![]() |
|
![]() |
#1 |
Member
Join Date: Aug 2017
Location: North Queensland, Australia
Posts: 183
|
![]()
G'day Guys,
Jim, "The British Cavalry Sword from 1600" is the title of Charles Martyn's book, not the suggested date for this sword. I think a date of 1770-1780 is about right for my sword. Thanks for posting the photos of your swords. That basket hilt has the same style of blade as my sword and if you look closely at the photo, you can see it too has a scarf weld at the ricasso. IP, not being from Britain I am not sure what plant exactly this refers too, but had always assumed "Honeysuckle" was native to Britain? Is it common honeysuckle Lonicerum periclymenum? I am mainly going on what other authors had mentioned including Charles Martyn. Cheers, Bryce PS Actually looking at the photos again, all three swords have the same style of blade and the scarf weld is also showing on the 3rd sword. |
![]() |
![]() |
![]() |
#2 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,896
|
![]()
Thanks Bryce,missed that, it was the title.
Interesting on the scarf welds, what was the reason for this? and it seems pretty prevalent. I got Southwick, ("London Silver Hilted Swords", 2001) and these examples are I think pertinent. The first in one which corresponds to the lion head dragoon officer I posted. The next three (black & white) illustrate the 'scrolled' bar designs which seem to have a prevalence with outfitters for officers swords from about 1750s to 1780s including of course those presumed to be contenders for the pattern 1788 heavy cavalry examples. While these are clearly not exact match, they do show the general character of the form. Most of these scrolled bars seem simple, however yours is far more intricate incorporating baroque floral designs into the half basket pattern with the bars included. It would seem the cutlers were competing using innovative designs. I agree yours would likely be in the 1770s with that 'Adam' type pommel. I think I have seen a design like this too, but cannot place where it was. |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Aug 2017
Location: North Queensland, Australia
Posts: 183
|
![]()
G'day Jim,
Yes the scrolling bars are basically the same shape and may derive from honeysuckle as well or perhaps both represent something unrelated to honeysuckle? I am not sure who came up with the first honeysuckle label? The scarf welds appear to be quite common and I imagine it has something to do with an iron tang being less likely to break? Personally I have always thought that the ricasso is a bad place to place a weld and the smith would have to make damn sure that it is a very good weld. Cheers, Bryce |
![]() |
![]() |
![]() |
#4 | |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,896
|
![]() Quote:
It is hard to know exactly when this term came into descriptive use toward the hilts of these British swords, and as always Victorian descriptions in observations often brought in colorful romanticized terms. Honeysuckle apparently gained popular attention in those times pertaining to some superstitious beliefs, but the designs using the scrolled designs were already well in use in the second half 18th c. with late baroque styling. The first use of the term I know of personally was toward the hilt of the M1796 British heavy cavalry officers sword (undress) which also had the pierced 'ladder' design in the upper part of the pierced bowl. The term also referred to the similar hilt design of the heavy cavalry M1821/29 pattern. It is interesting that the heavy cavalry term was not known or used in the time of these dragoon officers swords we are discussing (1750s-80s) and in 1756 units of 'light' dragoons were created. In 1788, reorganizing of cavalry units was completed and the units of light dragoons (becoming light cavalry and hussars later) and the other units were termed 'dragoon guards' later heavy cavalry. What I had not realized is that there were no 'heavy cavalry' units in this period 1750-80 as such, so dragoon officers seem to have had pretty much 'carte blanche' in their selection of personal swords, as seen by the examples shown in our discussion. That is perhaps why the designation of '1788 heavy cavalry officers sword' is such an apocryphal designation. The lionhead example I posted has similar example in design shown in Southwick (a silver hilt) and noted Dru Drury as cutler.....while mine appears marketed by John Read, a Dublin outfitter, so it seems the designs were not limited to one cutler. In measuring the blade, it is 38" so in line with the very long blades of 'heavy dragoons' popular in 1760s-70s. On the blade, there are distinct marking upper part of blade near forte, an F and near it, what remains of a '3'. Hoping I can find what these might mean. The scarf welds you noticed are also a distinct curiosity, and I am with you, why would this be done at the join with the tang? There are certain swords in Oman which had longer tangs welded on because they were fitted with longer cylindrical hilts, but that does not seem the issue here. Also, these are remarkably long blades, so clearly not cut down. Pics are the M1796 heavy cavalry officers sword, and the M1829 heavy cavalry officers sword; both with termed 'honeysuckle hilts'. |
|
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Aug 2017
Location: North Queensland, Australia
Posts: 183
|
![]()
G'day Jim,
I wonder if hilts like mine may have helped inspire whoever came up with the 1796 ladder hilt design? Cheers, Bryce |
![]() |
![]() |
![]() |
#6 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,896
|
![]()
Hi Bryce,
It sure seems plausible in some degree, and hilt designs in certain categories might be similar structurally, but simple embellishments added or changed. In that period of the 18th century, it does seem the officers were extremely focused on fashion, and followed the styling found with the gentleman's small sword hilts , with many parallels in the forms. I think the silver hilts as shown in Southwick as a key reference illustrates well these design orientations. I think the more pragmatic designs in the troopers sabers on 1796 with simple strirrup hilt became embellished with simple added guard bars which became the M1821/1829 (production stalled c. 1825 with issues in both light and heavy troopers (bowl guard) versions). The officers sabers however remained as the M1822, also with three bar design. These added bars also formed the basis for the infantry officers saber hilt, which became later known as the 'gothic' hilt in the arms writer jargon in the same manner as 'honeysuckle' hilt probably in the same manner in the Victorian era. For me the hilt design motivations were always intriguing, and I recall the mysterious 'five ball hilt' of the infantry officer 'spadroons' of c. 1780 and the 'five ball hilt'. I got the notion that there might be a Masonic connection with the number five that might be subtly represented ( Freemasonry was pretty well established with officers and gentry of the period). When I discussed the idea with Robson, he politely suggested the idea as a bit 'fanciful' and that the design was simply 'aesthetic'. It seems that Blair and May approached these hilts in a article in JAAS (cant recall issue offhand) but could not describe a reliable source for the design. In further support of my 'Masonic' idea, there was a strong solidarity in Freemasonry between the British and French lodges which surmounted national or political disparities. In what appears a singular instance of the French adopting a design 'from' the British, they had hilts of this design which they termed l'Anglaise. My apologies for the tirade on hilt designs, just expounding a bit on some of my obsessions over the years ![]() |
![]() |
![]() |
![]() |
#7 |
Member
Join Date: Aug 2017
Location: North Queensland, Australia
Posts: 183
|
![]()
G'day Jim,
I have also wondered about Masonic connections with some sword decoration from the period. The 1796 ladder hilt in the comparison photo I posted above was sold in a Wallis and Wallis sale in 1972. It is described thus "pierced honeysuckle guard", so the term was in use at least as far back as that. Cheers, Bryce |
![]() |
![]() |
![]() |
#8 | |
Member
Join Date: Jul 2009
Location: Nipmuc USA
Posts: 496
|
![]() Quote:
There was a fellow in the U.S. named Pettibone and he submitted a patent re welding soft tangs to his cast steel billet blades. Everything is videos these days and I think Matt Easton's might be worth it but there are articles and discussion. Some claim the ricasso counter polish is to get close to the hilt. My opinion is that is, that obvious, a case of polishing out the welds. That's a great sword there Bryce! Cheers GC |
|
![]() |
![]() |
![]() |
|
|