Tagalog Bolo?

Sajen · 22nd December 2009, 08:00 PM

I just buy this philippine bolo by epray. Since I have read a lot in Filhistory from Migueldiaz (great page) I think I buy a Tagalog bolo, would be nice when you confirm this and can give me an estimated age of this small sword. It is 23 inch OA or 58,4 cm. Until now I don't have it in my hands and this is a picture from the seller. All comments are very appreciated.

sajen

Robert · 22nd December 2009, 08:16 PM

Hello Sajen,
IMHO by looking at the blade (it looks to be mono-steel) and the finish of the horse hoof style horn grip, the brass casting of the guard and the embossing on the leather sheath I would have to say that this piece is from WWII or later. I hope this is of some small help.

Robert

Sajen · 22nd December 2009, 08:22 PM

Quote:

Originally Posted by Robert Coleman

Hello Sajen,
IMHO by looking at the blade (it looks to be mono-steel) and the finish of the horse hoof style horn grip, the brass casting of the guard and the embossing on the leather sheath I would have to say that this piece is from WWII or later. I hope this is of some small help.

Robert

Hello Robert,

thank you for reply. This is what I have thought, but I am not so firm by blades from the Philippines.

Detlef

FilAmfighter1 · 22nd December 2009, 08:59 PM

Quote:

Originally Posted by Sajen

I just buy this philippine bolo by epray. Since I have read a lot in Filhistory from Migueldiaz (great page) I think I buy a Tagalog bolo, would be nice when you confirm this and can give me an estimated age of this small sword. It is 23 inch OA or 58,4 cm. Until now I don't have it in my hands and this is a picture from the seller. All comments are very appreciated.

sajen

This blade is a Post WW-2 Bolo, Espada pattern, I have one simular my mother-in-law gave me as wedding present. Your hilt is brass cast, and you leather sheath is most likely Carabo hide leather. It shows some usage which is alway good.
If anybody wants I can post a link for PDF magazine- special edition on Filipino Weapons A-Z so you have it for refference.

Sajen · 22nd December 2009, 09:28 PM

Quote:

Originally Posted by FilAmfighter1

This blade is a Post WW-2 Bolo, Espada pattern, I have one simular my mother-in-law gave me as wedding present. Your hilt is brass cast, and you leather sheath is most likely Carabo hide leather. It shows some usage which is alway good.
If anybody wants I can post a link for PDF magazine- special edition on Filipino Weapons A-Z so you have it for refference.

Thank you for comment and welcome to the forum. The link would be very interesting. You like to show us your bolo?

Regards,

Detlef

Rick · 22nd December 2009, 09:28 PM

Why not ?

Post away .

Here's what I think is an oldie; Bonifacio ?
Laminated blade, hardened edge .

Sajen · 22nd December 2009, 09:32 PM

Quote:

Originally Posted by Rick

Why not ?

Here's what I think is an oldie; Bonifacio ?
Laminated blade, hardened edge .

Hi Rick,

very nice bolo, thank's for sharing.

Detlef

Dimasalang · 22nd December 2009, 11:41 PM

Bonifacio bolo.
Agreed, this one seems to be post-WWII. But I would say this is one of the better examples from that time. Most do not look as nice and detailed as this one. Nice grab, I was eyeballin this one too on ebay.

Sajen · 23rd December 2009, 12:08 AM

Quote:

Originally Posted by Dimasalang

Bonifacio bolo.
Agreed, this one seems to be post-WWII. But I would say this is one of the better examples from that time. Most do not look as nice and detailed as this one. Nice grab, I was eyeballin this one too on ebay.

Thank's for your comment!

Regards,

Detlef

migueldiaz · 23rd December 2009, 03:29 AM

Quote:

Originally Posted by Sajen

I just buy this philippine bolo by epray. Since I have read a lot in Filhistory from Migueldiaz (great page) I think I buy a Tagalog bolo, would be nice when you confirm this and can give me an estimated age of this small sword. It is 23 inch OA or 58,4 cm. Until now I don't have it in my hands and this is a picture from the seller. All comments are very appreciated.

Sajen, thanks for the complement. Actually I was eyeing this bolo too, until I realized that I was running out of ga$

It's a nice piece, congrats.

Quote:

Originally Posted by FilAmfighter1

If anybody wants I can post a link for PDF magazine- special edition on Filipino Weapons A-Z so you have it for refference.

