Inlay, koftgari, repousse, chasing and neillo

Battara · 15th December 2004, 07:14 AM

Hi folks. First I want to thank you Ian for your kind feedback. Second, I will try to upload the pictures in the right places:

INLAY:

Deep grooves are cut into a harder material (ideally at different angles) and then a softer materal is inserted. For example, on Ian's barong, I had to re-engrave the grooves - cut deeper into the grooves - into the steel. Then I took softer brass wire and hammered it into the grooves. This method of decoration makes the softer metal more permanent and thicker. Often it is then polished down to the level of the harder material. Here is an example of the brass inlay I did on Ian's barong blade:

15th December 2004, 07:14 AM	#5
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,272	Hi folks. First I want to thank you Ian for your kind feedback. Second, I will try to upload the pictures in the right places: INLAY: Deep grooves are cut into a harder material (ideally at different angles) and then a softer materal is inserted. For example, on Ian's barong, I had to re-engrave the grooves - cut deeper into the grooves - into the steel. Then I took softer brass wire and hammered it into the grooves. This method of decoration makes the softer metal more permanent and thicker. Often it is then polished down to the level of the harder material. Here is an example of the brass inlay I did on Ian's barong blade: Attached Images Last edited by Battara; 15th December 2004 at 07:26 AM.