Wobbly guards on Jians and Daos

Atlantia · 10th August 2010, 10:54 PM

A fellow collector brought some pieces around to my place, amongst which was a fairly bog standard late 19th/early 20th Jian, with a really rattly guard.
I only have one Chinese sword at present, a rather large Dao, which also has a really rattly and rather ill fitting guard.

Anyway, I commented that I've only ever had one Dao, and every Jian I've ever had (and TBH none were exactly top of the range) always seemed to have rattly ill fitting guards.

He said thats how they are meant to be, but I cant see it myself.

Gavin Nugent · 11th August 2010, 02:36 AM

Quote:

Originally Posted by Atlantia

A fellow collector brought some pieces around to my place, amongst which was a fairly bog standard late 19th/early 20th Jian, with a really rattly guard.
I only have one Chinese sword at present, a rather large Dao, which also has a really rattly and rather ill fitting guard.

Anyway, I commented that I've only ever had one Dao, and every Jian I've ever had (and TBH none were exactly top of the range) always seemed to have rattly ill fitting guards.

He said thats how they are meant to be, but I cant see it myself.

The guards on these pieces should NOT be rattly at all but most often are, though more so on the Shuang Jian in my experience.

I suspect it is for the most part due to shrinkage of materials such as timber and horn. The 18th century examples I have in my gallery have become slightly loose, it can be plainly seen that over time the collar has worn away parts of the timber and they no longer press hard against the guard as they should to hold it tightly in place. I suspect a little removal of some timber, some compression from the pommel end with a little further peening of the tang would fix it. I have however when the moments right earmarked these to be sent to Philip for proper restoration and loose guards are something he can correct.
The Dadao would suffer from the same issue. New grip slabs hard against the guard and some tight new binding would also remove play in the guard.

My two cents worth is that they are not supposed to be at all, it is just the ravages of time that have made them so.

Gav

Philip · 11th August 2010, 06:52 AM

Gavin is right, shrinkage of the grip material is the number one cause of loose guards. You see this in other kinds of swords, too -- I've lost count of the ivory- and MOP-hilted Euro. smallswords with loose hilts that I've been asked to fix over the years.

In general, the downmarket-quality jian and dao have less precise fitting of guards to blade tangs, as might be expected. Cheaper weapons were often assembled from blades and other parts obtained from different sources and of course there was no standardization. A fine sword would be put together by a master craftsman who made sure the guard was the right size, and filed the aperture to fit snugly.

Various approaches were used to ensure tight guard fit. During the late Qing, some sabers had brass guards peened tightly in place -- corners of the tang were raised with a chisel and a drift-punch was used to drive the little "horns" tight against the rear of the guard. Some early Qing saber fittings featured a tongue-and-groove interlock between the front of the ferrule and the rear face of the guard.

Occasionally I face the opposite problem -- hilts that are so tight all around that they can't be removed from the blade. This is almost exclusively a problem with jian using one-piece hardwood or horn grips. The things fit so tightly to begin with that when the tang starts to rust inside, the iron swells up and the hilt is on there for good.

Philip · 11th August 2010, 06:58 AM

Ever wonder why Japanese hilts have those thin metal washers (seppa) on either side of the tsuba? These plates take up the slack in case a thinner guard is substituted for another. More importantly, they can be used to compensate for shrinkage of the wood handle that would cause a formerly tight hilt to loosen.

With Japanese hilt construction (in which the blade is readily removabe), all this makes sense. With Chinese (and European) hilts that are secured by a peened pommel, it's a different story.

By the way, I don't suggest banging on the end of the tang to tighten a Chinese or Western-style hilt that's loose. Old wood can be dried-out and weak, or may have internal rot or worm damage.

fearn · 11th August 2010, 06:07 PM

I'm certainly not the expert the others are, but I have seen loose guards on modern wushu implements, and they're used essentially as castanets to make a more interesting performance--they rattle when swung. I don't know whether this is done deliberately, or whether the wushu artists are simply making the best of a bad implement (hate to call those things weapons), but there you have it. If it is done deliberately, it would be nice to find out how old the tradition is.

Best,

F

Philip · 12th August 2010, 08:11 AM

Wushu is choreography with practically no real martial content. Its modern incarnation is a creation of the communist government's sports ministry as a sugar-coated mishmosh of traditional martial arts forms to be promoted as exercise and entertainment. Hand-to-hand combat techniques were to be reserved for the military and police. Hence the insubstantial nature of wushu "weapons" whose thin blades make a nice noise as they are swung about.

Wushu does have antecedents in the flashy martial arts displays that were often part of the lowbrow entertainment of the marketplace in imperial China. These acts were sometimes paired with strongmen pulling massive bows or heaving large stone blocks, or boxers who would invite the wannabe pugilists in the audience to join them in a bout. Enterprising medicine pitchmen would often hire these guys as a "testimonial", and secret societies sometimes used the shows to attract young ne'er-do-wells as potential members.

