posted by Robert

Are you saying that this piece is currently being offered for sale at auction? If so you will not only need to read the rules on posting photos, but especially those pertaining to items that are currently being offered for sale.

Robert

Heres the actual picture of the kris itself. The description is on my previous post

mross · 9th April 2019, 08:43 PM

Is there pic of this? You have my curiosity up.

Aslan Paladin · 9th April 2019, 09:30 PM

I googled the description provided mross and I found that the sword was offered by Artzi http://oriental-arms.com/photos.php?id=1300

David · 9th April 2019, 11:03 PM

Interesting blade. I'd be interested in seeing how it feels in hand.
BUT...a wavy blade is a wavy blade. Some might call it a "flamboyant" blade. This is a very interesting sword, but it is certainly not a kris.

MaharlikaTimawa · 10th April 2019, 03:50 AM

What exactly makes it Visayan? I don't believe these types of groups made anything outside of tools as weapons....

Rick · 10th April 2019, 05:30 AM

It's not a Kris by any standard; if the blade was straight what would you call it?
Certainly not a Kris.

Ian · 10th April 2019, 09:12 AM

Shazam,

Your original post appears in Artzi's "sold items" section so you can show it here as it's not currently for sale.

The hilt of this sword is typical Visayan work from Panay, and the scabbard is consistent with that origin also. It is a flamboyant-bladed sword, but not similar to either a kris or keris in several key aspects, as others have noted already.

Ian

.

xasterix · 10th April 2019, 12:18 PM

Quote:

Originally Posted by Ian

Shazam,

Your original post appears in Artzi's "sold items" section so you can show it here as it's not currently for sale.

The hilt of this sword is typical Visayan work from Panay, and the scabbard is consistent with that origin also. It is a flamboyant-bladed sword, but not similar to either a kris or keris in several key aspects, as others have noted already.

Ian

.

Agreed with this. There is also a small version of this piece. Kris-like blades used to be spread throughout the archipelago.

mross · 10th April 2019, 04:11 PM

Quote:

Originally Posted by Aslan Paladin

I googled the description provided mross and I found that the sword was offered by Artzi http://oriental-arms.com/photos.php?id=1300

Thanks. Should have thought of that.

My curiosity has been sated.

MaharlikaTimawa · 17th April 2019, 05:28 AM

Quote:

Originally Posted by ShazamsLaw

I found this at an online auction, the description goes as"

"A mix of a Visayan Bolo and a Moro Kris? It is certainly of monstrous dimensions: 37 inches long (In scabbard). The blade is wavy, deadly sharp and ‘only’ 30 inches long (For comparison purposes it is shown below next to a rather big 20 inches blade Moro Kris). The handle is a Deity shaped carved from horn and the cross guard is steel. Wood scabbard bound with brass wires. Good condition. Few blackened spots on the blade. Cracks on the scabbard (But hold solid) and few of the brass wire bands are damaged and few missing. Very Unusual piece."

Shazam, nothing about the blade screams Visayan other than the scrabard and handle that they slapped on their, which is something they usually do with a lot of the better weapons they can get their hands but obviously can't make themselves. Even the moros were not capable of making swords on par with that of europe and its western colonies.

mross · 17th April 2019, 04:51 PM

Quote:

Originally Posted by MaharlikaTimawa

Shazam, nothing about the blade screams Visayan other than the scrabard and handle that they slapped on their, which is something they usually do with a lot of the better weapons they can get their hands but obviously can't make themselves. Even the moros were not capable of making swords on par with that of europe and its western colonies.

Reply respectfully disagree with that last sentence. I have and have seen blades that easily equal anything made in the similar time period, from any group. I also have a blade that from everything I have examined about is equal to many Japanese blades, minus the Nihonto type polish, as the Moro's did it different. The steel has the color qualities of Tamahagane.

Sajen · 17th April 2019, 05:51 PM

Quote:

Originally Posted by MaharlikaTimawa

Shazam, nothing about the blade screams Visayan other than the scrabard and handle that they slapped on their, ....

