Strange US CW Horstmann Artillery? Hanger?

celtan · 22nd February 2010, 06:27 PM

Hello guys,

Found this blade between my old acquisitions. I can't quite place it, have checked Peterson. Bezdek, Albaugh etc...

When I bought it, it was supposed to have been a "confederate" sword, albeit the Philadelphia manufacture mostly rules that out.

The interesting feature of this piece lies in the _solid hilt, pommel, grip and D-Guard_, something akin the french M1816 hanger. OTOH, it has a separate grip doubly-stranded wire, which is usually only seen when the grip is made of wood, or covered by either leather or fish skin.

The sword is beautifully made, well balanced and solid, its blade gorgeously covered with exquisite etchings. The importer's name quite clearly etched "W. H. Horstmann & Sons" , Philadelphia.

The knuckleguard seems to be decorated with a four leaf clover (Vermont's state flower). It could also conceivably be a mustard flower, or perhaps hydrangea/whipplevine aka "Philadelphus Lewisi" (Idaho's state flower). There are other four leaf flowers decorating the guard, and a five leaf flower on the quillion.

I have never seen another sword quite like it. Looks similar to a Horse Artillery M1852. Private order perhaps? Seems strange to see a gorgeous blade like it coupled to a relatively cheap solid brass hilt.

Any ideas ? Glen, Dmitri ?

Regards

Manuel Luis

Jim McDougall · 22nd February 2010, 08:21 PM

Hi Manolo,
As always you come up with some beautiful examples, and while I defer to the expertise of Dmitry and Glen on these U.S. swords, I just wanted to say it certainly looks like Peterson #108 to me. I know you've already checked this and I dont have Bezdek, but Peterson notes on p.119 that in the ordnance manuals of 1841 and 1850 the mounted artillery officers were to wear the same sabres as the enlisted troops of the light horse artillery M1840, but with ornamental gilt mountings.

This example surely seems much more ornate than most Civil War period officers sabres I've seen, especially with as you note, the hilt entirely cast.
The blade is if course from the well known Horstmann & Sons house in Philadelphia, the military outfitters who were in business long after the war.

While the simple stirrup hilt pattern of the M1840 light artillery sabres were known in both North and South, you're right, I doubt if the South had Philadelphia blades!!

Nice sword, looking forward to Dmitry and Glens comments

as always as they have stockpiled treasure troves of key notes on U.S. swords.

All the best,
Jim

celtan · 22nd February 2010, 08:46 PM

Hi Jim,

Yes, I agree with you, it was the only one found even remotely similar to our piece, but it has a leather and wood traditional grip, and the knuckle guard is differently designed.

OTOH, ours has a shorter blade, perhaps 10" less than the regular m1840. It is substantial, and yet comparatively dainty to the regular m1840. Our scabbard is black leather, with two supporting brass bands / rings.

A militia connotation? Irish Unit? I read in Bezdek that W.H. Horstmann did accept private orders, and that they got to make the swords themselves in their PA factory.

Best-est

M

Quote:

Originally Posted by Jim McDougall

Hi Manolo,
As always you come up with some beautiful examples, and while I defer to the expertise of Dmitry and Glen on these U.S. swords, I just wanted to say it certainly looks like Peterson #108 to me. I know you've already checked this and I dont have Bezdek, but Peterson notes on p.119 that in the ordnance manuals of 1841 and 1850 the mounted artillery officers were to wear the same sabres as the enlisted troops of the light horse artillery M1840, but with ornamental gilt mountings.

This example surely seems much more ornate than most Civil War period officers sabres I've seen, especially with as you note, the hilt entirely cast.
The blade is if course from the well known Horstmann & Sons house in Philadelphia, the military outfitters who were in business long after the war.

While the simple stirrup hilt pattern of the M1840 light artillery sabres were known in both North and South, you're right, I doubt if the South had Philadelphia blades!!

Nice sword, looking forward to Dmitry and Glens comments

as always as they have stockpiled treasure troves of key notes on U.S. swords.

