![]() |
|
![]() |
#1 |
Member
Join Date: Oct 2007
Posts: 1,592
|
![]()
Hi,
Continental European, rather than English I would suspect, mid 18thC hunting sword. O.A. length 28 inches blade 22 3/4 inches, 1 1/4 at widest and shy of 1/4 inch at its thickest, the hilt is of horn. There is no blade decoration but there is a makers? mark on both sides of the blade, see photos. I have come across one other sword on the net similar looking, but with pictorial relief on the guard, with the same makers? mark. Would obviously like to hear from anybody who has any idea on the maker and of course all comments welcome. Regards, Norman. Last edited by Norman McCormick; 4th June 2014 at 05:21 PM. |
![]() |
![]() |
![]() |
#2 |
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]()
Hi Norman,
From the altar of my ignorance ... ![]() If it is not German, surely has such influence, with that typical shell guard appendix. I can not avoid thinking that many hunting swords are mounted with (shortened) sword blades. Have you examined how the fuller end meets with the point, to exclude such probability ? Nice piece, by the way ![]() |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Oct 2007
Posts: 1,592
|
![]()
Hi Fernando,
German would seem to me to be a good call. ![]() My Regards, Norman. |
![]() |
![]() |
![]() |
#4 |
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]()
I see !
Pity i can't ID the mark; maybe some member will. |
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Oct 2007
Posts: 1,592
|
![]()
Hi
Here's a better image of the 'makers' mark on my sword. Regards, Norman. |
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Oct 2007
Posts: 1,592
|
![]()
Hi,
A friend found this similar mark on a basket hilted backsword. Regards, Norman. Photos, Culloden House Antiques. |
![]() |
![]() |
![]() |
#7 |
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]()
A fleur de liz ... right ?
. Last edited by fernando; 5th June 2014 at 08:53 PM. |
![]() |
![]() |
![]() |
#8 |
Member
Join Date: Oct 2007
Posts: 1,592
|
![]()
Hi Jim,
Once again many thanks for your research efforts re this sword, it certainly makes for very interesting reading. Hi Dmitry, Thanks, I know you have had numerous swords of this type through your hands and I appreciate your input. I was hoping someone was going to touch upon the possible military field use of these swords and as mine has nicks in the blade somewhat consistent with blade to blade contact there was always that possibility but as I have no proof or provenance it will remain conjecture only. My Regards to you Both, Norman. P.S. This site is interesting re the military use of these types of swords. www.jaegerkorps.org/blankwaffen.html Although a re-enactor site these people appear to be very well versed in the history and equipment of the Jaeger Regiments employed by the British in North America. Last edited by Norman McCormick; 7th June 2014 at 05:59 PM. |
![]() |
![]() |
![]() |
#9 |
Member
Join Date: Oct 2007
Posts: 1,592
|
![]()
Double post.
|
![]() |
![]() |
![]() |
#10 |
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]()
Another British sword maker also used the fleur de lys punction in 1730:
http://collections.vam.ac.uk/item/O6...reason-joseph/ |
![]() |
![]() |
![]() |
#11 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,896
|
![]()
Thank you so much Norman for your kind words, indeed the time spent going through all these references made for fascinating reading and I wanted to share as much as I could here for context mostly.
What Dmitry notes is most interesting and I would be even more intrigued to know what references support this fleur de lys makers mark (Fernando thank you for that V&A entry which shows Joseph Reason c.1730). While there were many of these blades of course on English hangers and hunting swords I am curious on the examples found on French and it seems at least one or more Continental swords (need to check further)/ The examples found in the American colonies would be self explanatory, but other than obvious provenance error or broad assumption, it seems odd to see British made blades in Continental swords . |
![]() |
![]() |
![]() |
#12 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,896
|
![]()
I decided to continue my research with what resources I have at hand here as this topic is pretty fascinating. My greatest regret as we left on this trip is that I don't have at hand Southwick; Annis & May and some of the other pertinent books, so I will continue as best as possible.
