![]() |
|
![]() |
|
Thread Tools | Search this Thread | Display Modes |
![]() |
#1 |
Member
Join Date: Jun 2021
Posts: 52
|
![]()
Is this type of grip construction on these Afghan swords (small panel of wood or bone surrounded by the metal grip) a European type of construction, or is it Caucasian in origin? The only other place I’ve seen it is on this imperial Russian shashka(last photo)
|
![]() |
![]() |
![]() |
#2 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,893
|
![]()
You do pose most interesting questions!
The Afghan military swords with this intriguing hilt style have been discussed here many times through the years, and seem to have evolved there from a form that was in use around time of the 2nd Afghan war c. 1879. They were produced at the Machin Khana from about mid to late 1880s into early 20th c.It is unclear whether at that complex itself or adjacent shops, but they typically have the Afghan state seal. I have personally always suspected the overall design of a British sword bayonet was the basis for the hilt design, and as the primary production at the Machin Khana was Enfield rifles if not mistaken. The grip material on the 'shashka' appears to be rayskin or other substitute which was a much favored affectation on Tatar sabers such as 'ordynka' from Poland and other regions with Tatar presence. Naturally this material was used by many nations for officers hilts, but in the context shown the Tatar influence came to mind. On the odd cross hatch on the Afghan grip, no idea what that might be. |
![]() |
![]() |
![]() |
#3 | |
Member
Join Date: Jun 2021
Posts: 52
|
![]() Quote:
Afghan edged weapons were influenced by both Russia and the British empire during the late 19th century and I stuggle to pinpoint which empire they veered closer to- Afghan shashkas obviously point towards the Russians, but the imitation of the Wilkinson star implies a strong British influence as well: |
|
![]() |
![]() |
![]() |
#4 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,893
|
![]()
Absolutely locally made as suggested and one in one of the local shops around Machin Khana in Kabul. I have never seen evidence of these made in the assembly lines of that factory, but sub contracting of course in the same manner as in Solingen and most sword centers was certainly present.
There these hilts were also mounted on tribal 'Khyber knife' blades for forces of the local levees who were attached to the British army . There were of course many Wilkinson swords about and the 'Star of Solomon' (not Masonic nor the Star of David) surround used to enclose proof marks on British officers swords was certainly copied. The Afghan army profoundly copied British uniforms (even kilts and Albert style helmets), used British arms and were heavily subsidized by the UK. A good book to learn more on these times, ["The Great Game" by Peter Hopkirk gives full perspective of the conflicts and political circumstances there. The shashka presence was primarily from Caucasian source, via of course the Russians. After the Murid Wars, there were many Caucasians in the ranks of the Russian army and the Caucasian officers often used their own shashkas. The Cossack shashka of course evolved from these, but the rank and file regulation forms have nothing to do with Afghan shashkas. |
![]() |
![]() |
![]() |
#5 | |
Member
Join Date: Oct 2007
Posts: 1,592
|
![]() Quote:
Hi Jim, This one of mine I would suggest falls into the above category. As you will notice it also has a totally pointless scabbard drag to further mimic European sword construction of the period. My Regards, Norman. |
|
![]() |
![]() |
![]() |
#6 | |
Member
Join Date: Jun 2021
Posts: 52
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#7 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,893
|
![]()
Indeed the phenomenon of military style hilts was an apparent popular convention of the period post Gandamak Treaty (1879) .As the British occupied Afghan regions nominally, and tribesmen of various Khyber region tribes with para military levees attached to the army often favored their own blades, these hybrid 'saylaawa' (=Khyber knife) were often seen.
Many of these hilted with the European style hits had the Mazar i Sharif stamp on the blade, presumably from hilting in these shops near the Kaar Khaana e Jangalak (Machin Khana) in Kabul. The European military style hilt seems to have been known in degree in Afghan regions as Daoud Shah is seen wearing a sword with similar hilt design at the signing of the Treaty of Gandamak, May, 1879. There were suggestions that this design was a pattern of 1889 regulation hilt, but as far as I have known that has never been substantiated. These military style swords with this distinct hilt form seem to have produced in Kabul from 1893-1903 (I have one dated 1896) but it has not been clear which units used them. |
![]() |
![]() |
![]() |
#8 | |
Member
Join Date: Jun 2021
Posts: 52
|
![]() Quote:
I think I saw a while back here someone assume the rather unique blades of the Afghan military short swords were made in solingen for some reason but by 1893 the factory had state of the art European equipment, and had the potential to make blades up to a high standard. Afghanistan by this point was totally self sufficient in the making of edged weapons- however by the 1920s the factory fell into disrepair and knowledge regressed- swords from that point on have noticeably rougher etching on the blade, and much simpler fullers |
|
![]() |
![]() |
![]() |
#9 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,893
|
![]()
The dates you note seem to be correct, and indeed the British were no longer occupying Afghan regions formally, but retained suzerainty while providing notable subsidy in various areas.
