|
11th April 2018, 04:39 AM
|
#5 |
|
Member
Join Date: Jun 2013
Posts: 1,230
|
I should have clarified that the edge of the bevel of 1/8" on the spine is at the base; after 5" it tapers down to an edge of about 1/64".
On the bottom the max. width is at the 1st notch of about 1/8";3/4" after the 2nd notch, it becomes very sharp. Thanks again for the info. |
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Threaded Mode