FilAmfighter1, thanks for mentioning this. Can you please post the link? Thanks

FilAmfighter1 · 4th January 2010, 09:01 PM

I came back from Holiday vacation.The FMA Digest has recently shutdown its publication of the old magazine. It is be re-organized, I have been asked to write column on the Basics of FMA. Anyway, I have the PDF file I can send to anyone who wants it but the link for the special edition does not work now. I will be taking some pictures of some of my blades, I will post as soon as I can.

FilAmfighter1 · 4th January 2010, 09:13 PM

http://www.fmadigest.com/Issues/spec...e-Weaponry.pdf
Past this link in It will give you route to the PDF, 45 page of info on Filipino Blades and other weapons and were to buy them.

ibeam · 5th January 2010, 07:08 AM

FilAmFighter1,
Are you the author of this article??

FilAmfighter1 · 5th January 2010, 02:46 PM

Yes, I was the primary with material shared by others with me. It was based upon my collection of notes over years. After putting it togather has recieved at-a-boys and stones-throwing. I will say it is not perfect but it was the best I had. Some day I hope to do another with new pictures and more info.

FilAmfighter1 · 11th January 2010, 06:28 PM

Here are some of my blades that I have collected over the years. Ok I know I have one Hawaiian blade in there as well.

22nd December 2009, 08:00 PM	#1
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 9,165	Tagalog Bolo? I just buy this philippine bolo by epray. Since I have read a lot in Filhistory from Migueldiaz (great page) I think I buy a Tagalog bolo, would be nice when you confirm this and can give me an estimated age of this small sword. It is 23 inch OA or 58,4 cm. Until now I don't have it in my hands and this is a picture from the seller. All comments are very appreciated. sajen Attached Images

22nd December 2009, 09:28 PM	#6
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,336	Why not ? Post away . Here's what I think is an oldie; Bonifacio ? Laminated blade, hardened edge . Attached Images

4th January 2010, 09:01 PM	#11
FilAmfighter1 Member Join Date: Dec 2009 Location: Torrance Posts: 49	FMA Digest Special Editions I came back from Holiday vacation.The FMA Digest has recently shutdown its publication of the old magazine. It is be re-organized, I have been asked to write column on the Basics of FMA. Anyway, I have the PDF file I can send to anyone who wants it but the link for the special edition does not work now. I will be taking some pictures of some of my blades, I will post as soon as I can.

4th January 2010, 09:13 PM	#12
FilAmfighter1 Member Join Date: Dec 2009 Location: Torrance Posts: 49	We got lucky and the link still works http://www.fmadigest.com/Issues/spec...e-Weaponry.pdf Past this link in It will give you route to the PDF, 45 page of info on Filipino Blades and other weapons and were to buy them.

5th January 2010, 02:46 PM	#14
FilAmfighter1 Member Join Date: Dec 2009 Location: Torrance Posts: 49	FMA Digest Special Edition Yes, I was the primary with material shared by others with me. It was based upon my collection of notes over years. After putting it togather has recieved at-a-boys and stones-throwing. I will say it is not perfect but it was the best I had. Some day I hope to do another with new pictures and more info.

22nd December 2009, 08:16 PM	#2
Robert EAAF Staff Join Date: Feb 2005 Location: Centerville, Kansas Posts: 2,196	Hello Sajen, IMHO by looking at the blade (it looks to be mono-steel) and the finish of the horse hoof style horn grip, the brass casting of the guard and the embossing on the leather sheath I would have to say that this piece is from WWII or later. I hope this is of some small help. Robert

22nd December 2009, 11:41 PM	#8
Dimasalang Member Join Date: Aug 2008 Posts: 264	Bonifacio bolo. Agreed, this one seems to be post-WWII. But I would say this is one of the better examples from that time. Most do not look as nice and detailed as this one. Nice grab, I was eyeballin this one too on ebay.

5th January 2010, 07:08 AM	#13
ibeam Member Join Date: Dec 2004 Location: New Jersey Posts: 134	FilAmFighter1, Are you the author of this article??

11th January 2010, 06:28 PM	#15
FilAmfighter1 Member Join Date: Dec 2009 Location: Torrance Posts: 49	Here are some of my Filipino Blades Here are some of my blades that I have collected over the years. Ok I know I have one Hawaiian blade in there as well. Attached Images

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode