![]() |
![]() |
#1 |
Member
Join Date: Nov 2005
Posts: 341
|
![]()
I have noticed that old keris blades are sharper then modern keris made with modern steel. They also hold an edge far longer then modern steel keris. I have also noticed that they are less prone to rusting then modern blades. An example is I have a very old keris blade which shows no sign of rust but my new keris blade which is perhaps 15 years old has very small spots of rust forming already.
My old keris is very light and razor sharp, I have never sharpened it with no signs of rust but my modern keris is heavy blunt and as I said has signs of rust. I know which one I prefer but why can’t a modern keris worker produce something better then the old keris workers considering the advancements in technology? I have noticed also that modern keris are silver in colour first and then dyed black to bring up the pamor whilst old keris used a dark Iron which contrasted with the pamor. The thing is that if you sharpen a dyed keris the dye will rub off revealing the silver metal underneath and you will need to dye it again. As far as I know old keris had black Iron so even if you sharpen it the keris will still be black at the edge because it was the Iron it was made from which was black not a coating of black dye. I have to say I don’t like these modern dyed blades. Have you also noticed how old keris have a slightly rough grainy (open pore) Iron which soaks up the keris oil when you apply it whilst modern keris have a smooth tight surface, if you apply oil it just sits on the surface and dose not seam to penetrate the blade. I would be very grateful if some of you with knowledge of keris could inform me of the source of this old material from which the blades were made as I feel it is far superior to modern steel keris. Also which empu still use the old traditional methods and materials for making keris blades because if I was going to have a blade made I would not want it made from modern steel using modern methods. |
![]() |
![]() |
|
|