The assertion that these blades must be English seems based on some entries, such as the V&A example showing the FDL (=fluer de lys) as used by Joseph Reason c.1730 and the number of British swords bearing blades with this mark through the 18th century 1720s into 70s. The specific note that this mark was used by the London Cutlers Co. I also questioned. Did the London Cutlers Co. make blades? or were most, if not even nearly all, imported from Germany? Did any particular English smith or cutler use this FDL as his mark? Was the mark indeed for London Cutlers Co.? In Stuart Mowbrays new (and fantastic!) new book ("British Military Swords 1600-1660) there is good discussion on the Cutlers Company, and while of course the periods covered predate the swords we are focused on here, the context of this organization and English swords and blades is well placed . On p.27, he notes, citing a reference in the early 1700s, "...the sword cutler frequently deals in knives and cutlery but consider him here as concerned in mounting swords, making scabbards etc. The blades come mostly from abroad, and none of them are made by the sword cutler". In another reference (p34) it is noted (cited from "History of the Cutlers Co., C.Welch) that "...it wasn't practical for London cutlers to make their own blades" It seems that "...imported blades were not seen as a bad thing. Most British military men seem to have been of the opinion that Dutch/German blades were superior to British blades" (p.31, Mowbray) . I believe this was cited from "The Mark of the Sword: A Narrative History of the Cutlers Co. 1189-1975" Tom Girtin. In "Boarders Away" (Gilkerson, 1991, p.89) it is noted that "...many of the blades sold by England to America were deemed too inferior for local consumption and so were foisted off on the colonists. German blades crossed the ocean as well, usually via England". It would seem that these comments would support the idea that at least some blades were indeed made by makers in England, but seemed that they were far from being comparable to German blades. The German blades which went to America would be my guess to have belonged to British forces rather than for sale to colonists, as noted for English blades. We know that German swordsmiths had come to England in the early 17th century to Hounslow, and that they had been joined by English smiths as well as the enterprise grew. By 1673, the King had declared that ' sword blades ought to be made in England' (Aylward, 1945, p.31). The end of the Hounslow enterprise seems to have dissipated just after the Civil War but another similar enterprise based on German swordsmiths ( some believed from Hounslow) was formed at Shotley Bridge. The numbers of actual German smiths and English became rather clouded as many Germans had Anglicized their names, but it seems that even after the demise of this enterprise as well (c.1703) there were indeed English smiths making blades. On p.35 (Aylward, 1945, op.cit) in a comment attributed to Charles Ffoulkes (1932), ..the effort to acclimatize the swordsmiths art in England was unsuccessful, and it is not even likely that the prime object of the promoters goal was attained viz. the training of English apprentices in German methods". On p.33 Aylward had also noted, regarding at least with the later Shotley Bridge venture, it appeared that they were importing forgings from Solingen which were ground, tempered and finished at Shotley. While the mill had closed in 1703, it was apparently reopened by Hermann Mohll and later sold to Robrt Oley in 1724. By the 1767, according to Aylward (p.35) ".there were only three bladesmiths in Birmingham , then the seat of the English sword blade trade" In 1783, the Government sought to import sword blades without payment of duties due to the 'disrepute' of English blades. This would suggest there must have been far more than listed in the Birmingham records, and it is stated that by 1814 it was well populated with smiths, so those numbers must have rapidly increased. This effort toward removal of duties as well as large orders of blades by EIC (competing German vs. English smiths) led to the 'sword scandals' spearheaded by Thomas Gill,Birmingham. In Gyngell ("Armourers Marks, 1959) there are many gunsmiths marks shown which are comprised with a sort of half FDL or vestigial bottom half and consistently over the smiths initials. These devices are not at all similar to the European versions as seen on these blades. A gunsmith named Ralph Barras (1721), uses a rather gangly looking FDL with only a single stem below the trefoil. There are no swordsmiths or cutlers shown with the FDL. I would suggest that these blades were likely to have been imported from Germany as previously suggested, and probably 'outfitted' by cutlers in England by mounting in locally made hilts. As the Cutlers Co. was far more limited in its scope and powers in my view at least, it is doubtful this FDL had anything to do with that organization as a universal mark. The mark used by them in the 17th century was a dagger (more of a sword) which was to accompany the registered cutlers mark. With Solingen innovation, I believe that the FDL (fleur de lis) as an accommodation toward marks using this device well established by then in England. With then strong ties between English and French gentry and possibly even more esoteric connections it seems possible that the mark had even deeper connotations. |
![]() |
![]() |
![]() |
#13 |
Member
Join Date: Jul 2006
Location: Buraimi Oman, on the border with the UAE
Posts: 4,408
|
![]()
An amazing thread !! More !!
I know less than nothing about these European weapons ... however, I did find this at http://www.cullodenantiques.com/page...d-weapons.html to whit there appears an equal Fleur de Lys below from that weapon not an English Dragoons Basket Hilted Backsword but a Scottish Troop Horse Grenadiers Sword ![]() OOPS...!! This I note has already generally been pointed to earlier at #6.. but I make the correction. I note also at #9 some arabic to the blade which is a variation on the "God is Great" theme but stacked half sideways... Ibrahiim al Balooshi. Last edited by Ibrahiim al Balooshi; 9th June 2014 at 05:49 PM. |
![]() |
![]() |
![]() |
|
|