![]() |
|
![]() |
#1 |
Member
Join Date: Mar 2010
Location: York, UK
Posts: 167
|
![]()
Howdy lads and lasses! Been a little quiet here of late, not too much to keep me occupied on the ethnographic weapons front; my jezail's barrel's in the works, and another of the monsters on the way, but that apart, no developments. Except...
Having taken a look at Spunjer's thread on the Silver Surfer (I do like the name, by the by ![]() It seems a tragedy to let the world see one more rust-encrusted gun barrel, when a quick strip-down, taking no more than ten minutes, will reveal that that barrel was once, and might yet be again, a thing of exquisite beauty. Don't we have enough aged, unrestored muskets kicking around? Or am I just getting consumed with my (entirely transparent) desire to see the whole barrel regain the appearance that only its protected parts now hold, and have before me a genuine example of the wonders of Indo-Persian craftsmanship, whose qualities I can at last show to our beloved punters? Morally, I can't help feeling that the best thing to do would be to work towards the eventual goal of restoring the barrel as best I can. But practically - even if the argument is sound, in other words - we still have the problem of doing it right; this is point one, of course. How does one go about this? What are the risks? This particular barrel is, as those of you who saw my first thread here will have seen, badly rusted. Mottled with it, in fact. So the question becomes, how do I remove the rust and then, moreover, how do I etch the barrel? Is there a high risk of damaging the pattern in that process?* The practical question that vexes me the most is that of avoiding damaging the remaining pattern on the barrel's surfaces; if, in the course of rust removal (chemical, preferably, to avoid mechanically damaging the pattern), I remove the patterning I'm trying to bring out, it's a bit of an own-goal. So, yes. Arguments and help, go! * Do beavers mate for life? Is there any means of knowing if there is a god? Has anyone seen that tin opener I lost some while ago? Etc... |
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Feb 2006
Posts: 637
|
![]()
any lose or huge surface rust take off. you can do somehing as simple as take sand in your hand and run it across the barrell a few times. take a towel with some ammonia across it and then etch it. are you going to have some pitting it yes you will. it still will look better than what you have and you will not lose pattern at this point. you start having concernes about losing pattern when you take off layers
|
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Apr 2005
Posts: 3,249
|
![]()
In quite a few cases, the insistance to change nothing seems hardly more than an excuse to me, even in a museum setting. Under perfect storage conditions even red rust may be stable and not active. However, history has proven again and again that conditions are unlikely to stay perfect for centuries. Moreover, these conditions are more than likely to damage any wood or horn which may be attached to such a piece of iron - so, you'll have to decide on a compromise anyway.
Under usual collector's conditions (and many museums are not better equipped or cared for if at all), I regard active rust as an serious infection which needs to be treated (like any museum worth its name would kill off any bugs by fumigation/gas/heat treatment). I agree with Ward that to preserve the topographic patterning one should avoid anything that may cause abrasion of the steel like sandpaper and, especially, power tools! I'd also be hesitant with even fine sand since it can scratch the steel. Why not only use very fine steel wool, oil and lots of elbow grease to stay on the safe side of things? Top it off with a quick etch and I'm sure you won't regret the restoration! Regards, Kai |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Mar 2010
Location: York, UK
Posts: 167
|
![]()
Thank you both for your input. I should have been more specific, however; this is old, very inactive rust (brown-black, in fact) which is pretty hard to get rid of. The active stuff I've already dealt with; it's this hideously ugly, but nonetheless fairly innocuous, black patchwork that I'd like to combat if I can. The problem is, of course, that it's very firmly bonded to the steel. Mechanical means seem difficult to pursue as a result, and chemical treatments have the potential to go very badly awry, hence my concern over whether to proceed. I can try applying de-corroding chemical treatment, for instance, but I do worry about it destroying the pattern. Alternatively, I can try using a brass pick and oil and a lot of patience, which should leave a surface that can be etched - in about six months.
![]() |
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Mar 2010
Location: York, UK
Posts: 167
|
![]()
A quick update. I've just come away from a small experimental session with a fine steel pick, lubricated with a coating of common 3-in-one oil. The result? The rust is, it turns out, much softer than the steel (not surprisingly), meaning it can be picked out - it will take an awfully long time to do the entire barrel, but it can be done. The picture illustrates the difference; the circled area has clearly enjoyed a sort of topographical reversal, with the rust (formerly proud of the barrel's surface) now diminished sufficiently to be at least level with the walls of the pits it has made in the metal.
The second thing that I've determined is that this will take, almost literally, forever. But, if I'm careful, I should be able to avoid damaging sound metal. I think this might be the (extremely slow, painfully laborious) way forward, coupled perhaps with gentle use of 0000 steel wool and yet more lubrication. (Yes, I take the blame for rising fuel prices.) |
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Feb 2006
Posts: 637
|
![]()
the part you are missing is that etching is a acid and will eat rust just as well as iron. do not soak the piece in any oil yet. It will just screw up the etch. The only reason you completly sand a barrell down is so when you do the etch you get a complete mirror finish on it. the longest I have ever etched a piece was 17 days for a slow etch. A quick etch can be done in a few minutes
|
![]() |
![]() |
![]() |
#7 |
Member
Join Date: Mar 2010
Location: York, UK
Posts: 167
|
![]()
Ward, I appreciate that acid should chomp through rust just as it will cause the appearance of the watered pattern by removing some of the softer iron. What I still worry about is whether the effect will be what I desire. To give you an idea of why, I discussed in an earlier thread the effect of Renaissance Metal De-Corroder on the watered steel of this barrel and various other objects. The results were varied. Rust went, but so did lustre, and I find myself unsure of whether repeating the process - bearing in mind that this stuff is, as far as I can tell, an aqueaous solution of hydro-oxycarboxylic acid - is a good idea.
