Sword briquet

Multumesc · 13th January 2021, 07:44 PM

I have this sword.According to the signals, it seems to be a FRENCH MODEL 1790.I find it interesting that,the blade is not sharp along its entire length, .It is only half sharp,to the tip of the sword.What is the explanation .Or were some swords distributed to the soldiers, unsharpened??Were some swords made that way? Thanks.

Multumesc · 13th January 2021, 07:48 PM

.

David R · 13th January 2021, 09:53 PM

Sharpening a sword is like loading a gun, it is only done in a western army when ordered by the command, it's a court marshal offence ( usually) to do so without permission As for where a blade is sharpened, because of differences in martial techniques, Western swords tend to be sharpened in the foible, and Eastern along the full length.

M ELEY · 13th January 2021, 10:12 PM

Very nice briquet. As discussed before with these types, many were infantry swords, but some definitely were for sea service. It is an interesting side note that many boarding cutlasses did NOT have a sharpened blade except at the extreme tip. The reason for this is that in the close quarters of a ship, a favorite tactic was to strike for an opponent's head with the 'dull' end, knocking them senseless, splitting their scalp open and taking the fight out of them. This was such a common tactic that the Americans came up with a leather padded boarding helmet to cushion the noggin. Maritime reports of battle injuries from tactics such as this show many head injuries, concussions, fractured skulls, etc. A full slash on a crowded deck was often impossible, but an overhead bashing was more practical. Does your sword have any stamps on it, perhaps of a tiny anchor?

Jim McDougall · 13th January 2021, 10:33 PM

As David has noted, one of the biggest problems with military swords was the fact that they were often, if not typically, inadequately sharpened. In India, it is noted that the British cavalry had been dissatisfied with the cutting power or lack thereof of their sabers. They were dismayed at the horrifying cuts of the native warriors swords, only to discover that their swords carried blades from now obsolete M1796 sabers, but honed razor sharp and well oiled, kept in wood scabbards.

In the American Civil War, the cavalry was inadequately trained with the M1840 heavy dragoon saber (why it was called the 'old wristbreaker' ) and the inclination for sharpening was as noted, only as per ordered. Discipline among ranks was not exactly impressive, and men were inclined to worry more about guns than swords.
Literature I have read on sword injuries in the Civil War indicate few, hardly any, sword cut injuries, and those reported were 'blunt force trauma'.

As Mark well indicates, the use of a sword pommel or upper blade as a blunt weapon is more than common in close quarters melee, which would often be the case on ship decks.

midelburgo · 15th January 2021, 01:59 PM

After some reports along two centuries, the main use infantry troops gave to these swords was to chop wood for preparing their meals as there were not central kitchens. For wood, it is probably best a not too sharp edge.

kronckew · 15th January 2021, 07:24 PM

Quote:

Originally Posted by M ELEY

Very nice briquet. As discussed before with these types, many were infantry swords, but some definitely were for sea service. It is an interesting side note that many boarding cutlasses did NOT have a sharpened blade except at the extreme tip. The reason for this is that in the close quarters of a ship, a favourite tactic was to strike for an opponent's head with the 'dull' end, knocking them senseless, splitting their scalp open and taking the fight out of them. This was such a common tactic that the Americans came up with a leather padded boarding helmet to cushion the noggin. Maritime reports of battle injuries from tactics such as this show many head injuries, concussions, fractured skulls, etc. A full slash on a crowded deck was often impossible, but an overhead bashing was more practical. Does your sword have any stamps on it, perhaps of a tiny anchor?

it's quite common for the forte to be unsharpened, thus better for parrying an opponent without notching your blade, the foible would be sharp, especially the 'sweet spot'. Thrusting swords might even only have the first 6 inches or so sharp, as that's more than enough to kill.

13th January 2021, 07:44 PM	#1
Multumesc Member Join Date: Feb 2012 Location: Romania Posts: 203	Sword briquet I have this sword.According to the signals, it seems to be a FRENCH MODEL 1790.I find it interesting that,the blade is not sharp along its entire length, .It is only half sharp,to the tip of the sword.What is the explanation .Or were some swords distributed to the soldiers, unsharpened??Were some swords made that way? Thanks. Attached Images

13th January 2021, 07:48 PM	#2
Multumesc Member Join Date: Feb 2012 Location: Romania Posts: 203	Sword briquet . Attached Images

13th January 2021, 09:53 PM	#3
David R Member Join Date: Jan 2011 Posts: 1,079	Sharpening a sword is like loading a gun, it is only done in a western army when ordered by the command, it's a court marshal offence ( usually) to do so without permission As for where a blade is sharpened, because of differences in martial techniques, Western swords tend to be sharpened in the foible, and Eastern along the full length.

13th January 2021, 10:12 PM	#4
M ELEY Member Join Date: Dec 2004 Location: NC, U.S.A. Posts: 2,101	Very nice briquet. As discussed before with these types, many were infantry swords, but some definitely were for sea service. It is an interesting side note that many boarding cutlasses did NOT have a sharpened blade except at the extreme tip. The reason for this is that in the close quarters of a ship, a favorite tactic was to strike for an opponent's head with the 'dull' end, knocking them senseless, splitting their scalp open and taking the fight out of them. This was such a common tactic that the Americans came up with a leather padded boarding helmet to cushion the noggin. Maritime reports of battle injuries from tactics such as this show many head injuries, concussions, fractured skulls, etc. A full slash on a crowded deck was often impossible, but an overhead bashing was more practical. Does your sword have any stamps on it, perhaps of a tiny anchor?

13th January 2021, 10:33 PM	#5
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 9,957	As David has noted, one of the biggest problems with military swords was the fact that they were often, if not typically, inadequately sharpened. In India, it is noted that the British cavalry had been dissatisfied with the cutting power or lack thereof of their sabers. They were dismayed at the horrifying cuts of the native warriors swords, only to discover that their swords carried blades from now obsolete M1796 sabers, but honed razor sharp and well oiled, kept in wood scabbards. In the American Civil War, the cavalry was inadequately trained with the M1840 heavy dragoon saber (why it was called the 'old wristbreaker' ) and the inclination for sharpening was as noted, only as per ordered. Discipline among ranks was not exactly impressive, and men were inclined to worry more about guns than swords. Literature I have read on sword injuries in the Civil War indicate few, hardly any, sword cut injuries, and those reported were 'blunt force trauma'. As Mark well indicates, the use of a sword pommel or upper blade as a blunt weapon is more than common in close quarters melee, which would often be the case on ship decks.

15th January 2021, 01:59 PM	#6
midelburgo Member Join Date: Jun 2005 Posts: 257	After some reports along two centuries, the main use infantry troops gave to these swords was to chop wood for preparing their meals as there were not central kitchens. For wood, it is probably best a not too sharp edge.