All the best,
Jim

Dmitry · 22nd February 2010, 11:01 PM

Hello,
There is no consensus on these swords, but the common knowledge has it that they were assembled post-Civil War by Bannerman from existing surplus blades and the hilts that were newly-cast. There isn't a single example that definitively dates to CW. That's all I know about them. Hope that helps.

Jim McDougall · 22nd February 2010, 11:03 PM

Quote:

Originally Posted by celtan

Hi Jim,

Yes, I agree with you, it was the only one found even remotely similar to our piece, but it has a leather and wood traditional grip, and the knuckle guard is differently designed.

OTOH, ours has a shorter blade, perhaps 10" less than the regular m1840. It is substantial, and yet comparatively dainty to the regular m1840. Our scabbard is black leather, with two supporting brass bands / rings.

A militia connotation? Irish Unit? I read in Bezdek that W.H. Horstmann did accept private orders, and that they got to make the swords themselves in their PA factory.

Best-est

M

Hi Manolo,
I didnt notice that blade was shorter, but this is clearly a dress sword. The black leather scabbard would seem to support that and I think your special order suggestion is well placed.
I just opened the current "Man at Arms" magazine and in an unrelated article noted Horstmann's cast hilts. Perhaps special orders were indeed cast.

All best
Jim

celtan · 23rd February 2010, 12:08 AM

Hola Jim,

Thanks for giving me an excuse to visit Borders, drink a couple lattes, and browse the 'zines...!

: )

Best

Manolo

Quote:

Originally Posted by Jim McDougall

Hi Manolo,
I didnt notice that blade was shorter, but this is clearly a dress sword. The black leather scabbard would seem to support that and I think your special order suggestion is well placed.
I just opened the current "Man at Arms" magazine and in an unrelated article noted Horstmann's cast hilts. Perhaps special orders were indeed cast.

All best
Jim

celtan · 23rd February 2010, 12:12 AM

Hi Dmitry,

Thanks! Could you please guide me to some references, if possible? I'm aware that many of the things we learn are caught on the fly through our collector's experience, and are as valuable as the formal refs. But at least I could read something to bide my curiosity.

: )

Best regards

Manolo

Quote:

Originally Posted by Dmitry

Hello,
There is no consensus on these swords, but the common knowledge has it that they were assembled post-Civil War by Bannerman from existing surplus blades and the hilts that were newly-cast. There isn't a single example that definitively dates to CW. That's all I know about them. Hope that helps.

Dmitry · 23rd February 2010, 04:26 AM

PM with a link to more info sent.

celtan · 25th February 2010, 07:51 PM

Hi Guys,

Dmitry, thanks for the info, the hilt is identical. Regrettably, I haven't yet been able to find any info on the sword on the Bannerman's catalogs I have seen so far.

Jim, I haven't been able to find "Man at Arms" anywhere. Do you still remember what is it that was said of the Horstmann cast hilts?

Best regards

Manuel

Jim McDougall · 25th February 2010, 08:15 PM

Hi Manolo,
Actually it is in the current issue of "Man at Arms" Vol. 32, #1, p.11, in a discussion on a M1832 foot artillery sword (with neoclassic hilt in cast brass). The response to the question from John Thillman (author "Civil War Swords") notes "...more likely an Ames sword and not one with a Horstmann cast hilt having an imported blade".
I interpreted this as perhaps a suggestion that the Horstmann firm, which was indeed also a manufacturing firm beyond being simply a retailer, may have had the capacity to produce cast brass hilts. In another note it is also mentioned that there were instances where Ames made hilts for resale by retailers such as Horstmann leaving them unmarked, but that seems directed at these M1832 cast hilts.

All the best,
Jim

P.S.