Some pics, herewith, of the areas of this barrel I treated with this acidic solution. The pattern remains visible, one way or another, but in the tang area (which was subjected to the longest treatment) the shine has vanished from the steel. A consequence which, along with the low visibility of the pattern, I wish to avoid. |
![]() |
![]() |
![]() |
#8 |
Member
Join Date: Mar 2010
Location: York, UK
Posts: 167
|
![]()
As an aside, I apologise for being so over-cautious, and for asking questions over and over again. The thing is that I feel very much responsible for this gun, not only in a personal, but in a professional sense. I don't think I'd ever really forgive my own ill-judgement were I to ruin, by carelessness or omission of action, a wonderful artefact that has stood the test of, in all likelihood, centuries. So thanks for being so forbearing. If I can get my concerns cleared up, I think this barrel will look truly beautiful once restored fully.
|
![]() |
![]() |
![]() |
#9 |
Member
Join Date: Feb 2006
Posts: 637
|
![]()
ok use the bottom of the barrell it will never be exposed after reasembly. just mask off around it. you can test your various acid test on it. then no harm no foul
|
![]() |
![]() |
![]() |
#10 |
Member
Join Date: Mar 2010
Location: York, UK
Posts: 167
|
![]()
Right. Ordinary Duct tape will do for masking off the un-etched sections of the barrel, I take it? And as for etches, what would you recommend? I know that a quick etch with vinegar helped to bring the pattern out slightly. But presumably something a little stronger is desired for a full etch of the metal.
|
![]() |
![]() |
![]() |
#11 |
Member
Join Date: Jul 2010
Location: St. Louis, MO area.
Posts: 1,623
|
![]()
Hello. Interesting Thread. A process recently introduced to me by a black powder gunsmith is Glass Bead Blasting (NOT sandblasting). This process has the ability to remove rust without removing the original patina of the metal. I've experienced this first hand. If you go to the Web-Site (link removed by moderator) and look under Services you will see an original Spanish Miquelet lock I own. The before and after photos are amazing, as you'll see. I don't know the effect it would have on Damascus, but it might be worth asking Earl Kathan. He is very knowledgeable in this area. Might save you a lot of time and experamintation? Rick.
Last edited by Lee; 25th April 2011 at 11:25 AM. Reason: Must wade through commercial site to see pictures |
![]() |
![]() |
![]() |
#12 |
Vikingsword Staff
Join Date: Nov 2004
Posts: 6,283
|
![]()
Bead blasting could be a viable alternative .
![]() This service is widely available . There are all kinds of blasting media that would not damage steel; retaining patina might be a problem . |
![]() |
![]() |
![]() |
#13 |
Member
Join Date: Mar 2010
Location: York, UK
Posts: 167
|
![]()
I'm a bit wary of any blasting process, in no small part because I have in my possession a bayonet (French Chassepot model, I think) which, unfortunately, was glass blasted in order to remove rust. Patina's gone, but more critically, so have some small details on the blade itself (stamped and engraved numbers and letters) which would have helped ID it. With that in mind, I'm not sure about using it on this barrel. I think first thing to do is try my hand at a gentle experimental etch with a mild acid, on an area which remains out of sight but which has remaining pattern and corrosion. That'll enable some assessment of the results. Any thoughts?
|
![]() |
![]() |
![]() |
#14 |
Vikingsword Staff
Join Date: Nov 2004
Posts: 6,283
|
![]()
Yeah, I was thinking Walnut shells .
|
![]() |
![]() |
![]() |
#15 |
Member
Join Date: Feb 2006
Posts: 637
|
![]()
Ferricc chloride is a standard ferric sulphate, muratic,photoghraphic fixer,etc. If it were me I would try a small amount every inch or so it will be easy to compare the results. I use bee's wax to mask off items. make sure you apply your acides or salts with a cheap paint brush. Also make sure you nutralize it after. some just use soap and water afterwards. you can also use baking soda if paranoid. I would not glass bead anything unless you want to lose crisp edges and detail work.
ward |
![]() |
![]() |
![]() |
#16 | |
Member
Join Date: Jul 2006
Location: Buraimi Oman, on the border with the UAE
Posts: 4,408
|
![]() Quote:
![]() Much liked this article by the way ! |
|
![]() |
![]() |
![]() |
#17 | |
EAAF Staff
Join Date: Nov 2004
Location: Upstate New York, USA
Posts: 909
|
![]()
Received from Ken:
Quote:
|
|
![]() |
![]() |
![]() |
#18 | |
Member
Join Date: Jul 2006
Location: Buraimi Oman, on the border with the UAE
Posts: 4,408
|
![]() Quote:
Moderator Staff, I believe there are scores of different techniques out there. Would it be possible to open a forum A TO Z to which members could add their cleaning ideas as the forum roles forward which could then be an easily accessible resource ~ and ongoing. Ibrahim Al Balooshi. |
|
![]() |
![]() |
![]() |
#19 |
Member
Join Date: Aug 2010
Posts: 180
|
![]()
Hello all,
RDGAC did you find a rust removal and etching process that produced the results you were happy with and would use again? Did you try the Ferric Chloride? thanks |
![]() |
![]() |
![]() |
#20 | |
Member
Join Date: Jun 2012
Location: USA
Posts: 1,497
|
![]()
Here is a rust removal process used by Ian Bottomley (Curator Emeritus of Oriental Collections at the Royal Armouries Museum based in Leeds). This was originally posted on the Samurai Armour Forum, Ian has had a lot of experience stabilizing and restoring Japanese armor, his process my be helpful to some forum members.
Quote:
|
|
![]() |
![]() |
![]() |
|
|