LUMAD BAGOBO BOLO

[tanaruz]

My dear friends,

I've recently acquired this piece. It is a bolo kampilan from a lumad tribe in Mindanao. There's no handle; the blade was rusted and some issues on the scabbard.

But it is an old piece and I would like to have it restored.

1) is this a Bagobo bolo? without the handle, my only reference would be the scabbard's style (which is somewhat similar to a Bagobo bolo I have) and the cloth (scabbard's mouth).

2) issues: I soaked it overnight on white vinegar and in the morning, most of the rust just melted away- except for some areas on the blade (blackened areas) I was trying to distinguish if these spots are pitted areas, and yes, there's little pitting. But why is it the rust won't go away? what's best to remove this? would sanding help?

3) what handle design would fit this lovely piece have when it was pristine?

4) I have noticed that the tang is a bit short?

Thank you in advance and be safe

Yves

[Sajen]

Originally Posted by tanaruz

I've recently acquired this piece. It is a bolo kampilan from a lumad tribe in Mindanao. There's no handle; the blade was rusted and some issues on the scabbard.

But it is an old piece and I would like to have it restored.

1) is this a Bagobo bolo? without the handle, my only reference would be the scabbard's style (which is somewhat similar to a Bagobo bolo I have) and the cloth (scabbard's mouth).

Hello Yves,
I would say yes, it's a Bagobo bolo/kampilan. See attached pictures taken from other threads, not my ones.

Originally Posted by tanaruz

2) issues: I soaked it overnight on white vinegar and in the morning, most of the rust just melted away- except for some areas on the blade (blackened areas) I was trying to distinguish if these spots are pitted areas, and yes, there's little pitting. But why is it the rust won't go away? what's best to remove this? would sanding help?

It simple need a longer soak, there you will have later pitting I guess. When you sand it you will need to sand the complete blade, a time consuming undertaking, most of the time worth the effort.

Originally Posted by tanaruz

3) what handle design would fit this lovely piece have when it was pristine?

Look again to the attached pictures, there will be other examples in older threads. But most Bagobo swords I've seen with such a scabbard have had handles like the shown examples.

Originally Posted by tanaruz

4) I have noticed that the tang is a bit short?

Indeed! But can't say something about this, never before I've seen a Bagobo sword without handle. Look the tang broken? A close-up?

Regards,
Detlef

[Marbel]

Hello,
As noted, very hard to tell without the hilt. However here's a vote for Blaan.

Thank you,
Craig

[Sajen]

Originally Posted by Marbel

As noted, very hard to tell without the hilt. However here's a vote for Blaan.

Hello Craig,

I know that you collect Lumad blades and guess that you are better informed as I am, would you call the three above shown examples also Blaan swords?

Regards,
Detlef

[Marbel]

Hello Detlef,
I would actually think of the pieces you've shown as Blaan. That being said, I think it's important to recognize that the sword itself and the scabbard are two different things and often have very different origins. One might also add the hilt as a seperate consideration as well. Due to trade, battles, repairs, inter-marriage, etc. these three elements of any piece might take on a mix-match appearance. The Tboli, Blaan and Bagobo (more knowledgable collectors may also include the Kalagan,Tagakaolo and others) all interacted and still do. The Tboli and Blaan very closely, similarly the Blaan and Bagobo. Each have very distinct and identifiable elements to their weapons and scabbards, however each often carry a blend as well. I have relatively little knowledge of the blades themselves and certainly many of these were Moro in origin. The hilts and scabbards offer more clues to me and these old photos, taken and notated in situ can offer unique insights. I think we're all relatively confident when we see a 'true' Bagobo piece with its specific hilt, scabbard and blade design. A distinct Tboli hilt and scabbard is hard to miss as well. For me, the distinctness of the Blaan is found in the scabbard and the elegant yet simple hilt.

I continue to look forward to learning more from my own research but especially from those who read this board and who have much more knowledge and experience than I do.

[Ian]

Originally Posted by Marbel

Hello Detlef,
I would actually think of the pieces you've shown as Blaan. That being said, I think it's important to recognize that the sword itself and the scabbard are two different things and often have very different origins. One might also add the hilt as a seperate consideration as well. Due to trade, battles, repairs, inter-marriage, etc. these three elements of any piece might take on a mix-match appearance. The Tboli, Blaan and Bagobo (more knowledgable collectors may also include the Kalagan,Tagakaolo and others) all interacted and still do. The Tboli and Blaan very closely, similarly the Blaan and Bagobo. Each have very distinct and identifiable elements to their weapons and scabbards, however each often carry a blend as well. I have relatively little knowledge of the blades themselves and certainly many of these were Moro in origin. The hilts and scabbards offer more clues to me and these old photos, taken and notated in situ can offer unique insights. I think we're all relatively confident when we see a 'true' Bagobo piece with its specific hilt, scabbard and blade design. A distinct Tboli hilt and scabbard is hard to miss as well. For me, the distinctness of the Blaan is found in the scabbard and the elegant yet simple hilt.

I continue to look forward to learning more from my own research but especially from those who read this board and who have much more knowledge and experience than I do.

I think Craig has summed up the issues faced with identifying Lumad swords, There has been a lot of mixing of styles, and in addition to the points Craig raises one really needs to look too at the style and quality of the brass fittings, especially on the hilt; the presence of typical beads on the scabbard (a frequent indicator of Bagobo work); and the nature and designs of fabrics used on the scabbards. In regard to the latter, I think the book From the Rainbows Varied Hue, edited by Roy Hamilton, is a good reference for identifying the ikat, etc. of Moro and Lumad groups.

[Sajen]

Originally Posted by Marbel

Hello Detlef,
I would actually think of the pieces you've shown as Blaan. That being said, I think it's important to recognize that the sword itself and the scabbard are two different things and often have very different origins. One might also add the hilt as a seperate consideration as well. Due to trade, battles, repairs, inter-marriage, etc. these three elements of any piece might take on a mix-match appearance. The Tboli, Blaan and Bagobo (more knowledgable collectors may also include the Kalagan,Tagakaolo and others) all interacted and still do. The Tboli and Blaan very closely, similarly the Blaan and Bagobo. Each have very distinct and identifiable elements to their weapons and scabbards, however each often carry a blend as well. I have relatively little knowledge of the blades themselves and certainly many of these were Moro in origin. The hilts and scabbards offer more clues to me and these old photos, taken and notated in situ can offer unique insights. I think we're all relatively confident when we see a 'true' Bagobo piece with its specific hilt, scabbard and blade design. A distinct Tboli hilt and scabbard is hard to miss as well. For me, the distinctness of the Blaan is found in the scabbard and the elegant yet simple hilt.

I continue to look forward to learning more from my own research but especially from those who read this board and who have much more knowledge and experience than I do.

Thank you Craig,

Like you I am still learning about Lumad blades and your remarks are a part of my learning!

Regards,
Detlef