antique kris renewed

h0ll0wman · 8th November 2021, 12:32 PM

I already partially restored this kris (blade only) and posted it in this forum a few months ago.I do not have the materials to restore the hilt and scabbard. Hence ,I sent it to Jolo for restoration. The handle was originally wrapped with rubber so I asked the artisan to replace it with silver wires. Upon removal of the rubber there was a green textile wrapped around the handle which I decided to retain. The stirrups and scabbard fittings are also replaced with silver.

Sajen · 8th November 2021, 06:10 PM

Looks much better as before also when I am not a fan of the green fabric.
But what disturbs the overall impression is the wooden pommel IMVHO.
It looks very dry, oil it with linseed oil and polish it with steel wool 000 and antik wax. It will be a nice wood but needs some care. Just my humble opinion.

Regards,
Detlef

Sajen · 8th November 2021, 06:12 PM

BTW, the same is guilty for the scabbard wood.

drac2k · 8th November 2021, 06:24 PM

Were the green fabric and the wire there originally, and if not what was was there before your cleaning?

kai · 8th November 2021, 08:10 PM

Quote:

Originally Posted by drac2k

Were the green fabric and the wire there originally, and if not what was was there before your cleaning?

See posting #1 and this thread: http://www.vikingsword.com/vb/showthread.php?t=27217

kai · 8th November 2021, 08:18 PM

I'd guess that the green fabric is about as old as the plastic tape.

The pommel does not seem to be banati/bunti wood; it certainly deserves some TLC as suggested.

Regards,
Kai

Sajen · 8th November 2021, 09:25 PM

Quote:

Originally Posted by kai

I'd guess that the green fabric is about as old as the plastic tape.

Hello Kai,
Agree. But we can't be sure without handling it.

Quote:

Originally Posted by kai

The pommel does not seem to be banati/bunti wood; it certainly deserves some TLC as suggested.

Agree again. It will be a wood like from this pommel in the picture. But it should look similar.

Regards,
Detlef

Sajen · 8th November 2021, 09:46 PM

Another non banti pommel.

h0ll0wman · 9th November 2021, 06:02 AM

Quote:

Originally Posted by Sajen

Looks much better as before also when I am not a fan of the green fabric.
But what disturbs the overall impression is the wooden pommel IMVHO.
It looks very dry, oil it with linseed oil and polish it with steel wool 000 and antik wax. It will be a nice wood but needs some care. Just my humble opinion.

Regards,
Detlef

thank you for the advice Detlef. I just applied linseed oil on the pommel and scabbard.

Sajen · 9th November 2021, 06:12 AM

Quote:

Originally Posted by h0ll0wman

thank you for the advice Detlef. I just applied linseed oil on the pommel and scabbard.

Let us see the result when the wood cure is finished.

CharlesS · 14th November 2021, 12:23 PM

There are some good suggestions here for the replacement of the green fabric. It is not terribly hard if you can find the right gauge of twine. You may have to paint and lacquer it once applied.

David · 15th November 2021, 04:35 PM

Quote:

Originally Posted by CharlesS

There are some good suggestions here for the replacement of the green fabric. It is not terribly hard if you can find the right gauge of twine. You may have to paint and lacquer it once applied.

I am still looking for some clear instructional guidance on how to do twine wrapping on kris hilts in a traditional and attractive manner. I don't want to simply wrap a piece of twine around a hilt. There are traditional braiding methods that i would like to replicate. Any leads on such instruction would be appreciated.

xasterix · 16th November 2021, 01:40 AM

I suggest trying a lighter etchant as well...so that the blade would not look burned. Here's an example I'm working on right now.

8th November 2021, 09:46 PM	#8
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 8,761	Another non banti pommel. Attached Images

16th November 2021, 01:40 AM	#13
xasterix Member Join Date: Oct 2018 Posts: 653	I suggest trying a lighter etchant as well...so that the blade would not look burned. Here's an example I'm working on right now. Attached Images

8th November 2021, 12:32 PM	#1
h0ll0wman Member Join Date: Jan 2021 Posts: 71	antique kris renewed I already partially restored this kris (blade only) and posted it in this forum a few months ago.I do not have the materials to restore the hilt and scabbard. Hence ,I sent it to Jolo for restoration. The handle was originally wrapped with rubber so I asked the artisan to replace it with silver wires. Upon removal of the rubber there was a green textile wrapped around the handle which I decided to retain. The stirrups and scabbard fittings are also replaced with silver. Attached Images

8th November 2021, 06:10 PM	#2
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 8,761	Looks much better as before also when I am not a fan of the green fabric. But what disturbs the overall impression is the wooden pommel IMVHO. It looks very dry, oil it with linseed oil and polish it with steel wool 000 and antik wax. It will be a nice wood but needs some care. Just my humble opinion. Regards, Detlef

8th November 2021, 06:12 PM	#3
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 8,761	BTW, the same is guilty for the scabbard wood.

8th November 2021, 06:24 PM	#4
drac2k Member Join Date: Jun 2013 Posts: 1,230	Were the green fabric and the wire there originally, and if not what was was there before your cleaning?

8th November 2021, 08:18 PM	#6
kai Member Join Date: Apr 2005 Posts: 3,254	I'd guess that the green fabric is about as old as the plastic tape. The pommel does not seem to be banati/bunti wood; it certainly deserves some TLC as suggested. Regards, Kai

14th November 2021, 12:23 PM	#11
CharlesS Member Join Date: Dec 2004 Location: Greenville, NC Posts: 1,857	There are some good suggestions here for the replacement of the green fabric. It is not terribly hard if you can find the right gauge of twine. You may have to paint and lacquer it once applied.