![]() |
Sickle Knife, India ???
4 Attachment(s)
Just picked this up and would like to know if it is a weapon or farm tool. Measuring from the end of the hilt in a straight line it is 13-1/2 inches tall. I do not have it in my possession yet but here are a few of the auction pictures. It definitely looks to be hand forged and not recently made, at least to me. Any and all help on this as to age, use and where it is from would be greatly appreciated.
Regards, Robert |
Somwhere from Nepal to the south east asian Archpeligo, Id guess.
Spiral |
Hello Spiral, and thank you very much for the information for where this might have been made. Now if only someone can help me on who it was that might have made it, whether or not it is a tool or a weapon and give me an idea of when it might have been made I would be more than grateful. Thank you again for your help.
Regards, Robert |
nepali hasiya - a fancy one.
http://www.himalayan-imports.com/ass...ges/hasiya.jpg ubiquitous farm sickle used all over nepal, usually in a wood carrier block with a string baldric, blade partially exposed. like filipino bolos, not designed as a weapon, but as an everyday farm tool. also, like a filipino farmer's bolo, i wouldn't want to tackle a person with one who has used it every day of his life for just about everything. a less fancy one with block & baldric. http://i262.photobucket.com/albums/i...I/HISickle.jpg |
1 Attachment(s)
Hasiyas in Nepal, showing the wide range of sizes and shapes as well as customary uses and carry:
|
I find it usefull to remember with kukri, That They occur through a broad range... Nepal,India, Burma at the very least.
Id Say thats the same with Himalayen Sickles. ;) Spiral |
Sickle
Hello, Anthony Tirri, in his book "Islamic Weapons", says that these sickle style knives are from Malaysia region and are called `ARIT`( page 412, figure 290 A).
Though I bought almost a similar one you have from South- India ( Kerala) and seller said that it is a farming tool ( sickle). Hope this will help. Regards, Timo |
Hello everyone and thank you all very much for your help in identifying where this is from. Timo, is there any way that you could post a picture of the example that you have for comparison? With the blade looking to be very heavy and thick I thought that it could very easily be used as a weapon. The ones that are normally seen here in the states have very thin blades and though they could also very easily be used as a weapon they would certainly not be my first choice if having to use a farm tool. Again my thanks to all who have responded to my questions and I will post new pictures after this has arrived and I have had a chance to do a little cleaning on it. Would anyone like to make an estimate on the age of this item?
Regards, Robert |
Hi, I gave mine to my brother but I`ll ask him to take some pictures and send them to me. I think that late 1800/beginning of the 1900. I also wondered the thicknes of the spine,
its more like tool to clear up bushes etc. Regards, Timo |
Hi Robert,
Not my area of expertise but there is an Indian knife called a BANK which is of sickle shape. Regards Stuart |
Hello Stuart,
Quote:
Regards, Kai |
Hello Timo,
Quote:
Quote:
Regards, Kai |
Quote:
|
Hello Robert,
An interesting one again! Quote:
Quote:
Regards, Kai |
Hello Kai and thank you very much for your thoughts on this item. I hope that Timo can get his brother to send pictures of his example to post for comparison with mine. Your estimate of age is greatly appreciated but could you be a bit more exacting on when it might have been made, 1st, 2nd or 3rd quarter of the twentieth century? Again my thanks to everyone for their help on this.
Regards, Robert |
9 Attachment(s)
Well this showed up in the mail today so here are a few new photos. I'm not sure if they are any improvement over the originals though. The blade is slightly over 1/4 inch thick where it meets the decorative piece. This is definitely a hand forged piece complete with plenty of hammer marks up and down the blade. I agree with Kai and believe this to be a ceremonial item. Any comments and opinions on this would be very welcome.
Regards, Robert |
4 Attachment(s)
I have several of these, one bought with some other tools (from the Indian subcontinent), and seen several others. Mine are not to hand, but I have a couple of images of some sold in France a year or two ago, plus a few others of similar tools...
Sorry I cannot be more specific, but at least you know it is not a unique piece, and that the method of construction (a steel blade inserted into an ornamented iron stock) was common in some (unknown) region... As three turned up in France (and I also bought one of mine there) they may be from the French speaking regions of Puducherry or Chandannagar on the eastern coast of India (see: http://en.wikipedia.org/wiki/Indian_French) Note images 3 and 4 are from different tools (4 was sold without a handle) - the other seem to have a teak like wooden handle... (site has just changed order of images - now images 1 & 2) |
3 Attachment(s)
what about this.............jimmy
|
Can you please add a full side on image to the above?? It may help to identify its origins... I would class this as a billhook (or pruning hook/tea hook) - the tool in question is almost certainly a harvesting sickle...
|
I am amazed at how closely this item resembles Spanish colonail pieces with some of their decoration, design, tooled handle. The decorations nearly exactly match those found on Spanish colonial swords. My Brazilian espada, discussed at length in other threads, has the odd star patterns and line designs like these. Furthermore, on many espada ancha, we see the odd hook-like protrusions like those found on these. Some of the protrusions on espada go a step futher by making them into snakes. On Billman's example, we see the Moroccan-style flyssa-type hilt on one of these pieces. This exactly matches the Brazilian cutlass patterns, as seen on this site and in museum collections. I understadn that many of these themes were borrowed and found in other cultures, but could one theorize that at the very least, we see a cross-over of cultures with these pieces? My .2 cents.
|
Hi, I collect billhooks - now have over 6000 from various countries and continents - one thing I have noticed is parallel development in shapes, handles, methods of construction etc. Japanese and Chinese billhooks are very similar to European ones - they have had them for at least as long as we have had in the West (at least 2000 years). Ditto those from India and Africa, in fact almost any civilisation that has had iron working in its development.
