31st March 2024, 08:01 PM | #1 |
Member
Join Date: Sep 2017
Location: Tyneside. North-East England
Posts: 530
|
Mole court-sword conundrum
I wanted a Mole sword to form the final gasp of the entire Shotley Bridge affair, but I was looking for something a little more flamboyant than one of the tens of thousands of munitions grade swords and bayonets they produced; then I came across this one.
I fitted the bill perfectly and the blade is as good as any out of Shotley Bridge or Solingen, except I have no idea what it was in aid of. I wondered about The Tower Guard or perhaps Parliament, but these were just uninformed musings. Can anyone identify this sword please? |
1st April 2024, 04:24 AM | #2 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,940
|
Keith, this is a beauty!! and you are really hittin' it with this shopping list!
The closest thing to this anomaly is in "Swords of the British Army" (Brian Rbson, 1975. plate 91) which is loosely similar, but a pattern 1814 sword for officers on Household Cavalry. In text on p.89 it is noted the plaque with lion and crown was for Household Cavalry. Obviously with the royal cypher of Queen Victoria this sword is post 1837, and Robert Mole & Sons were not producing officers swords like this until later in 19th c. Robson notes(op.cit.p.87) that "....the introduction in 1822 of printed dress regulations for officers specified a number of different patterns of sword for the Household Cavalry but the descriptions are notably lacking in precision and there are no illustrations. Hence precise identifications are difficult". Officers swords in the 19th c. seem to have had patterns which remained in use for very long periods, and with the degree of latitude officers were allowed, especially in these elite units, it seems one off or very limited forms of hilt must have occurred, This seems of course Household Cavalry, but I can only guess it must be of a VERY limited run pattern, possibly even one off. Possibly some of the guys who are more specialized in key and well pedigreed British officers swords on 19th c. (Bryce & Radboud) might have seen another example. |
1st April 2024, 10:54 AM | #3 |
Member
Join Date: Sep 2021
Location: New Zealand
Posts: 261
|
alas it is outside of my area, but I asked a collector / dealer friend that has a lot of British swords pass through their hands and they described it as a particularly nice example of a Victorian Yeoman Warders sword.
|
1st April 2024, 02:26 PM | #4 |
Member
Join Date: Sep 2017
Location: Tyneside. North-East England
Posts: 530
|
Yeoman sword
John of JC Militaria, who sold me the sword, suggested it may be from a Tower Guard.
Thanks Guys; much obliged as always. |
1st April 2024, 08:59 PM | #5 |
Member
Join Date: Mar 2012
Location: In the wee woods north of Napanee Ontario
Posts: 391
|
Very nice sword and rare to have the diamond cross section blade type. Usually only some band swords have this type blade though I have one infantry sword with the same type.
|
1st April 2024, 10:23 PM | #6 |
Member
Join Date: Sep 2017
Location: Tyneside. North-East England
Posts: 530
|
blade
As I said earlier, the blade is a masterpiece; I don't know about a hat - but, as someone said, it could definitely be a belt. Yet it is rigid enough to stab with, and also very sharp.
They took their duties very seriously back then, before mobile phones, cctv and laser fencing. ps I'm not saying they still don't... please forgive any unintended aspersions. |
3rd April 2024, 08:55 PM | #7 |
Member
Join Date: Jul 2020
Posts: 314
|
Robert Mole.
I was looking at https://www.antique-swords.co.uk/ant...ole-p162768233 and noted the similar blade style... I also note certain Canadian swords of Robert Mole as being similar...Peter Hudson.
|
3rd April 2024, 10:06 PM | #8 |
Member
Join Date: Sep 2017
Location: Tyneside. North-East England
Posts: 530
|
Mole
Hello Peter. Thank-you, yes, a definite earlier incarnation.
I normally don't pay any attention to post 1800 swords as only Mole survived into that century... but how they survived! Tens of thousands - if not hundreds of thousands of blades produced up until 1920 when WS merged with them. I have to assume there are a great number have survived and, given the size of our empire, can probably be found all over the world. As I mentioned, I was looking for something a bit special and I certainly found it. Incidentally, regarding the beginning and the end of the Shotley Bridge history: 'Bertram' was producing the finest steel in Europe and making sword-blades at his forge in Allensford nearly 20 years before the Solingen diaspora arrived in 1687, then the Wilsons were hilting and engraving them in the village. So really, Bertram is the true beginning of the story; this is apposite because the Bertrams that moved back to Solingen, after making straight razors with a royal warrant from Victoria (we assume for Albert - but maybe not) in Sheffield, married into the poultry business in Solingen and started a company that would remain family run until the 1970s. The Hen and Rooster Cutlery company were regarded by many as the finest producers of knives and cutlery in the world: pretty good going considering they were up against everyone in Sheffield and Solingen. |
3rd April 2024, 10:24 PM | #9 |
Member
Join Date: Sep 2017
Location: Tyneside. North-East England
Posts: 530
|
ps
While I'm on the subject:
here is a straight razor from the late 1800s. In case it is indiscernible, it says: FINEST SHEFFIELD STEEL FORGED AND REAL HOLLOW GROUND IN GERMANY They were sending Sheffield steel over to, presumably Solingen, and making razors for the British market. Although I cannot link the example to Bertram, I am confident in suggesting there were Bertrams producing steel in Sheffield, then having razors made by the family in Solingen, then sending them back to the UK for sale. As I said, Bertrams enjoyed the reputation of producing the finest steel in Europe. At some point in the future I intend to establish this as fact. BTW. Bertram is an Anglicised version of the Old High German Berhtraban: a Remscheid family. |
3rd April 2024, 10:56 PM | #10 |
Member
Join Date: Sep 2017
Location: Tyneside. North-East England
Posts: 530
|
Better photo
just found a better example on this Gotta razor.
The Gotta razor, which used Sheffield steel, was made by Grah & Plumacher GmbH & Co. KG Stahlwarenfabrik. Now I have to look into their history for a Bertram. Last edited by urbanspaceman; 3rd April 2024 at 11:13 PM. Reason: added text |
5th April 2024, 09:08 PM | #11 |
Member
Join Date: Jul 2020
Posts: 314
|
Fascinating stuff at...https://www.henandrooster.com/About/ Peter Hudson.
|
5th April 2024, 11:19 PM | #12 |
Member
Join Date: Sep 2017
Location: Tyneside. North-East England
Posts: 530
|
Bertram
I know it is hardly an arms and militaria subject.
I have seriously deviated from my original thread, but Bertram was the beginning of the SB story, and he was a sword forger, so I think, tenuous though it may seem, it remains valid... just. Wilkinson Sword entered into this century making razors, so there is not so much difference, is there? I do remain enthusiastic regarding this business of Sheffield sending steel to Solingen to make razors for the British market... why would they do that? It can only be because of the quality of the steel, yet there was absolutely no decline in the output quality of Solingen products, either then or now. It's very odd. Gives me something to do. Thanks for the link to the Hen and Rooster article Peter... as it happens, I found it earlier when I first began the research into Bertram. (See you Wednesday in SB) |
5th April 2024, 11:53 PM | #13 |
Member
Join Date: Sep 2017
Location: Tyneside. North-East England
Posts: 530
|
Back to the drawing board
Here we are: confirmation of the identity of the sword that opened this thread.
|
|
|