keris blade for comment.

BSMStar · 27th March 2005, 05:34 PM

Hi Captain,

Nitric acid (HNO3) is commonly used to etch meteorites (it removes iron faster than nickel)... it may work better for you to "open" or "lift" the grain of the pamor. But of course, if it is not available then sulfuric will work a little more slowly. Be careful of the concentration you use (5% nitric in 95% isopropyl alcohol works, slowly add acids to other diluents and not the other way around - it can be a violent reaction) and the exposures time that you allow to the acid, you do not want to be too aggressive. It sounds like you are off to a great start!

Phosphoric acid makes a great rust remover in extreme cases.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

27th March 2005, 05:34 PM	#20
BSMStar Member Join Date: Jan 2005 Location: Kansas City, MO USA Posts: 312	Hi Captain, Nitric acid (HNO3) is commonly used to etch meteorites (it removes iron faster than nickel)... it may work better for you to "open" or "lift" the grain of the pamor. But of course, if it is not available then sulfuric will work a little more slowly. Be careful of the concentration you use (5% nitric in 95% isopropyl alcohol works, slowly add acids to other diluents and not the other way around - it can be a violent reaction) and the exposures time that you allow to the acid, you do not want to be too aggressive. It sounds like you are off to a great start! Phosphoric acid makes a great rust remover in extreme cases.