|
20th March 2005, 02:46 PM | #1 |
Member
Join Date: Dec 2004
Location: What is still UK
Posts: 5,806
|
kurd/IndoPersian ?
Just aquired this morning,things like this are most often over my budget but this being plain might limit its appeal.Some of you are keen collectors of this area,can you tell me more about it.I had suspitions about the leather,after checking with an eye glass it seems okay.OA length 265mm, blade135mm,armour piercing part 9mm thick.Many thanks for any help Tim.
|
20th March 2005, 03:09 PM | #2 |
Member
Join Date: Dec 2004
Location: Houston, TX, USA
Posts: 1,254
|
Interesting. Looks like a decent old blade. The lack of a sharply defined central line to the base of the blade may have struck some as a modern feature, but I'm not sure they'd be correct. In conjunction with the continual curve, rather than the more common 2 stage curve, I wonder if this is the tip from a larger blade.
|
20th March 2005, 04:25 PM | #3 |
Member
Join Date: Dec 2004
Location: Europe
Posts: 2,718
|
Yes Tom, I got the same feeling, especially when looking at the second picture from the top. I also had another feeling - or wild guess if you will - that the blade could be from a katar.
|
20th March 2005, 05:05 PM | #4 |
Member
Join Date: Dec 2004
Location: Houston, TX, USA
Posts: 1,254
|
It's got somewhat of that look; it's the curve that throws me, of course. The curved katars I've seen were the rivetted blade kind, and thus likely made from the remains of obsolete swords their own selves? Whereas the ones with the groove/panel base and the thickened point are usually of the integral/welded blade type? I'm probably speculating based on too few examples here; I definitely see what you mean about resembling a katar blade......if nothing else this may suggest regional origin.
|
20th March 2005, 05:07 PM | #5 |
Member
Join Date: Dec 2004
Location: What is still UK
Posts: 5,806
|
I was sarting to think that,so I have looked again with my jewellers loop and the blade is forged from a reserve of metal rectangular in section with no sign of grinding.After the perusal of a few publications there is the distinct possiblity that it is Afghan/Indian where the metal pieces either side and riveted through the blade is a common form of construction and may help explain the deviation from a more classic or conventional form and also why I could afford it.Tim
|
20th March 2005, 05:24 PM | #6 |
Member
Join Date: Dec 2004
Location: What is still UK
Posts: 5,806
|
Thanks fellows you were both so very close.I am impressed.Tim
|
20th March 2005, 06:21 PM | #7 |
Member
Join Date: Dec 2004
Location: Europe
Posts: 2,718
|
I still think that something is wrong with the proportions. I you, in your imagination, makes the blade as long as the tang is, or maybe a bit longer, then I think the proportions will fit.
|
20th March 2005, 06:36 PM | #8 |
Member
Join Date: Dec 2004
Location: What is still UK
Posts: 5,806
|
It may well have a reasonable length tang but I can not see that without taking it apart.All I can say is , it is most certainly up to the job and feels very comfortable in the hand.Tim
|
22nd March 2005, 07:43 PM | #9 |
Member
Join Date: Dec 2004
Location: What is still UK
Posts: 5,806
|
I hope I am not labouring a point,but I like illustrate what I am discussing.These photos are not very good but the best I can manage.They show the filling of a cavity, giving evidence to a tang of some length and that the blade is not just attached to a piece of wood.Tim
|
12th September 2005, 08:54 PM | #10 |
Member
Join Date: Dec 2004
Location: What is still UK
Posts: 5,806
|
I have finally got a copy of Elgoods book Hindu Arms And Ritual if a triffle late, how very splendid it is. One thing it has brought to mind is what a good book Tirri published is, althought a little light on discussion, it does work as a general reference and gives most collectors the opportunity to say " I have one much better than that! " While on the subject of Elgood, now tell me the proportions and construction is " not right" Tim
Last edited by Tim Simmons; 12th September 2005 at 09:07 PM. |
12th September 2005, 09:47 PM | #11 |
Member
Join Date: Dec 2004
Location: Europe
Posts: 2,718
|
Hi Tim,
Yes you are right ‘Hindu Arms and Ritual’ is a fantastic book; remember to read the notes as well. The two daggers you compare with are different, and with different length of blades, as you dagger is quite another type you can’t compare them. Maybe your dagger was made like it is now, and maybe the blade was a bit longer from the start, we will never know – but it is a nice dagger all the same. |
14th September 2005, 10:10 PM | #12 |
Member
Join Date: Jan 2005
Posts: 485
|
i do agree with jens' theory. the two daggers in elgoods book are of a specific type and both recurve. the blade in tims dagger is different. the two deccani daggers are similar in shape, and have a very slight armour piercing tip (hardly at all), and not thickened to the extent of tims. also, the hilt is not southern in form. this was typical of rthis style, and not inherant in just these two examples.
i think it is a re-used blade, and could possible be the shortened katar that jens mentioned. its a little odd that the fullers just start, although this could be misleading. |
14th September 2005, 10:24 PM | #13 |
Member
Join Date: Dec 2004
Location: What is still UK
Posts: 5,806
|
I am aware that the pictures are of different daggers. I was trying to illustrate that knives and knife dimensions do not follow a strict rule book and would vary according to the competance of the many manufacturers and wealth of thier customers. Even in Elgoods book which is only highlighting some of the best production the variation of similar fullered knives is a good many. With these weapons to assume one type is the law is a little simplistic. We are not talking bayonets for a 303. Tim
|
17th September 2005, 05:38 PM | #14 |
Member
Join Date: Dec 2004
Location: What is still UK
Posts: 5,806
|
A very good idea I shall call the vets in the week. I hope they will oblige, I do take three dogs there from time to time. Fingers crossed. Tim
|
28th September 2005, 05:53 PM | #15 |
Member
Join Date: Dec 2004
Location: What is still UK
Posts: 5,806
|
vets
I made enquiries at the vet as to an x-ray. The cost was £36+tax which is high relitive to the value of the knife when you are not rolling in it . The staff were also a little unsure as the head honcho was out. If things pick up, whatch this space. Tim
Last edited by Tim Simmons; 28th September 2005 at 06:31 PM. |
28th September 2005, 07:45 PM | #16 |
Member
Join Date: Dec 2004
Location: Europe
Posts: 2,718
|
May be you are right Tim, but I think you should value it more to the knowledge, than to what you paied for the dagger.
|
29th September 2005, 06:26 PM | #17 |
Member
Join Date: Dec 2004
Location: What is still UK
Posts: 5,806
|
Yes Jens, it is not over yet . Tim
|
19th December 2005, 08:48 PM | #18 |
Member
Join Date: Dec 2004
Location: What is still UK
Posts: 5,806
|
This has recently finished on ebay. It is just a little similar in style. Tim
|
19th December 2005, 09:43 PM | #19 |
Member
Join Date: Dec 2004
Location: Europe
Posts: 2,718
|
Hi Tim,
Did you get the X-rays of your dagger? Jens |
19th December 2005, 09:59 PM | #20 |
(deceased)
Join Date: Dec 2004
Location: East Coast USA
Posts: 3,191
|
Tim
I think its a neat little dagger and if you just can't stand looking at it any more well enough of that You should try doing a light etch on the blade my guess is that it's wootz Lew |
20th June 2010, 09:30 PM | #21 |
Member
Join Date: Dec 2004
Location: What is still UK
Posts: 5,806
|
I have just found this to add. I got rid of the item that I started the thread with, just feel I took, not the best opinion?
http://www.jfsantiquearms.com/edged_weapons/6.html Last edited by Tim Simmons; 21st June 2010 at 09:18 PM. |
|
|