Ethnographic folding knives

[ausjulius]

well, here we are always talking about swords and spears and such..
but now what about some folding knives then

the first foto next to the okapi knife it is a factory made version of a type of dagestani folding knife. with a wood handle.

the next two are hand made, with forged convex ground blades and plexi glass handles with colored tinfoil underneath,,

this is the more common dargins made folder, made in the village of khabouk, comes with a pistol grip sort of shape grip, there is also several other styles of handle shape used, some more like the french and italian gunstock shaped pocketknife handles..

here is a Lak made folding knife with a locking blade from dagesan it is with a pink plexiglass handle,, actualy the foilunder is pink ,, made by a mamber of the lak ethnic group..





i beleive the khabouksky style of folding knife well predates communisim and proably originates some time in the earily 19th centuary when factory made goods began to arrive from russia and europe and folding knives would have been introduced..

ive not seen any very old exsamples.. as i suspect these were just worked till they fell apart,,.. older ones normaly have buffalo horn handles,, , but the style hasn't changed much,

the first knife with the pink scales is about 30 or 35 years old and the other with green scales it is only 2 or 3 years old..


so here is a dagestani folding knife........

what other ethnographic folding knives from around the world have peoples here..

[KuKulzA28]

the 'pachihlan' folding knife from Shihling in Taipei, Taiwan is pretty unique...

[ausjulius]

ah interesting, yes ive seen these knives before , some are rather well made also,

is there anyone still making them now?

i wounder if they are a european influnce ,, and if they ar eonly on taiwan,, as after all the portagese and dutch were the original colonists there with the chinese comming while the islands were under european control, maybe this pocket knife was derived from a european folding knife, ive seen quite alot of chinese friction folders from mainland china but none with a back spring on the blade.
\

[A. G. Maisey]

I like folders.

I've got a lot of folders. I do not collect them, I accumulate them.

Indiscriminately.

I buy $1 ones with broken handles and blades and fix them and sharpen them, and use them as bench knives.

In fact, any folder that I see that isn't too expensive , I buy.

This one is one of my more unusual ones. Its probably about as ethno as an ethno folder could be. I would have posted pics of it before now, but I had lent it to a friend. I don't know what it is, or where its from, but my guess is that it is a carpet maker's knife.

[Ferguson]

My only ethnographic folder. A rather touristy folding Lohar from Afghanistan.

Steve

[David]

I dunno Steve...it may be a bit "touristy", but it's cool!
I wonder though about including some of these factory manufactured folders in here as ethnographic. I guess i don't expect ethnographic blades to all be carbon copies of each other as these factory ones are. They may have an ethic style, but is that enough to tag them ethnographic?

[KuKulzA28]

Originally Posted by ausjulius

i wounder if they are a european influnce ,, and if they ar eonly on taiwan,, as after all the portagese and dutch were the original colonists there with the chinese comming while the islands were under european control, maybe this pocket knife was derived from a european folding knife, ive seen quite alot of chinese friction folders from mainland china but none with a back spring on the blade.
\

I know the blade design itself is southern Chinese/Taiwanese (hoklo and cantonese folks), however the folding style and mechanism may not be "traditional" though it's probably old enough a style to be considered such. I don't know if the Dutch, Spanish, French, or Portuguese have had that much of an influence on Taiwanese knife-making. Perhaps they did. I DO know that Taiwan hasn't been locked away from influences though, as the northern tribes fold their tangs similarly to Chinese and southern tribes have things in common with northern Filipinos and the Burmese Kachins, Naga, and Assam people. Japanese definitely influenced the metallurgy in some areas. But if any Sino/Taiwanese group was to be influenced by the Europeans it would probably be the Cantonese and the Hoklo, those who had the most contact with the Westerners...

an example of that can be seen with Lorchas... ships that combined the European sea-going hull with the Chinese sails... best of both worlds so to speak... so an age-old Chinese blade design and a European folding mechanism? not impossible... but I plan to get some of those folders within a few months so maybe I can comment on this better later on


EDIT: yes there is one maker left as far as I know... he's in the Shihling part of Taipei, Taiwan

[A. G. Maisey]

Here's another Chinese folder.

I use this as a garden knife.

It is unusual in that the liners are of a single piece of steel that has been bent over the spring.

[asomotif]

but my guess is that it is a carpet maker's knife.

Dear Alan,

I have had one of these too and was told it was from eastern India.
The seller traveled to India and eastern asia regularly to buy his stock.
They told me that it had something to do with cleaning coconuts, but it I can imagine that the construction is a bit to fragile for that job.
Any guess is worth as much as mine.

[gorda]

Originally Posted by ausjulius

the first foto next to the okapi knife it is a factory made version of a type of dagestani folding knife. with a wood handle.

It’s very new and interesting to me, if "okapi knife it is a factory made version of a type of dagestani folding knife." any more examples?