The weapons used for such shtiks were often of exaggerated proportions, and more importantly, designed to make noise. An example is the broad falchion with 9 loose-rings on the dorsal side of the blade. Tridents would often have several large iron washers mounted on the shank between the tines and the socket that would jingle as the devices were brandished. The difference is that such show-weapons of the past were sometimes of considerable size and heft (although their blades of course were mostly unsharpened) whereas today's wushu weapons are almost all extremely light and flimsy.

10th August 2010, 10:54 PM	#1
Atlantia Member Join Date: Jun 2008 Location: The Sharp end Posts: 2,928	Wobbly guards on Jians and Daos A fellow collector brought some pieces around to my place, amongst which was a fairly bog standard late 19th/early 20th Jian, with a really rattly guard. I only have one Chinese sword at present, a rather large Dao, which also has a really rattly and rather ill fitting guard. Anyway, I commented that I've only ever had one Dao, and every Jian I've ever had (and TBH none were exactly top of the range) always seemed to have rattly ill fitting guards. He said thats how they are meant to be, but I cant see it myself.

11th August 2010, 06:52 AM	#3
Philip Member Join Date: Dec 2004 Location: California Posts: 1,036	rattletraps Gavin is right, shrinkage of the grip material is the number one cause of loose guards. You see this in other kinds of swords, too -- I've lost count of the ivory- and MOP-hilted Euro. smallswords with loose hilts that I've been asked to fix over the years. In general, the downmarket-quality jian and dao have less precise fitting of guards to blade tangs, as might be expected. Cheaper weapons were often assembled from blades and other parts obtained from different sources and of course there was no standardization. A fine sword would be put together by a master craftsman who made sure the guard was the right size, and filed the aperture to fit snugly. Various approaches were used to ensure tight guard fit. During the late Qing, some sabers had brass guards peened tightly in place -- corners of the tang were raised with a chisel and a drift-punch was used to drive the little "horns" tight against the rear of the guard. Some early Qing saber fittings featured a tongue-and-groove interlock between the front of the ferrule and the rear face of the guard. Occasionally I face the opposite problem -- hilts that are so tight all around that they can't be removed from the blade. This is almost exclusively a problem with jian using one-piece hardwood or horn grips. The things fit so tightly to begin with that when the tang starts to rust inside, the iron swells up and the hilt is on there for good.

11th August 2010, 06:58 AM	#4
Philip Member Join Date: Dec 2004 Location: California Posts: 1,036	seppa Ever wonder why Japanese hilts have those thin metal washers (seppa) on either side of the tsuba? These plates take up the slack in case a thinner guard is substituted for another. More importantly, they can be used to compensate for shrinkage of the wood handle that would cause a formerly tight hilt to loosen. With Japanese hilt construction (in which the blade is readily removabe), all this makes sense. With Chinese (and European) hilts that are secured by a peened pommel, it's a different story. By the way, I don't suggest banging on the end of the tang to tighten a Chinese or Western-style hilt that's loose. Old wood can be dried-out and weak, or may have internal rot or worm damage.

12th August 2010, 08:11 AM	#6
Philip Member Join Date: Dec 2004 Location: California Posts: 1,036	wushu, past and present Wushu is choreography with practically no real martial content. Its modern incarnation is a creation of the communist government's sports ministry as a sugar-coated mishmosh of traditional martial arts forms to be promoted as exercise and entertainment. Hand-to-hand combat techniques were to be reserved for the military and police. Hence the insubstantial nature of wushu "weapons" whose thin blades make a nice noise as they are swung about. Wushu does have antecedents in the flashy martial arts displays that were often part of the lowbrow entertainment of the marketplace in imperial China. These acts were sometimes paired with strongmen pulling massive bows or heaving large stone blocks, or boxers who would invite the wannabe pugilists in the audience to join them in a bout. Enterprising medicine pitchmen would often hire these guys as a "testimonial", and secret societies sometimes used the shows to attract young ne'er-do-wells as potential members. The weapons used for such shtiks were often of exaggerated proportions, and more importantly, designed to make noise. An example is the broad falchion with 9 loose-rings on the dorsal side of the blade. Tridents would often have several large iron washers mounted on the shank between the tines and the socket that would jingle as the devices were brandished. The difference is that such show-weapons of the past were sometimes of considerable size and heft (although their blades of course were mostly unsharpened) whereas today's wushu weapons are almost all extremely light and flimsy.

11th August 2010, 06:07 PM	#5
fearn Member Join Date: Dec 2004 Posts: 1,247	I'm certainly not the expert the others are, but I have seen loose guards on modern wushu implements, and they're used essentially as castanets to make a more interesting performance--they rattle when swung. I don't know whether this is done deliberately, or whether the wushu artists are simply making the best of a bad implement (hate to call those things weapons), but there you have it. If it is done deliberately, it would be nice to find out how old the tradition is. Best, F