Have a look here: http://www.vikingsword.com/vb/showth...t=visayan+daga
Also not Visayan?

Regards,
Detlef

ashkenaz · 13th May 2019, 08:37 PM

What makes the blade obviously Visayan and original, in my opinion, is that the Kris Blade is straightly erected and aligned to the handle, as opposed to the Moro Kris. Kris's like this is something we see among Visayan and Luzon works but never beyond that.

Nobody on other regions of Asia makes a blade like that, not even Moros, let alone for some reason make one specifically for a few Visayans for no logical logistical reason behind it. Nor does it make sense for Moros to make blades for people we know they regularly raid.

So unfortunately for Maharlika, his narrative that "literally all blades in the Visayas is imported" is not true.

25th March 2019, 12:21 PM	#1
ShazamsLaw Member Join Date: May 2018 Location: USA Posts: 26	37 inch Visayan Kris? I found this at an online auction, the description goes as" "A mix of a Visayan Bolo and a Moro Kris? It is certainly of monstrous dimensions: 37 inches long (In scabbard). The blade is wavy, deadly sharp and ‘only’ 30 inches long (For comparison purposes it is shown below next to a rather big 20 inches blade Moro Kris). The handle is a Deity shaped carved from horn and the cross guard is steel. Wood scabbard bound with brass wires. Good condition. Few blackened spots on the blade. Cracks on the scabbard (But hold solid) and few of the brass wire bands are damaged and few missing. Very Unusual piece."

10th April 2019, 09:12 AM	#9
Ian Vikingsword Staff Join Date: Dec 2004 Location: The Aussie Bush Posts: 4,200	Shazam, Your original post appears in Artzi's "sold items" section so you can show it here as it's not currently for sale. The hilt of this sword is typical Visayan work from Panay, and the scabbard is consistent with that origin also. It is a flamboyant-bladed sword, but not similar to either a kris or keris in several key aspects, as others have noted already. Ian . Attached Images Last edited by Ian; 10th April 2019 at 11:22 AM.

13th May 2019, 08:37 PM	#15
ashkenaz Member Join Date: Nov 2017 Posts: 23	Opinion? What makes the blade obviously Visayan and original, in my opinion, is that the Kris Blade is straightly erected and aligned to the handle, as opposed to the Moro Kris. Kris's like this is something we see among Visayan and Luzon works but never beyond that. Nobody on other regions of Asia makes a blade like that, not even Moros, let alone for some reason make one specifically for a few Visayans for no logical logistical reason behind it. Nor does it make sense for Moros to make blades for people we know they regularly raid. So unfortunately for Maharlika, his narrative that "literally all blades in the Visayas is imported" is not true. Last edited by ashkenaz; 14th May 2019 at 08:20 AM.

9th April 2019, 08:43 PM	#4
mross Member Join Date: Jan 2005 Posts: 478	Is there pic of this? You have my curiosity up.

9th April 2019, 09:30 PM	#5
Aslan Paladin Member Join Date: Oct 2015 Location: Te Aroha, New Zealand Posts: 122	I googled the description provided mross and I found that the sword was offered by Artzi http://oriental-arms.com/photos.php?id=1300

9th April 2019, 11:03 PM	#6
David Keris forum moderator Join Date: Aug 2006 Location: Nova Scotia Posts: 7,123	Interesting blade. I'd be interested in seeing how it feels in hand. BUT...a wavy blade is a wavy blade. Some might call it a "flamboyant" blade. This is a very interesting sword, but it is certainly not a kris.

10th April 2019, 03:50 AM	#7
MaharlikaTimawa Member Join Date: Mar 2015 Posts: 33	What exactly makes it Visayan? I don't believe these types of groups made anything outside of tools as weapons....

10th April 2019, 05:30 AM	#8
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,293	It's not a Kris by any standard; if the blade was straight what would you call it? Certainly not a Kris.