[kronckew]

here's a recent hand made bulgarian friction folder.


and some ring-locks



the kudu is a cold steel copy of the okapi, with fancier hardware & a modern glass reinforced zytel handle.

the okapi, made in so. africa, was originally made in solingen, but they licensed it to SA, the other large one with the more abrupt clipped point has an outline eagle head in a circle in a square stamped on the blade. i think it's an earlier german one. the teeny one (2in. blade) with the horn handle is an older spanish variant.

they are a variation on the ratcheting navaja design from spain, here is a six and a three inch blade version, the lever near the pivot lifts the lock pawl, similar to the ring pull type. there are five ratchet teeth the pawl clicks over on opening, preventing it from being pushed back and closing on the owners hand in case of a fight. the lever normally lies flat against the back of the grip, is raised 90 degrees to unlock the blade for folding. i've partially lifted them here for clarity.


they say the sound of the lock pawl clicking over the ratchet teeth was the scariest sound , and for some the last sound they ever heard, in a spanish bar...

the okapi is known to have killed more men in so. africa than any other knife.

[kronckew]

another ethnic folder i like is the barrel knife from sweden, they are each unique and the parts are not interchangeable.
this is sometimes referred to as an '1874' model as that was when it was 'patented' in the USA by a maker who had learned to make them in sweden, one of the swedish makers, john engstrum stamped his with the date he started making them, also 1874, this is NOT necessarily the mfg. date, he made them from 1874 thru 1918 and all were stamped 1874. they were made from 1864-1925 by the major mfg. mine is a p. holmberg, made between 1900-1920, 2.75 in. barrel.

photos showing how it's opened (reverse sequence to close )


closed


unlocked and removed from grip - there is a little spring loaded pawl/lever near the ring


blade swinging into position. you can see the little spring locking thingy


reinsterted and locked into grip and you have a nice scandi fixed blade knife.

[KuKulzA28]

For those interested, I found the website of the traditional knife-maker in 士林, Taipei, Taiwan. I believe he is 5th generation in the practice, making these traditional bamboo-leaf shaped blades. He has no apprentices as far as I know. There's a price list and sampling of the hand-made / custom-made 士林刀! Here's also a short youtube video of him. I've ordered a blade with him, and it should be done in November (he has me in the queue).



I am not sure if I am allowed to post his website as it is a commercial site (though not an "ongoing auction"). I think he also has a partnership that is a multi-person assembly process that makes decent but not quite as good knives.

[Oriental-Arms]

Regarding the small folder posted by Maisey, thus was discussed before in the forum. See http://www.vikingsword.com/vb/showthread.php?t=918

[ausjulius]

Originally Posted by gorda

It’s very new and interesting to me, if "okapi knife it is a factory made version of a type of dagestani folding knife." any more examples?

>>?????
NEXT TO THE OKAPI KNIFE...... is a factory made version of a dagestani folding knife,,
the knife below the okapi knife........ okapi is a french style knife made by a german firm for trade in africa now made in south africa... not a ethnograpic knife but surly resembling some from france and southern europe in many ways..

[Dom]

Hi
I'm a mountaineer, and we are belong an ethnie, the "Rouergat"
our tradition is to have a folding knife multi-purpose,
since 1829 there is a famous blacksmith, Calmels,
who is manufacturing the "Laguiole knifes",
he still yet manufacturing, and trading his knifes
"ONLY" in his shop of Laguiole city (12210 - Aveyron - France)

unfortunatly, in our days, those knifes are to much fashionable,
and there are too many copies from everywhere ... even China ...
under the name of "Laguiole"

here on display, only "Calmels Laguiole"

à +

Dom

[A. G. Maisey]

Yeah, there are a lot of copies of these knives. The ones I've shown are by Maki, David, and one unbranded one that except for the fact that it was purchased by a close friend from a small maker in South France, when she was living there, you could easily take as Pakistan or Chinese production.

If there is an Aussie ethnic folder its the three blade stock knife.

[Freddy]

Not everything is so well organized, Alan. Most of the pocket knives are stored in boxes (for the tin boxes, I have to eat a lot of cookies ).
I keep the smallest ones in plactic bags. I also tag them, so I know when and where I bought them and what I paid.

I'll show you two nice ones. First is dated 1923. I think it's the oldest pocket knife I have. The other one could be considered an etnographic pocket knife. It's a handmade knife from Turkey. The blade has the maker's name stamped on it : BILAL CAN. It has a simple blade and a horn handle.

[A. G. Maisey]

Yes Freddy, as I said:- organised.

The knives I'm showing here are the ones I have readily accessible in a drawer. I've got others all over the house and workshop. The ones in the drawer are only storedas you see. No grouping, no plastic bags, I get a new knife I just put it in the drawer.

Here are few that may perhaps be interesting.

A--- dates from 1878, a star/cross

B--- my mother's knife from 1939

C--- my grandfather's knife from pre-1914

D--- a group that I believe pre-dates 1920

E--- a couple of early multi-purpose knives

F--- a couple of hobo sets, the nickel one from the WWI period, the horn handle one I believe from pre-WWII

G--- a group that I believe pre-dates WWII

[Prasanna Weerakkody]

A collection of folding Knives 17th -18th Century from the Kandy Museum Sri Lanka.

[fernando]

Very nice examples, Prasanna

[Gonzoadler]

An old spanish Navaja:

[Gonzoadler]

And inspired by it, a modern knife made by Carl Julius Herbertz: