![]() |
![]() |
#1 |
(deceased)
Join Date: Dec 2004
Location: East Coast USA
Posts: 3,191
|
![]()
Picked this up yesterday it needs some TLC but should turn out nice. Btw it's 37" long.
|
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Oct 2007
Posts: 2,818
|
![]()
A nice and interesting example Lew, the size is what I find interesting, something that would sit well in either my clubs or cane collection...
Of the woven wire bands, I have seen many with this binding, some with little such as this example, others with fully covered shafts and others with a variety of metals used too. Is anything to be learnt from the variety of bindings and materials used? Gav |
![]() |
![]() |
![]() |
#3 |
(deceased)
Join Date: Dec 2004
Location: East Coast USA
Posts: 3,191
|
![]()
Gav
Some of the wire work is attributed to the Shona and some other Zulu tribes. I have one that I was told was from the Natal area. |
![]() |
![]() |
![]() |
#4 | |
Member
Join Date: Oct 2007
Posts: 2,818
|
![]() Quote:
Gav |
|
![]() |
![]() |
![]() |
#5 |
(deceased)
Join Date: Dec 2004
Location: East Coast USA
Posts: 3,191
|
![]()
I have to have it in hand first But I am leaning toward Natal.
|
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Apr 2009
Location: USA
Posts: 17
|
![]()
Nice Piece, I was the next highest bidder!!
![]() |
![]() |
![]() |
![]() |
#7 |
(deceased)
Join Date: Dec 2004
Location: East Coast USA
Posts: 3,191
|
![]()
The Knobkerrie arrived today. I cleaned it up a bit and it turned out nice see below. It's more a walking stick type knobkerrie than a war type as in the picture above. It is made of the bicolored wood but the lighter part is darkened with patina. All in all a very elegant stick.
![]() |
![]() |
![]() |
![]() |
#8 |
Member
Join Date: Dec 2004
Location: Greenville, NC
Posts: 1,855
|
![]()
Nice one Lew...I just love these too. Seems no two are ever just alike.
Great photos as well. Thanks! |
![]() |
![]() |
![]() |
#9 |
Member
Join Date: Jun 2006
Posts: 165
|
![]()
Nice one!
Having recently acquired a taste for these, I'd love to know what you used to clean the wire binding. Thanks. |
![]() |
![]() |
![]() |
#10 |
(deceased)
Join Date: Dec 2004
Location: East Coast USA
Posts: 3,191
|
![]()
I used a wire brush to take off the heavy rust on the wire wrap. Followed it up with a good cleaning with a magic cloth and some 0000 steel wool. After that I rubbed on a tiny bit of mineral oil making sure to wipe off any excess. As far as the wood is concerned the 0000 steel wool was used to remove some old paint spots you must do this very carefully with the slightest pressure as to remove the paint and not ruin the patina. Last I applied a bit of brown or neutral kiwi paste shoe polish and buffed it up with a horse hair shoe brush.
|
![]() |
![]() |
![]() |
#11 |
Member
Join Date: Jun 2006
Posts: 165
|
![]()
Thank you!
|
![]() |
![]() |
![]() |
|
|