Man at Arms
54 East School St.
Woonsocket , R.I. 02895 401-597-5055

22nd February 2010, 06:27 PM	#1
celtan Member Join Date: Sep 2008 Location: PR, USA Posts: 679	Strange US CW Horstmann Artillery? Hanger? Hello guys, Found this blade between my old acquisitions. I can't quite place it, have checked Peterson. Bezdek, Albaugh etc... When I bought it, it was supposed to have been a "confederate" sword, albeit the Philadelphia manufacture mostly rules that out. The interesting feature of this piece lies in the _solid hilt, pommel, grip and D-Guard_, something akin the french M1816 hanger. OTOH, it has a separate grip doubly-stranded wire, which is usually only seen when the grip is made of wood, or covered by either leather or fish skin. The sword is beautifully made, well balanced and solid, its blade gorgeously covered with exquisite etchings. The importer's name quite clearly etched "W. H. Horstmann & Sons" , Philadelphia. The knuckleguard seems to be decorated with a four leaf clover (Vermont's state flower). It could also conceivably be a mustard flower, or perhaps hydrangea/whipplevine aka "Philadelphus Lewisi" (Idaho's state flower). There are other four leaf flowers decorating the guard, and a five leaf flower on the quillion. I have never seen another sword quite like it. Looks similar to a Horse Artillery M1852. Private order perhaps? Seems strange to see a gorgeous blade like it coupled to a relatively cheap solid brass hilt. Any ideas ? Glen, Dmitri ? Regards Manuel Luis Last edited by celtan; 22nd February 2010 at 08:49 PM.

22nd February 2010, 08:21 PM	#2
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 9,951	Hi Manolo, As always you come up with some beautiful examples, and while I defer to the expertise of Dmitry and Glen on these U.S. swords, I just wanted to say it certainly looks like Peterson #108 to me. I know you've already checked this and I dont have Bezdek, but Peterson notes on p.119 that in the ordnance manuals of 1841 and 1850 the mounted artillery officers were to wear the same sabres as the enlisted troops of the light horse artillery M1840, but with ornamental gilt mountings. This example surely seems much more ornate than most Civil War period officers sabres I've seen, especially with as you note, the hilt entirely cast. The blade is if course from the well known Horstmann & Sons house in Philadelphia, the military outfitters who were in business long after the war. While the simple stirrup hilt pattern of the M1840 light artillery sabres were known in both North and South, you're right, I doubt if the South had Philadelphia blades!! Nice sword, looking forward to Dmitry and Glens comments as always as they have stockpiled treasure troves of key notes on U.S. swords. All the best, Jim

22nd February 2010, 11:01 PM	#4
Dmitry Member Join Date: Jul 2009 Posts: 607	Hello, There is no consensus on these swords, but the common knowledge has it that they were assembled post-Civil War by Bannerman from existing surplus blades and the hilts that were newly-cast. There isn't a single example that definitively dates to CW. That's all I know about them. Hope that helps.

23rd February 2010, 04:26 AM	#8
Dmitry Member Join Date: Jul 2009 Posts: 607	PM with a link to more info sent.

25th February 2010, 07:51 PM	#9
celtan Member Join Date: Sep 2008 Location: PR, USA Posts: 679	Hi Guys, Dmitry, thanks for the info, the hilt is identical. Regrettably, I haven't yet been able to find any info on the sword on the Bannerman's catalogs I have seen so far. Jim, I haven't been able to find "Man at Arms" anywhere. Do you still remember what is it that was said of the Horstmann cast hilts? Best regards Manuel

25th February 2010, 08:15 PM	#10
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 9,951	Hi Manolo, Actually it is in the current issue of "Man at Arms" Vol. 32, #1, p.11, in a discussion on a M1832 foot artillery sword (with neoclassic hilt in cast brass). The response to the question from John Thillman (author "Civil War Swords") notes "...more likely an Ames sword and not one with a Horstmann cast hilt having an imported blade". I interpreted this as perhaps a suggestion that the Horstmann firm, which was indeed also a manufacturing firm beyond being simply a retailer, may have had the capacity to produce cast brass hilts. In another note it is also mentioned that there were instances where Ames made hilts for resale by retailers such as Horstmann leaving them unmarked, but that seems directed at these M1832 cast hilts. All the best, Jim P.S. Man at Arms 54 East School St. Woonsocket , R.I. 02895 401-597-5055