I am curious, you assert that the Afghans by virtue of the advanced manufacturing equipment were fully capable of producing these heavy, notably uniquely channeled blades by 1893....which seems the earliest date known for these military swords........have you found evidence that this equipment included that for producing sword blades? Most images I have seen of the factory works show the production of the Enfield rifles. The emphasis on the rifle production had once compelled me to think the similarity of the hilts design and construction aligned with that of British bayonets, but that notion also remains unproven. As far as I am aware, the production lines at Machin Khana were geared toward production of Enfield rifles. I am unaware of such fullering on blades for swords of this type, except perhaps for European forces such as sappers, miners and artillery gunners. It seems I had heard suggestions these Afghan swords were intended for gunners, but they also have been suggested for other issue. There were other shops in the area of the Machin Khana as I have understood which might have conducted assembly of these swords, and as they were accepted by the arsenal the state stamp of Mazir i Sharif placed on the blades. This seems likely given the fact that tribal Khyber blades are found with these hilts, and state stamped accordingly......the are Gurkha kukris known also stamped with the Mazir i Sharif mark, and obviously not produced there. BTW, do you have Dmitry Milerosov's 2019 book on Afghan weapons? Photo-my example date 1893 |
![]() |
![]() |
![]() |
#10 | |
Member
Join Date: Jun 2021
Posts: 52
|
![]() Quote:
Mind you there were quality control and production problems in the workshops due to a lack of wood to feed steam engines, but starting in 1887 the Afghans imported an entire small arms manufacturing ecosystem, they made martini Henry rifles, breechloading cannon, even Gatling guns. They also purchased half finished Krupp cannons and finished them in the Kabul workshops. Edged weapon manufacturing would have been much simpler. Many workers from British Indian factories of course were also brought there. The English scholar NR Jenzen Jones will soon release a book on the Kabul arsenal, sadly his focus is on rifles and cannon, not edged weapons As far as edged weapons go these are what were made: Officers Sabres in the Russian style Shashkas Generic Mamluke style swords British style Mamluke swords (fine details of the brass casting slightly inferior to a British made piece ) British pattern bayonets And of course those unique short swords |
|
![]() |
![]() |
![]() |
#11 | |
Member
Join Date: Jun 2021
Posts: 52
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#12 | |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,893
|
![]() Quote:
This is all exceptional information, and much appreciated, you are clearly very well informed. Honestly I am delighted to find that these edged weapons (and thank you for the itemized list) were indeed made at the Machin Khana. I had never been able to find proof that was the case. As ALWAYS, the emphasis is on guns with edged weapons seldom meriting mention as with most military oriented literature. I am thrilled to hear of this upcoming book, and hope you will keep us informed on how to obtain when released. I presume though the focus is on firearms, the details on swords regardless how minimal are mentioned as suggested. Good to know these blades on the Afghan military swords are unique as I had suspected, so your confirmation is appreciated. Also that the hilts were based on some British design (I had mentioned similarity to a sword bayonet hilt). I once tried to reach Wilkinson to discover if they in fact had any part in these hilts being so close to bayonet style, but no useful response was forthcoming. In these times Wilkinson had plenty of contracts supplying India as well as Abyssinia, so it does not seem it would have been a problem, but if the Khan chose otherwise. The Afghan shashka would of course have been unique to Afghanistan, however these have often been deemed Uzbek, which is rather a vague differentiation which I have yet to follow the particulars. Note fluted scabbard component similar to those on paluoars. If the British pattern bayonets were being produced there, wonder if the components were interchangeable for the grip, pommel, and ferrule? Some of these military hilts have had different guards, and on occasion it seems similar to paluoar types. |
|
![]() |
![]() |
![]() |
#13 | |
Member
Join Date: Jun 2021
Posts: 52
|
![]() Quote:
Basically officers could private purchase more elaborate swords to wear, as long as it matched whatever the standard issue prototype was roughly. I wonder if such a policy still existed at the same time in Europe, or if by the mid 19th century officers were only allowed to wear government issue swords |
|
![]() |
![]() |
![]() |
#14 |
Vikingsword Staff
Join Date: Nov 2004
Posts: 6,287
|
![]()
I have put this question out here before and no one seems to know.
I have to ask; have you ever seen this marking on the guard of the short sword? |
![]() |
![]() |
![]() |
#15 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,893
|
![]()
Thanks very much for the assessment on my shashka! Years ago when I got it, both Torben Flindt and Iaroslav Lebedynsky agreed on same, it was Afghan, but no specifics.
Might you have examples or photos of an Uzbek version for comparison? In looking in the example in your post #3, with the apparently faux Star of Solomon used on Wilkinson sword blades for officers.....the guard design seems to be in the manner of the British officers 'honeysuckle hilt' for heavy cavalry officers and other variations. |
![]() |
![]() |
![]() |
|
|