Similar parallel development can be in other basic hand tools: sickles, axes, adzes & hammers and in weapons: spears, swords, bows & arrows... The same is probably also true in respect of ornamentation/decoration e.g. scroll work, inlay and incised decoration. I have decorated billhooks from several different countries - certain types of decoration are common in tools from widely separated areas, especially punched (or chiseled) lines, curves, whorls, stars and combinations thereof... My best guess is that tools of this type were used by women on a daily basis. India has a tradition of decorated tools, especially sickles. These may have been part of a marriage dowry, or a gift from the groom to the bride. Judging by the degree of wear on some of the blades, they were regularly used over a long period of time. Searches of images for rice or grain harvest show mainly women working in the fields - the men undertaking the heavier tasks such as ploughing the land.... |
more photo's
2 Attachment(s)
pretty fancy for a farm tool............jimmy
|
Hi Jimmy
At first glance of the blade shape, I would say Italian, maybe Austrian - chip carving is common on items from the European Alps, and a mushroom type handle although rare in Italy, is not unknown. Having said that it could be Asian - without provenance it is very difficult to accurately place a tool that is found worldwide, is often rehandled, and that was often exported or taken overseas by colonists. The handle decoration is not something I have seen before, but is typical of the sort of work done in rural communities, either to pass the time, or to personalize an object. I guess this is (or was) a common practice worldwide - before TV, radio and mobile phone there was not a lot to do in the long winter evenings... In the second image, there appears to be some marks on the blade.... These may help in identifying its origin, as would close examination of the blade to look for forging marks, weld lines etc. Identification of the wood of the handle may also be an aid to origins - beech and light woods are more common in Europe, teak and darker woods in Asia (but there is no hard and fast rule, as handles are often made of any wood that is handy - the Japanese use white oak) |
5 Attachment(s)
As far as decoration on a tool to be used, below some Indian sickles from the same region (Punjab)... One older one highly decorated with a forged blade, and one new factory made one (right of image).. together with some made with an old saw blade held in a wrapped around back..
|
THE SICKLE AND BILLHOOK HAVE A HISTORY PREDATING THE METAL VERSION IN SOME SOCIETYS. THE OLDEST AUTHENTIC EXAMPLE I HAVE PERSONALLY SEEN WAS IN THE MUSEUM AT CAIRO EGYPT. IT WAS WOOD IN SCYCLE SHAPE WITH A GROOVE ALONG THE INSIDE CURVE INSET WITH CLOSELY SET FLINT BLADES TO FORM A GOOD CUTTING EDGE.
|
Quote:
|
no marks, nice horn collar, very heavy blade and sharp, i think its from india what do you all think.................jimmy
|
Quote:
Identifying the origins of this only emphasises the need for provenance with a tool as certain tools are generic and found in many continents and countries.. I have built up an archive collection of several thousand images, and have over 6000 billhooks - yet I cannot identify the origins of this one with any degeree of certainty.... |
water bufala* are commonly used to supply mozzarella cheese to a horde of hungry italians and inhabitants of other western countries who have become addicted to pizza and grilled slabs of mozzarella. it has a higher melting point than other cheeses and can be grilled or bbq'd. (some inferior non-italian 'mozzarella' is made from cow's milk - caveat emptor)
i thus imagine buff horn is fairly common in italy, as it is in nepal or india/SEA. * - italian for the female buffalo. male buffalo milk is unsuited to making edible cheese. they are also harder to milk and the resulting milk is highly perishable, so is kept at cryogenic temperatures and used almost exclusively for making additional buffaloes. :) |
thanks, i've cleaned it and it does look european/italian, say billman how about some photo's................jimmy
|
You learn something new each day:
Bufala mediterranea italiana, is the only indigenous Italian breed of water buffalo.It is of the River subtype of water buffalo, and is similar to the buffalo breeds of Hungary, Romania and the Balkan countries. Previously considered to belong to the Mediterranean buffalo grouping, it was officially recognised as a breed in 2000, based on its long isolation from, and lack of interbreeding with, other buffalo breeds. A herdbook was opened in 1980.... Not sure how their horn compares with other breeds of water buffalo - but if solid, not a lot of good for ferrules. Jimmy, I'll try to find some comparable images, but if you could take a) an image at 90 degrees to the blade, and b) a close up of the marks on the blade, it would help.. |
5 Attachment(s)
i hope this will help......
|
1 Attachment(s)
Many thanks - the weld line on the blade is very typical of European billhooks - a steel edge forge welded onto a wrought iron body (this process was continued well into the 20th century). The blade shape is not a coomon one, nor is the handle... The best match for a blades shape is that of an Italian decorated one sold a few years ago (with a rather nasty brass handle fitted)... I'll try to find more examples...
|
Quote:
n2s |
Tea knives/pruning hooks tended to be quite small - blades about 6" long - but all pruning prior to the invention of the secateur c1830 was carried out using a small billhook/pruning hook, so it could be used for any sort of pruning: fruit trees, bushes, roses, berry plants - as well as for hedging and coppicing work - a true 'jack of all trades' type of tool...
|
Buffalo {of all types.} cow, goat, bull, sheep & ram are all hollow at the base of the horn, & have varying amounts of solid horn towards the tip, water buffalo having the greater proportion solid though compared to the other species.
Spiral |
Hi Manteris1 - the more I look at this tool the more I think it may actually be Spanish in origin - no reason I can think of, just a gut feeling..
|
All times are GMT +1. The time now is 09:18 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.